Community Brag Posts

Built for my sisters house. I pulled a pic of a mission style table from the internet and then matched the details to her existing hutch. Color match took some work!

Just a tip for Florida folks. If it is humid and raining...stop and wait for another day to stain and poly. Trust me.

I made a few modifications that I think people starting this project may want to know. 1. 4x4 box gets a little tight for more than one kid. I chose 4x6 so that the bench dimensions would scale up to 3 slats per section correctly, but the length of 1x4 boards would not have to be lengthened, which would required additional support. 2. As a rule of thumb, any outdoor lumber that may have prolonged exposure to water (IE. Touching the ground) should be pressure treated. I couldn't find 1" thick treated boards, so the box uses 2x10 boards. 3. Used a redwood semi-transparent stain.

Farm house coffee table. I painted the bottom black and stained the top a dark gray color. I don’t ask happily surprised on how easy it was to build this table and how strong and sturdy it is! From start to finish it took me 9 hours, paint and all. Highly recommend this plan.

This was a Baby Gift for my sister and her little boy, Xander who was born just a couple weeks ago. I wanted to do something special that would last for my sweet nephew. She found a bookshelf similar to this on cool-rooms.com and we decided to try to make our own version. I've posted about it on my blog if you're interested in the process.

This is our first project from the site and we are in LOVE with our table. We spent a few weekends building it and another weekend staining. We always wanted a table large enough to seat a big group for holidays or events. We can seat 10 comfortably (4 on each side with smaller chairs and 1 on each end.) Not only was this inexpensive (around $100 total), but it is a great sense of pride in our house. Knowing we built this with our own hands and telling others that we did so is amazing.

http://ana-white.com/2009/12/plans-farmhouse-table-knock-off-of.html

I built this dollhouse for my daughter's sixth birthday. It was a great experience and my first time using a KregJig. I ventured from the plans a bit and built cantilevered staircase with dollar store Jenga-type blocks.

I got so inspired by Ana White I just assumed I can make anything just like her :D
But deep inside I knew, I wasn't nearly as good as her :(

So when we needed a bar table of definite length and height and type and color and way out of our budget, I thought to myself "hey girl! you can do this ;)"

So I came up with this super easy plan.
You can read all about it from the link below

http://tinyurl.com/pkntwa9

Built from the

Farmhouse Table - Updated Pocket Hole Plans.  I used pine for all the wood, painted the bottom with white

Valspar Storm Coat, and table top with Miniwax Red Mahogany stain. 

It's not purfect but, it turned out great.

Lessons learned

I need is a planer to make the boards straight, Belt sanding took a long time.

A media cabinet made from Curly Maple. Used biscuit joints for the corners, and face-frame for the fronts. Sliding glass doors riding on fiber glass rods. And glass shelves too (except on in the middle)

This is an antique oak dresser I recently purchased. I had some rebuilding to do. I replaced the bottom and fixed/rebuilt the dovetail drawers. I did replace the veneer on the top two drawers. It isn't a difficult task. Just ask and I will explain the process. I do wish though that I had gone online and purchased some quarter sawn oak veneer. It would have matched better than what I purchased from a local home improvement store. I replaced all of the hardware. I purchased it from Kennedy's online. The hardware finish is called aged brass. If you have solid brass hardware you can purchase a "brass ager" quite cheaply. There was a mirror attached to the dresser at some time. I am going to build a mirror to match that I will hang on the wall above. I am also looking to build a back splash for the back of the dresser. I think I may purchase an antique oak pediment (decorative door header) to make the back splash from.

I built the table to fit my space and made a few changes!

This was our first attempt at making furniture and even though the difficulty rating was ‘intermediate’, the detailed instructions made the process less complicated. Our version of Anna White Essential Entryway Bench turned out better than we expected! Once it was built, I stained it grey, painted it white, then distressed it to make it look antique. I added a custom made foam cushion to the top and, voila!

TammyA

This is my second build. I used the Benchright plan but had to modify it for one drawer. The Dimensions are 39 long, 25 wide, and 19 tall. I have heard others comment on how difficult drawers are. I thought I would just jump in head first with the kind of drawer that closes flush with the rest of the table - really had some trouble with making it square. I ended up shimming the face onto to the drawer because even though it opens and closes smoothly, it isn't square with the rest of the table...

I had originally planned to make the 20 second tidy up table for my living room and begun purchasing materials. However, I was let go from my job last Sunday, so changed my plans. I took inventory of all the supplies and materials I had on hand and tried to find a plan that would not require any more spending to build... to sell... to pay rent.... and thus the new table was born. And I love it. And I hate to sell it.

I tried to copy the finish on the 20 second tidy up table, and this is how it ended up. I used Minwax Golden Pecan for the base color and Red Oak for the accent color. The colors got a little blended together through the staining process. I really love how it turned out though because it's a nice warm color. The only thing I don't like is the grain in the pine didn't take much if any color, so it's still a bit yellow, which seems slightly out of place when I look at it. I think it will darken with age and look a little better. Otherwise, this was a super fun project!!

The first of hopefully many more projects to come!

This is the second bench made from these plans. For this bench, I altered the plans, decreasing the length from 55" to 36". I'm a little uneasy about using the jigsaw so I did not taper the legs. I love this bench it fits very nicely into our  warehouse loft apartment.