Community Brag Posts

Inspired by Ana's Pull-out Cabinet Drawer Organizer I made pull-out drawers for all of my lower cabinets and for my pantry cabinet. My pantry cabinet is 22" deep which makes it very easy to eventually come across soup that expired four years ago, or to find three bags of sugar when I thought I was out. The pull-out drawers make it so easy to access and organize everything in the cabinets. Absolutely love them! In the organizing spirit I also made spice racks for the cabinet doors and hangers for measuring cups/spoons. The hardest part for me was installing the drawer slides - they have to line up perfectly!

This is the first in a series of crates I’m building for my Expedit. It’s made from wood from the scrap pile behind our garage, so it cost nothing for the wood. It set me back fifty cents for the handle, which I sprayed with chalkboard paint. I plan to make six, but ideally I would fill all sixteen cubes up. I was totally inspired by Vicki from Made at This Place, with her Chalkboard Produce Crates for her Expedit. Thanks Vicki!

This is my first wooden cutting board. I used a combination of walnut, curly maple, and walnut.

I needed a shoe rack that would work for our limited space and the Laundry Tower that was on the brag post caught my eye. It was modified from the Open Frame Laundry Basket Organizer. This shoe rack is working great for our family now! Thanks for this community!

Hallelujah!! Finally, somewhere to store all our alcohol-related necessities :) We adapted Ana's Benchmark Storage Unit to work as a liquor cabinet. We kept the basic design the same, but added some stemware storage across the top (a feature we loved in a Crate and Barrel liquor cabinet that was $$$$$) and some decorative molding to bulk it up a little bit. We lovvvvvve it! Thanks Ana!

PS: everyone please check out our blog for more details on this and other projects!

http://strawbridgestuff.com

I had inherited some bed frame wood from our local Re-store and have been working it into projects here and there. We needed some actual night stands and I loved the look of the Reclaimed Look Wood Nightstand, but they were a little too tall for our bed. The height of the original plan is 28" and I ended up taking out one drawer for a total height of 20". I also found two sets of drawer slides at the Re-store and decided that an open shelf on the bottom would better suit our needs, so I crossed the reclaimed plan with the farmhouse plan to create a shelf on the bottom. The bottom is built the same way that the sides are, but attached so that the 2x2 is on the underside.

I didn't have enough wood from the bed frame to make two full tables, so I used Douglas fir 2x2's for the legs (the best the local big box home improvement had that day for my price) and white board for the table tops and every other board for the sides and shelves. This was my second real building project, so they were really easy to put together, but it was a lesson in making everything super square because of the drawer slides. The finish I used also goes great with a 130 year old dresser that you can see a bit of next to the finish table. The wood only needed one coat to reach the color closest to that dresser and it hid the fact that I used three different types of wood in this project. Overall they are just what we needed in this space. The bed frame is IKEA, but I am thinking about making the Reclaimed Look Bed Frame to match the tables in the future.

My version, with a top shelf added, and the legs made of a 2x6 with a trimmed 2x4 added to make the L shaped leg.

My kid-o's love to sell lemonade. So, we made a trip to the local hardware store. Because I am terrified to use my husbands electric saw, any wood we purchased would have to be cut with a hack saw and a miter box. And since the stand is to be stored in the backyard, we opted to build it from cedar. We ended up purchasing 8 fence pickets for about $15 total. This was also to be a great way for my kids to apply the some of the knowledge they have picked up this year, our first year of homeschooling. My children, ages 7 and 9, measured all of the boards that needed to be cut. It turned out GREAT! We already had some extra boards, spray paint and screws on hand; so, the grand total was $15.00 for the entire project!

Wanted to make a Day bed for my daughter. Found the plans and found to be very affordable. Had a great time building it, and the reaction to my daughter when it was finished was the best

I have wanted a Restoration Hardware bed for so long. Now I have "one" but for way less and we did it all ourselves. starting with Ana's platform bed plans we build on it and walk through the process and even the custom 3 part finish. for a full tutorial please see my blog. http://imperfectlyimaginable.blogspot.com/2013/11/restoration-hardware-…

would love to hear from you and see any projects that are completed.

This project took me no time at all. If you pick up straight boards and purchase the legs, this shouldn't take more than a few hours to build.

Tryde Console Table. First project undertaken. Decided to make a bottom shelf. Used 4 1x4s and notched the middle two to fit around legs. Being that is was out first project, we had a few problems with keeping everything square and level but with a few minor tweeks it ended up looking really good.

We are a foster family which means we have a large family. The Mrs. wanted a large table to fit 8-10 people, so off to ana-white.com i went.
Plans were perfect! Made one long 96" bench and two 42" benches from the same plans. I changed it up a bit by adding a perpendicular plank on the ends and trimmed it with 1x2's for look and strength. 2 coats of stain and 2 coats of polyurethane. Just in time for the holidays! Thank you again for the plans, this is the third thing I have built.

This was a lot of work and a bit of frustration but now that it's done it was well worth it!!

We followed Ana's plans but went 1 ft taller on the pony walls to increase the height. We are so impressed with how it turned out. I'm excited to grow plants in Northwestern Ontario.