I installed the shelves and the center dividers with dados. I suggest planning ahead for your hinges, I had a rough time finding the perfect hinges for some reason.

A big, big, BIG suggestion though, is to stain BEFORE assembly!! I nearly destroyed the piece with the difficult staining in the inside corners. It is very difficult to keep stain even in them. I used General Finishes "Black Cherry" water based stain, the first time using a water based stain. I found it very unforgiving and it left bad blotches, brush and rag marks. I topped it with General Finishes Arm R Seal.

In the end, this came together well enough that I felt a little guilty for not using better lumber than pine. It's nice enough, I think, to warrant spending a little more on quality hardwood.

Simple Modern Toy Box with Lid

-made with pine.

- paint was matched at Sherwin Williams to other furniture.

Cute farmhouse x style night stand with hidden storage.

I made this TV Stand for the family that bought the coffee table that I made before. I loosely based the design from a medley of things on the site, but ended up drawing up plans myself in Sketchup.

This took a while because I had to think through alot of the design things - like how to best do the glass panel doors and how to compensate in the plans for some bowing in the plywood.

It is basically a plywood box, trimmed out like most of the things we DIYers do.

My biggest challenge in this project was cost... I severely underestimated how much it would cost me to build it, so I ended up with only $50 profit on the job... Does anyone have suggestion.. if you are building things to sell them how do you price your products? Just curious.

With Spring near I decided it's time to finally make some vegetable boxes. These plans were super easy, and easy to add a few little features.

I live in Oregon and even though cedar is tough, with all the rain we get, the color fades fast!! I was also worried about the inside rotting away from the solid like you see at the bottom of a fence!

I was surprised there weren't a million different stains that were "Organic" with that be so popular. I new my kiddos would eat most of the stuff before it made it into our house, so I decided to leave the inside natural and line it with heavy duty visqueen.

I stained the outside to protect the wood, using some Australian Timber oil I had left over from another project!!

My Kid loved his new bed, I made an extra storage for his toys in the space under the bed so he can play.

"Cellar? What cellar? We don't have a cellar... Oh, you mean the new sand box! Here, let me get some shade too."

I'm not sure why, but I can never seem to follow plans exactly. I guess that's not entirely true. I CAN follow plans exactly, but I almost never do. Maybe it's some sort of passive rebellion or something, but I usually have to put my own spin on the things that I build. Sometimes it works out in my favor. Sometimes not. This build was a little of both.

I decided to only build one bench in our sand box. This cut down on a lot of supplies. By making it longer a single bench and making it longer, it covers about the same amount of square feet, just in a rectangle instead of a square. When pricing lumber, I noticed that 2x8's were cheaper than 1x8's. So I went with those instead. It can't hurt to beef up the sides a little, right? This required some easy calculations on the cut list. I also decided to use 1x6 fence planks instead of 1x4 whitewood or pine. The fence planks were cheap, and I figured they would look nice in the back yard. They are also naturally pest and rot resistant. They required extra sanding to take the rough off. However, this is one place that I'm thinking the modification didn't work in my favor. The fence planks are not as thick as the whitewood. This combined with the increased length makes the the top pieces feel pretty weak. I put a little support piece under the bench. I'm quite sure the bench would not have held up well without the support.

Because this is an outdoor piece, I dry fit everything, and then stained everything before assembling it, to make sure all of the edges were well protected.

Cost breakdown (not including canopy)
Fence planks $14
2x8x8 $11
hinges $9
handle $2
stain $10

My hubby built this from saushas washer/dryer pedestal plans. He modified it a bit because we needed the storage taller underneath for shoes and baskets. Our closet is right by the front door and it was always a mass of shoes in front of the washer and dryer that you couldn't shut the door! It works great. We have beautiful hardwood floors (that was my hubby's trade for 12 years) and didn't want to cover them up either:)

I made one of these for my dining room table and my family liked it so much I made 2 more. The last one I made from a live edge piece of black locust and made the base out of black limba. The second one my daughter wanted a little wider so I used a 1X10 instead of a 1X8. A lot of fun to make and everyone really likes them.

Plan was super easy to follow. Built a drawer type pull out so I could fit in odd sized trash cans. Made the pull-out part like an open sided drawer box, out of lightweight wood, and attached the door to it - used 75-lb euro drawer slides. Construction took a couple of afternoons, and finishing took a couple of afternoons. The finishing materials were all left over from other projects, and the plywood for the cabinet sides was left over from our kitchen island build. Topped with a leftover piece of countertop. The contractor who installed our new countertops said I did a good job on the cabinet build. I was very flattered! Ana, thank you for your wonderful plans!

We made this for our master bedroom. We had wood that was already primed so it made the project go faster. Also, the wood for the back panelling isn't entirely straight which I like because it allows slits of lights to flow through and looks a little more rustic. I used a soft blue paint for the color called abracadabra. I hand sanded in some areas to give it a worn look and then I placed a stain over the top in which I almost immediately wiped off because I wanted it to be very minimal.

Build Instructions:

http://www.instructables.com/id/Shed-Ramp/

Video:

https://youtu.be/WTqfV1HDstc

My garage was starting to get cramped so I decided I needed a shed for the lawn/garden equipment. I thought about building one but bailed and decided to purchase a 10’ x 14’ shed with 6’ wide doors from the nearby Amish community. To not be a total slacker, I decided I could at least build the foundation and ramp. I’ve never built a ramp so I did a little research online and found that there are an abundance of styles, both good and bad. Anyway, this is my attempt at ramp design. Hope someone finds it useful.

Christmas Stocking Stand by Julie Latham on Facebook.

I used the plans for the simple outdoor lounge chair and just made the arms wider, the cushions came from Target.............the dog loves it !

My daughter has been accumulating American Girl doll clothing and accessories since her birthday last summer (2013), and we were rapidly running out of room for all of it. Luckily, her Grandpa ("Pop") is a skilled carpenter and whipped up this awesome closet for her in a weekend (including the amount of time it took to pick out all the materials, paints, and paint everything/let it dry). She absolutely loves it and it is the perfect way to keep everything organized, while still looking great!