Community Brag Posts

Truss 4x4 Dinner Table

Submitted by cbos09 on Mon, 04/06/2015 - 08:15

4x4 Truss beam dinner table with matching benches.  Benches are modified to fit under table to save on space when not needed.  This table is large and in charge and demanded a large space to fit in.  Luckily my friend had plently of space in his home to fit this table! 

Estimated Cost
Table: $150
2 Benches: $100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rustoleum Weather Gray stain
Minwax Water-Based Polycrylic Protective Finish (2 coats)
Recommended Skill Level
Beginner

Comments

Reclaimed Wood Headboard, Queen sized

Submitted by Anonymous (not verified) on Thu, 07/13/2017 - 17:34

My boyfriend and I wanted a calm relaxing beach feel at our Florida vacation home, however with kids in college and two getting married, we were on a tight budget.  We found these plans on Ana White's website.  He made the headboard and bench and I distressed it to make it look weathered.  We used Minwax Dark Walnut as a base,  let it dry over night,  and lightly wiped it down in the morning.  We then used Rustoleum "Chalked" in White Linen and applied it with a large stencil brush we found at Michaels craftstore.  We applied it almost haphazardly,  purposely making it look rough.  The chalk paint dries quickly.  We then brushed on some clear Americana creme wax.  We are very happy with the end result,  it was our first project build, and we nailed it.  Thanks. Ana!!!

Estimated Cost
It cost about 100 dollars to build both the bench and headboard. We also spent about 40 dollars on the medium to finish the headboard.
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax: Dark Walnut
Rustoleum Chalked: White Linen
Americana Clear Creme Wax
(All the above purchased at Home Depot)
Recommended Skill Level
Beginner

Minnie Mouse Child’s Adirondack

Submitted by Anonymous (not verified) on Mon, 10/04/2021 - 15:34

Made this for my grand niece, who was obsessed with Minnie Mouse. When done, my friend said I needed to add a foot rest, so I did!

Built from Plan(s)

Comments

Ana White Admin

Mon, 10/04/2021 - 16:42

So incredibly adorable, thank you so much for sharing! Your friend was right, that footrest is the cherry on top!

Drawer bases turned banquette

I took Ana's open base and drawer plans, added a few inches to the height (so that the base trim on the storage units would clear the base trim on our walls), and put them together to create a banquette-style bench with tons of storage underneath. We use the drawers for our family board games and photo albums.

Estimated Cost
$100-$150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Sherwin-Williams Pro-Classic in semi-gloss followed by Minwax Polycrylic.
Recommended Skill Level
Beginner

Farmhouse Table

Submitted by monster on Sun, 05/19/2013 - 20:43

This was my first furniture building project. I made quite a few mistakes along the way, but I'm happy with how well it turned out. This project took me ages; I'm amazed that people can pull it off in a weekend! I made the table slightly lower and narrower than Ana's plan. It comfortably seats 6 people. I'm so grateful to Ana for her plans, and I also found the instructions at the tommy & ellie site very helpful.

Estimated Cost
$300
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Dark Walnut stain and fast-drying semi-gloss polyurethane
Recommended Skill Level
Beginner

Comments

My beautiful pedestal!

My best friend and I built these Easter weekend with very little husband intervention. I then painted and finished them and installed them with my husbands help. The main modification we made was to figure out the angle to cut the posts in order to adjust for the slope of my laundry room, which is a converted porch on a 1912 craftsman. It was not easy, but we jumped for joy when we tested it out and it was level! We decided to use plywood scraps on the side and back for more support and to keep laundry from falling behind the washer. I had the chair raiI trim from another project, so I used that along with a healthy dose of wood filler. I absolutely LOVE how it turned out...now I just need to find cuter baskets. 

Estimated Cost
I had most of the supplies on hand, so I would say less than $60.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Primed with white primer, followed by blue paint, then I sanded to antique it along with adding a few vanilla highlights. I applied the burlap letters with craft glue and highlighted them with paint, followed by two coats of satin poly spray. I applied the pad on top with craft spray glue.
Recommended Skill Level
Intermediate

Comments

Modern outdoor chairs

Amazingly easy to build!❤️❤️❤️ My new chairs. The table is made from the Ana White planter. We just used left over 2x6's and 2x4's to create a removable top. It makes a great table with Kentucky of storage.

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Behr deck plus Padre Brown
Recommended Skill Level
Beginner

Baby changing table

Submitted by Anonymous (not verified) on Mon, 10/04/2021 - 17:20

Built this changing table for my granddaughter. I used select pine. My daughter has not decided if she wants to stain it or paint it yet. I pocket hole screwed the joints. It is very solid.

Built from Plan(s)

Comments

My first building project ever. Thanks Ana!

Submitted by amberhibbs on Wed, 03/09/2011 - 19:01

I made this table using Ana's design for the Farmhouse Table and the original from Restoration Hardware. I put the stretcher supports back on the outside and added the extensions.

I also switched out the 2x6 top for 2x8s and attached them all from the bottom; I didn't want to deal with concealing screws on the table surface. The switch meant the boards on the sides are attached only on the innermost 3 inches. I drilled up through the 2x4 aprons and used 3 1/2 inch screws every six inches to make sure they were secure.

It's enormous and seats 12 if needed.

Estimated Cost
$160 using free recycled stain and a ton of screws
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I sanded it until I was pretty sure the risk of splinters was eliminated, but it was far from perfectly smooth. After pre-stain conditioner, it got a coat of Minwax Red Chestnut. The result was a little too red so my mom saved the day with a coat of Minwax Provincial and sealed it with wax. It's a tough finish and I'm not taking any special care of it. The goal is for it to look like it's really old, not pristine, so I make a point of not using place mats or protecting the surface.
Recommended Skill Level
Beginner

Emme Twin Bed, turned out better than the pottery barn one !!

Submitted by Binda B on Thu, 05/23/2013 - 10:25

This bed is made exactly the same as the plans. Pretty easy. Very sturdy, I did use the kreg jig to assemble, even to attach the sides to the headboard and footboard. I'm not able to use the box spring anymore, since it makes it too high.

Estimated Cost
$80.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
same as the shanty-2-chic bed, Kona rustoleum with a satin finish.
Recommended Skill Level
Starter Project

Modified Brina Bedside Table

I added a cabinet door and put some extra trim on to fancy it up a bit. I also used my router and an ogee bit on the top. The top and plywood sides are aspen and the rest is poplar. They were finished using General Finishes Georgian Cherry gel stain.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
General Finishes Georgian Cherry
Recommended Skill Level
Intermediate

Comments

Simple Square Outdoor Table

Submitted by hannant on Mon, 08/07/2017 - 15:10

Inspired by Finn's Dad's table, we decided to copy it since we wanted to build a table that would seat 8 comfortably. The most difficult part of this project was finding clear cedar for the top. It had to be ordered through our local lumber yard and we were not able to match boards. We built the frame out of treated pine and the 4 x 4 legs from average greade cedar found at Lowe's. We finished it with four coats of polyurethane. 

Built from Plan(s)
Estimated Cost
$300-$450
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Zak Polyruethane marine satin
Recommended Skill Level
Beginner

Rustic X Console

Submitted by srodge1 on Mon, 10/04/2021 - 19:47

Built this for some dear friends ... turned out so pretty.

Built from Plan(s)

Comments

Farmhouse Vanity

This was my first project working start to finish with my husband, and let's just say that I prefer to build without him! This was a lot of trial and error, but I think in the end it turned out really well. We splurged on the plywood top, the sheet alone was $60, but since we used it on this, 3 benches, and our kitchen island, it was well worth the splurge!

We made the vessel sinks from metal bowls snagged at Target for $17 each. We drilled a hole using a hole-saw bit, and popped in an $8 drain kit from Lowe's. The faucets were given to us by my father-in-law, who's the manager of a plumbing company. I sewed a curtain that I stapled on the inside to hide the plumbing beneath the sinks. I love how it all looks now!

Estimated Cost
$60 for vanity, $50 for sinks
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax stain in Dark Walnut followed by 3 coats poly
Recommended Skill Level
Starter Project

Children's Storage Chair

This was a birthday gift for a 1 year old. Yes it's painted like the tractor.

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Intermediate

Comments

ALPHABET BLOCKS INSPIRED KIDS STORAGE SEATING

This project allows your creativity to flow.  It's a woodworking and art DIY project.  These storage benches for children are inspired by my youth when I played with wooden alphabet blocks.  It's the perfect accompaniment for this Alphabet Blocks Inspired Chalkboard Play Table.

Estimated Cost
$15/a seat
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
latex paint and pecan stain
Recommended Skill Level
Beginner

Comments

Entertainment center

Submitted by baf013 on Sat, 08/19/2017 - 18:55

I did not build this from any plans. Just had someone tell me what size of entertainment center they wanted. 

Estimated Cost
200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax polyshade Black
Recommended Skill Level
Intermediate

Chicken Coop

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 05:45

My granddaughter decided to raise chickens so she asked me to build her a coop. I used a Ana White plan with a couple modifications and along with my son, wife, and granddaughter built this. She’s had hawks and raccoons try to get in, to no avail.

Comments

Barn Pallet Beam Ledge

I always have leftover pallet wood lying around. So I decided to whip of a beam ledge as a gift. I ended up wrapping it before I even got a final photo but it was finished in a dark gel stain. I think the next time I make one I will apply a simple Tung oil finish so all the wonderful character can remain.

Built from Plan(s)
Estimated Cost
FREE!
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Moderate Sanding
Recommended Skill Level
Beginner

Farm Harvest Table - OLD!

I did a shortened version of the Farm Table, I only had room for a six foot table. I wanted to give it an old-looking feel, so I beat it up a bit and stained it with an ebony stain, then a jacobean. I plan to paint the legs black.

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Ebony and Jacobean
Recommended Skill Level
Beginner

Vintage Bunk Bed

We built this bunk bed for our daughters (age 3 and 4) and they LOVE it!  We are so happy with it.

Built from Plan(s)
Estimated Cost
$600
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Advanced

Comments