Community Brag Posts

I followed the plans for the 4x4 Truss Beam Table and it turned it out great! I definitely recommend the Kreg Jig HD for the 4x4's. I used non HD Kreg screws for the table top.

It's much easier to build it upside down to ensure you get all your pocket holes underneath. Also, use duct tape to keep the 45 degree angle posts clamped as it's much easier when screwing together.

As a bonus for the family I built it for, I cut their name out with my scroll saw and added as a personal touch for the piece.

I made this window seat for my home office from your mudroom bench plan. Turned out fantastic. Loads of storage in these huge drawers. Loving it!!

Anna's (the one on the right) new activity table with rolling carts! Rolling drawers are made of 3/4" MDF with 2" casters underneath. The chalkboard frames (found here) were painted with satin finish pink paint, then two coats of glitter Mod Podge. I love how they turned out!!! We added a piece of 1/8" plexiglass to the top to protect it better. The flat top is made of MDF, sides and frame are made of pine and the legs are poplar. Two coats of primer, three coats of semi-gloss paint and three coats of poly. She is sooooo excited!!! Ana's estimate of $50-$100 on her website is fairly accurate depending on where you live, minus the plexiglass. So adding it all up... 3 - 2" x 2" x 8' stud/strips are $1.29 each at HD (total $3.87) 4 - 1" x 2" x 8' Radiata Pine boards are $4.82 at HD (total $19.28) 1 - 49" x 97" sheet 3/4" MDF was about $40 at HD (they rip cut it for me for free) 8 - 2" casters were about $2.50 each at HD (total $20) That's $83.15 plus tax and doesn't include all of the smaller extras like screws, glue, sandpaper, primer, paint and poly. I had most of those already... but it's items like that would easily push the total over $100. The little extras that I did were pricier poplar legs since I didn't like the look of 2x2 stud/strips and the custom sheet of plexiglass $35 at local plastics company. 2x2 studs/strips are fine, but after using them on my sawhorses and painting them, I wanted something more perfectly square (prettier?) for this table.

This closet system was designed and ordered using the Ana White Shelf Help configurator. I put it together using my Kreg pocket hole jig, Kreg shelf pin template, and Kreg screws. I’m 70 years old and I was able to do it all myself. My husband helped me move it into the closet after I assembled it. Very sturdy! I planned to paint it white. But, I really liked the light natural finish of the plywood, so I just put several coats of poly instead. I am VERY pleased with the finished product. I would never have attempted this if not for the Shelf Help configurator! Thanks.

I have actually made this island several times and modified the size each time. I really like this and it fits my kitchen well. Thank you for the inspiration

This was the first good-sized project I built by myself. I finished it more than 4 months ago and it still makes me smile every time I look at it. :-) A simple, functional and BEAUTIFUL shelf that will work anywhere and for anyone! I was so impatient for it to be finished I didn't put poly or any clear coat on it and I'm still in love!

Tools Used:
Jigsaw, Hammer & Sander.

FIRST Project! Made this for my brother who works out at home and uses his bed as bench when he lifts weights. tsktsk. It took me 2 days, on and off to finish this. :))

Thanks Ana for the plan. I learned a lot and I can't wait to try and build your other plans. :)

I used a few pocket holes and cut it down to 5 ft long(I have a smaller kitchen). The plans made it real easy to do so. The bench was also cut down.