Book shelf with reading nook

Submitted by Knathu121 on Fri, 01/05/2018 - 20:24

I made this book shelf with a reading nook for my daughters nursery. I found one you can buy online for $250 and decided I could make it for much less. I used 1 x12’s and the cushions were made by my mother and grandmother. All together it cost about $65 to make. 

Estimated Cost
$65.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Comments

Ana White

Sat, 01/06/2018 - 11:41

This is adorable!  I love the entire room!

We've had a couple of people ask for plans.  If there aren't any available, would you be willing to let us draw some plans up from your photos?  Thanks! Ana

Knathu121

Sun, 01/07/2018 - 09:11

I don’t have my cut list anymore but rough dimensions are as follows;

height - 23.5” 

width 44.5

depth- 12”

I tried accounting for the width of the wood in order to make each square on the bottom 10x10 and the 2 middle shelves to be 12 inches high and the bottom on the middle shelves to be 10” wide. I wanted to have at least 20” for the seat while also having 2 wide enough shelves at the top to be able to put things. Sorry but I don’t have the angles of the 2 side walls for the sitting area. I know that’s a pretty rough explanation but with the things I’ve seen you make I’m sure you can make do!

 

 

Knathu121

Sun, 01/07/2018 - 15:43

I don’t have my cut list anymore but rough dimensions are as follows;

 

Height - 23.5”

width 43.75”

Depth - 12”

 

I tried making dimensions to account for each box on the lower level to be 10x10 and the boxes in the middle to be 12” high and 10 inches wide. I wanted the seat to be at least 20” but I miss calculated the angle cut length and my seat is less then 20”. I can’t remeber the angle I used for the walls (sorry!) but I wanted to make sure that the top shelf was wide enough to put stuff on it. I know this is a rough explanation but based on the incredible stuff you make I’m sure you can work it out and make some pretty awesome plans!