I was looking for a storage bench for our playroom that had a flip top lid, but wasn't going to be a bottomless pit for tiny pieces of toys...been there done that! Then I saw just what I was looking for! The top flips up, but the bottom is storage shelves - perfect for baskets or shoes.
Step by step woodworking plans with diagrams, shopping and cut lists.
I plan to top mine with a long seat cushion and some toss pillows.
- 1- 2x2, 6ft
- 1- 1x3, 8ft
- 1- 4x8 plywood - this plan was designed for plywood that actually measures 3/4in
- hinges for lid
2 - 3/4" plywood @- 13.5" x 16"
4 - 2x2 @ 18"
4 - 1x3 @ 13.5"
1 - 3/4" plywood @ 41.5" x 16"
Bottom and Shelf
2 - 3/4" plywood @ 41.5" x 16.25"
1 - 3/4" plywood @ 41 1/2 x 7 3/4
Divider (you could do 1 or 2)
1 - 3/4" plywood @ 16.25" x 6.75"
1 -1x3 @ 45" (measure to fit)
1 - 3/4" plywood @ 45" x 14.75" (you might want to cut this last to measure for perfect fit)
Sorry I planned this for 3/4 in pieces, but i realized later that if you are using plywood its going to be slightly off, but it should only be off for the lid.
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
We apologize if there was an error in this plan. Please help us out and report any errors here.