1. Home
  2. Plan Catalog

Shanty Sideboard

The free plans on this website are made possible with advertising and affiliate links.  Thank you for helping us keep plans free.

 

build your own dining room sideboard farmhouse style
|save this plan
Difficulty
Advanced
| Print this plan

Build your own farmhouse style sideboard with doors!  We love it paired with our matching hutch plans.

Our free step by step plans include detailed diagrams, shopping and cut list, and lots of reader submitted photos.  Build yours today and save hundreds off retail.

This beautiful sideboard features four large doors and lots of cupboard space.  We've added moulding detail to fancy it up.

build your own dining room cabinet

You can stain or paint any color of your choice.

This plan was designed and built in collaboration with Whitney from Shanty2Chic:

I have drooled over RH's sideboards for years, but never dreamed of being able to own my own. I about choke every time I see those $3000 price tags! I wanted something grand, and with a little bit of farmhouse charm. Ana delivered! This was a very large piece to build, but the cuts were simple without any weird angles. I finished both pieces in a weekend and could not be more pleased. The best part... I spent less than one tenth the cost of RH's. This may be one I pass down to one of my kiddos one day ;-)

For lots more pictures, and more details straight from Whitney on building this amazing sideboard, you can read her post here.  

Dimensions
sideboard plans
Dimensions shown above.

Preparation

Shopping List
  • 1 – 10’ stick moulding for top
  • 1 – 10’ stick 5 1/4” base moulding
  • 1 – 4’ stick 2 1/4” base moulding
  • 3 – 1x3 @ 8 feet long
  • 1 – 1x4 @ 8 feet long
  • 1 – 1x4 @ 6 feet long Additional
  • 1x3s for doors if desired
  • 1 and a 1/2” sheets of 3/4” plywood, ripped into strips 15 3/4” wide (referred to as 1x16s in this plan)
  • 1 – 1/4” plywood full sheet for the back
  • 4 sets hinges
  • 4 knobs or handles

 

Common Materials
1 1/4 inch finish nails
1-1/4" Pocket Hole Screws
Elmer's Wood Glue
Cut List
  • 4 – 1x3 @ 10 3/4”
  • 4 – 1x3 @ 35 1/4”
  • 2 – 1x16 @ 35 1/4”
  • 1 – 1x16 @ 73 1/2”
  • 1 – 1x16 @ 30”
  • 1 – 1x16 @ 70 1/2”
  • 2 – 1x4 @ 32 1/2”
  • 1 – 1x4 @ 73 1/2”
  • 1 – 1x3 @ 26 1/4”
  • 1 – 1x3 @ 66 1/2”

CUT DOORS IN PLANS

Cutting Instructions

It is crucial that our plywood be ripped consistently the same width. If you have your hardware store rip your plywood, ask to have the saw set horizontally, so the plywood is pushed through the saw without readjusting the saw.

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Circular Saw
Miter Saw
Brad Nailer
Power Sander
Level
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

Start by adding trim to ends first. Also add 2 1/4" base moulding to insides of end outsides (see ends in next diagram).

TIP: Drill 3/4" PHs facing upward on inside of plywood ends before attaching trim for attaching top in next step.

Step 2

Now it's time to join it all together! Attach the plywood to the sides and add center partition.

Step 3

Build your front face frame first and then attach to front of sideboard.

Step 4

Cut moulding to fit and attach with finish nails and glue.

Step 5

Step 6

Build doors to fit openings - leaving approximately 1/8" gap around all sides, including bottom. Attach with either butt hinges that are installed in the gap between door and face frame, or use euro style full insets - you may need to add blocking for these to work.

Step 7

Shelves can be added at any height, either fixed or with shelf pins.

Step 8

Attach back with 1 1/4" finish nails and glue.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Project Type
Buffet, Sideboard and Credenza Plans
Room
dining room
Storage Solutions
Style
Farmhouse Furniture

Comments

Herman (not verified)

Wed, 09/19/2012 - 20:55

Did you use Sketchup for the plans? If so, will you make that available for download?

Anonymous Coward (not verified)

Thu, 09/20/2012 - 04:33

TIP: "Shelves can be added at any height, either fixed or with shelf pins."

If you want to use shelf pins, it's far easier if you do the marking and drilling before you build the base, marking down from the tops of the side and center pieces. Make a template for the holes (a strip of pegboard works) and use a drill press or drill block to get them straight and perfectly spaced.

John Scruggs (not verified)

Thu, 09/20/2012 - 09:38

Thanks for the projects on here learning to do wood working and boy you and my wife are keeping me going with a lot of the projects you post on here I like doing them plus it keeps me in good with my wife if I can stay up with them so keep me going Love it.

buffy0506

Fri, 09/21/2012 - 07:50

I'm hoping to build some built-ins on a fireplace wall that extend into our dining room, and putting a hutch in the middle was part of the plan. This will fit perfectly, and the base (altered to a different height) will be perfect for the rest! I also need to build doors for another cabinet, and again this is exactly the style I was looking for but was too overwhelmed and didn't know where to start (so the cabinet has been door-less for going on 7 years!). Thanks so much!!!

Jocelynzl (not verified)

Fri, 09/21/2012 - 16:45

I've been looking for plans like this forever. Thank you so much for sharing!

Derek (not verified)

Sat, 09/29/2012 - 16:23

Awesome plan and I am currently building the sideboard. When will the plans for the hutch be up on the site. My wife wants me to add that as soon as there are plans to build off of! Thanks for all the wonderful plans and excellent instructions!!

Derek (not verified)

Sat, 09/29/2012 - 16:23

Awesome plan and I am currently building the sideboard. When will the plans for the hutch be up on the site. My wife wants me to add that as soon as there are plans to build off of! Thanks for all the wonderful plans and excellent instructions!!

Carrie McCarthy (not verified)

Fri, 11/09/2012 - 08:00

Hi Ana,
Is the shopping list above for just the lower sideboard or does it include the hutch? I'm going to make just the sideboard this weekend and I wanted to make sure I was going to buy the right thing.
Thanks
Carrie

Nicholle (not verified)

Sun, 11/11/2012 - 16:02

I am wondering if I send you a photo and info about an area that I am trying to renovate if I could get your help.

Thanks
Nicholle

Dawnmari (not verified)

Wed, 01/16/2013 - 17:50

Hi, Love the plan, just wanted extra room like for a buffet table too. Can you make the bottom larger so that there is like a shelf and can you help with the directions for that. Just curious, love it .... wanted to put it on a glass porch, but needed side table room as well. Thanks. :)

solarvirga

Sun, 06/30/2013 - 08:16

I absolutely love these plans. I'm using them to build a foyer table for a *gasp* snake cage. White-washed the whole thing and then glued some hard-wood floor to the top. I'll submit some pictures soon!

Jtheonewhocould

Sat, 09/20/2014 - 01:13

 

Hi Anna,

This piece is beautiful. The design is very close to what I have in mind, however I would like to modify it. How could I add in a sliding glass doors to this plan? Or perhaps just glass doors period. Also I would like the shelving to be removable. How could I go about doing that?Thank you for taking the time to answer my query. I appreciate it very much.

DIYER_MD

Sun, 02/15/2015 - 14:58

You can take a look at the one I built by going here:

http://ana-white.com/2014/01/shanty-sideboard-and-hutch-first-build

To modify the plan, you can build the sideboard without the doors. Then measure the opening for each door and add 1 inch to both the length and width of the measurements. That would give you a 1/2 overlay on each side. (you can adjust this as you like to get the look you want.). I got the hinges from Lowes. The hinges I used mount to the edge of the frame to make the doors overlay. To mount these type of hinges will require that you drill the mounting hole using a Forstner Bit which you can also get from Lowes. The hinges also allow minor left/right and up/down adjustments after they are mounted.

Hope th\is atleast gets you going in the direction you want to go.

Terry

justinhase

Fri, 08/14/2015 - 16:41

Ana, Is there a pdf of the second half of this plan? I may be missing it but I can't seem to find the instructions for the top half of this piece. Is there a link to the instructions for the other part of this project somewhere else on your site?

Jline

Thu, 12/17/2015 - 21:01

When it mentions in the shopping list 10' molding for top what is the type of molding, any particular width or something like crown molding used in houses?  Thank you. 

bornlax55

Mon, 05/17/2021 - 12:42

Is there a separate link or pdf for the plans? Or do the plans only consist of the pics/text that is shown after I click on the project? Some of the text makes it read as though there are significantly more detailed plans available rather than the 8 steps listed above. thx