1. Home
  2. Plan Catalog

Triple Pedestal Farmhouse Table

The free plans on this website are made possible with advertising and affiliate links.  Thank you for helping us keep plans free.

 

triple pedestal farmhouse table
|save this plan
Difficulty
Intermediate
| Print this plan

Free easy DIY plans to build a triple pedestal farmhouse table for $125. We love the open sides design for maximum leg room, and the beautiful pedestals.  It's all made from off the shelf lumber.  Step by step plans from Ana-white.com

Build the matching bench with our free triple pedestal farmhouse table bench plans.

triple pedestal farmhouse table medium wood stain
triple pedestal farmhouse table medium wood stain
triple pedestal farmhouse table medium wood stain
triple pedestal farmhouse table medium wood stain
triple pedestal farmhouse table medium wood stain

I collaborated with my DIY friend Ashley from Shanty2Chic for this plan.

We changed up the top a little to really show off those beautiful solid wood boards!

And got a little fancy with the legs to really make this table unique and full of character!

 

Here's from Ashley:

There is no way I could have a $1,000 (plus shipping and tax) dining table in our home with 2 boys and a toddlerWinking smile So, as always, I enlisted the help of our very sweet and talented friend, Ana White! She nailed it and after her awesome plans and my elbow grease, I now have a ridiculously gorgeous, expensive-looking, grand dining table and it only cost me $125!  Who would have thought that 2x4's and pine boards could be so fancy!  

 

Easy Modifications

It's easy to modify these plans!

farmhouse table modified double base

We love a smaller size with two bases.

We also love the angled 2x4 supports (instead of the curved pieces).  This would be much easier to build but looks just as nice.

 

Dimensions
triple pedestal farmhouse table plans
Dimensions shown above

Preparation

Shopping List
  • 1 - 2x8 @ 8 feet long
  • 3 - 2x4 @ 8 feet long
  • 2 - 2x4 @ 10 feet long
  • 1 - 2x6 @ 8 feet long
  • 3 - 2x6 @ 10 feet long
  • 1 - 1x3 @ 8 feet long (more if not using pocket holes - see plan notes)
  • 6 - 1x6 @ 8 feet long
  • 2 - 1x2 @ 10 feet long*
  • 1 - 1x2 @ 8 feet long
  • 2 - 2x2 @ 10 feet long*
  • 1 - 2x2 @ 8 feet long
  • 2 1/2” and 3” self tapping wood screws
  • 1 1/4” pocket hole screws
  • Wood glue

*decorative does not have to a solid wood board all the way down, you can piece shorter boards together

Cut List

LEGS

  • 6 - 2x4 @ 21 3/4”
  • 6 - 2x4 @ 8 1/8”
  • 6 - 2x6 @ 34 1/4” (both ends beveled at 45 degrees, long point to long point, ends NOT parallel)
  • 12 - 2x8 @ 7 1/4” (cut out in arch shape)
  • 3 - 2x6 @ 36” (both ends beveled at 30 degrees off square, long point to long point, ends NOT parallel)
  • 3 - 2x6 @ 36 1/2”
  • 6 - 1x3 @ 5 1/2” (OR 1x6 @ 2 1/2”)
  • 1 - 2x6 @ 90 1/2”

 

TABLETOP

  • 12 - 1x6 @ 47 3/4”
  • 2 - 2x4 @ 106”
  • 3 - 2x4 @ 33”
  • 2 - 1x2 @ 102 1/2”
  • 2 - 1x2 @ 39 1/2”
  • 2 - 2x2 @ 103”
  • 2 - 2x2 @ 40”
Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Kreg Jig
Drill
Circular Saw
Jigsaw
Miter Saw
Brad Nailer
Power Sander
Level
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

You'll need to make three of these. If you have a nailer, that will be the best way to go. Keep outside edges flush and use glue. TIP: Make sure your stretcher board fits in the middle opening.

Step 2

Next add the top and bottom.

Step 3

Now add the decorative pieces. You'll cut these with a jigsaw and sand smooth first before attaching.

Step 4

And then the base board.

Step 5

Attach board on top of leg pedestals with screws and glue.

Step 6

Adding feet will make your table sit on the six little feet - very handy if you have uneven floors. Then you can just shim the one foot not cooperating.

Step 7

Now it gets fun! Put the stretcher in place.

Step 8

And now let's move on to the table top. I highly recommend a Kreg Jig here.

Step 9

And the decorative aprons. Don't forget the glue here.

Step 10

Add the finishing touches here. Use glue and screws or nails. Predrill to avoid wood splitting.

Step 11

Now we can add the base!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Project Type
Table Plans
Room
dining room
Style
Farmhouse Furniture

Comments

jaimej

Fri, 11/30/2012 - 13:37

Wow - I love the feel of the original farmhouse table, but didn't like the legs as they seemed to be in the way - this is the perfect fix and so beautiful. I don't even have a first build under my belt yet, but I will definitely put this down on the list as one to tackle after a little experience!

dmcarwin

Fri, 11/30/2012 - 13:53

This is so beautiful! I really love it! Great job Ashley, and Ana you are truly inspired and talented, and I know you hear that a lot, but it is so true. As I have said before, I LOVE to build, because of your awesome plans! Thanks again!

jezsika0910 (not verified)

Fri, 11/30/2012 - 18:37

Wow I love this table!!!!!!!! Really wondering how it was only 125.00???

bubbajoj

Wed, 12/27/2017 - 20:08

I bought the lumber and hardware for this table and the benches today at a cost of $186. All I need to purchase yet is the stain and poly. 

Wona (not verified)

Sat, 12/01/2012 - 04:04

I'm wondering if the wood is just regular pine or if it is something a little more expensive. I think most of our 2x4s here are of pine.

Jessica M (not verified)

Sat, 12/01/2012 - 06:04

I Love it! would it be possible to make it shorter? Only two legs instead of three? I would love to make it for my kitchen table and 106" is too long.

Dorn (not verified)

Sat, 12/01/2012 - 07:12

I would love to find some similar design chairs to match this table. Do you have or know of any plans for chairs.

kristen

Sat, 12/01/2012 - 07:15

I love this plan also!! And who can beat the price tag??!! I'm seriously thinking about building this one (I've considered building almost all of Ana's plans when they come out, lol!). I would need to shorten it AND would want seating on the ends. After looking at the plans, I don't think either one would affect the structural integrity of the table for the people who were questioning that. Two legs will support this table just fine--especially with it shortened. And since the legs fully support the table top across its width, it shouldn't matter if you move them in a bit for seating on the end.

Stacye (not verified)

Sat, 12/01/2012 - 11:28

I have been looking at farmhouse tables plans because I am on a tight budget and this is the one! Absolutley exquisite. I was wondering about chairs at the end because I want to reupholster some wingback chairs to put at the ends. Will it mess up the stability or layout of the table to move the end legs in to allow for chairs? Again, I am in awe and this is definitely the table of my dreams.

Katie Tice (not verified)

Sat, 12/01/2012 - 15:42

I also am wondering about making the table shorter to fit my kitchen. We would need a six-foot table instead of nine. And also a bench on one side, if you have plans for that? Thanks!

momofour09

Sat, 12/01/2012 - 18:54

I LOVE this table! I finally talked my husband into building some things for the house and he agreed to tackle our first project together. Since our kids destroyed our table, that's the first on our list. I'm just wondering which tools are absolutely necessary and which are just for convenience/ease. I'm on a budget right now :/ but I MUST do this, it's fantastic and would fit right into my plans :)

risawest (not verified)

Fri, 12/07/2012 - 05:56

you could probably rent the tools you need... or make your cuts at a friends house that has tools... this is what we'll do

momofour09

Tue, 12/11/2012 - 09:11

That doesn't sound like a bad idea. It never really crosses my mind, but it's definitely an option. Thanks!

Alberto (not verified)

Sun, 12/02/2012 - 14:00

I really hope that bench plans for the farmhouse table are being created. This table is awesome!

risawest (not verified)

Fri, 12/07/2012 - 05:56

i'm also hoping there is a bench in the future and then I'll add some chairs to the other side... also will be making it shorter and bringing in the legs for seating on the ends.

i've been asking/begging my husband to build us a table as my christmas present... and just showed him this one and he likes it better than the another one that we were going to build. so excited!!! maybe we'll get this done early in the new year ;)

Sonny (not verified)

Tue, 12/11/2012 - 17:06

Great job on the table. How exactly did you cut the ornamental arc's that you used? Any advice would be appreciated.

Amy B (not verified)

Wed, 01/09/2013 - 17:47

I bought lumber for this table today, and I am so excited! 12 weeks until the baby comes, so we'll see how much I can get built with the bump in my way :)

Now I'm looking at the cut list again and wondering how in the world I'm supposed to get:
3 - 2x6 @ 36 1/2”,
3 - 2x6 @ 36” (both ends beveled at 30 degrees off square, long point to long point, ends NOT parallel)
AND
6 - 2x6 @ 34 1/4” (both ends beveled at 45 degrees, long point to long point, ends NOT parallel)
out of 3 - 2x6 @ 10 ft boards. Am I missing something? That looks like it would take 4 of the 2x6x10 boards. The other 2x6 board in the shopping list seems to be just long enough for the stringer and nothing else.

Samantha I (not verified)

Sun, 01/20/2013 - 06:52

Is there any way to adjust the plans to add extensions to the ends?

loniwolfe

Tue, 01/29/2013 - 07:51

I love this table and bench! I was wondering, though, could there be chairs to match coming? :)
I love the look of a long table with a bench on one side and chairs on the other and at the heads. Also, chairs are easier for grandparents and attaching highchairs too :)
Thank you so much for all your hard work and thank you to everyone else who helps Ana come up with/build all these wonderful plans!

cabrlamo

Fri, 05/31/2013 - 10:50

I love this pedestal table even more than the farm house table. I get an error when trying to connect to the pdf. Can you check the link? We will be moving to a new house in about a month and would love to make this our newest piece of furniture!

AzAdventurer

Wed, 08/28/2013 - 13:13

Hi everyone,
I'm in the planning stages of my project. I was wondering how your tabletops are holding up?
I'm thinking of using hardwood for the tabletop, and modifying some of the dimensions to better fit my situation.
Any comments and suggestions would be appreciated.

deborabilal

Fri, 04/18/2014 - 00:40

Triple Pedestal Farmhouse Table its looking very hard and good assets for home. I thing its also provide a good looking to our home.... we want to use Table which is take very less space to our home, and this is one of these...

LitzaKelMomma

Fri, 01/31/2014 - 16:50

We are currently looking at buying a home and this will be my first project once we get settled! I have always wanted a table I can entertain large groups with, that is still stylish and I have found it here. Thanks for posting! I was wondering though, I want to add a single person bench to each end so it will fit 12 people, do you have any tips on making that happen? Obviously I would like them to match the table and the long benches. Thanks. :)

francesca1

Sun, 04/06/2014 - 10:24

Hi,
I'm having trouble downloading the PDF version. Is it possible to send me a new link?
Thanks!!!

francesca1

Sun, 04/06/2014 - 10:24

Hi,
I'm having trouble downloading the PDF version. Is it possible to send me a new link?
Thanks!!!

radosevicha

Sun, 09/14/2014 - 13:34

I am getting so frustrated, because I want to see the finished product, but cant figure out how to attach the 1x6s to the frame! Can anyone help? The pocket holes are too high up on the frame to attach to the low 1x6s. I didn't want to have to buy more wood to add the extra boards, but I don't know how else to attach them like the plan. Please help!

cloyd1980

Tue, 05/19/2015 - 13:49

This table is amazing, but I am concerned about wood movement in the table top (expansion/contraction overtime). This design doesn't seem to allow for that to happen and I worried it will split. Any ideas?

ScottBuilds

Mon, 05/16/2016 - 16:25

I've got same concerns. I'm about to attempt to build something inspired by this. I love the simplicity of the trestle legs; no mortise / tenon issues, etc. Though I'm going to use decorative bolts to attach the stretcher so I can dis-assemble easily to get it into my house in pieces.

For the top, (using 5/4 - that is 1 1/4" red oak), I'm thinking of joining with either dowel or beadlock tool with glue of course, then using breadboards to try to control for movement. That will be a pain, but I've seen some best practice methods for doing this by using mortise and tenon for the ends where you only dowel pin and glue the center tenon. The others get pinned using a technique called drawbored. I've not done this before and I'm not great with mortise / tenon, so going to practice on cheap wood first.

If you do some searches for "drawbored mortise tenon" and "breadboard mortise tenon" you'll find videos and blogs, etc. Looks like a real hassle, but I don't want stuff splitting apart, especially because I'm going to try to use  expansion slides in teh center; and tose have to e exactly parallel.

jiles95

Tue, 04/05/2016 - 14:10

I could use some help with a more detailed plan of the table top.  This will be my first table project.  Not understanding the 1X's fitting with the 2X's.  Can anyone help????

PEP12483

Wed, 10/12/2016 - 19:38

I combined the versions of the table I have read in the comments and built it out of oak.  I turned out great after a rub-on poly finish and a good quality wax.  I built it for my wife's Christmas present in 2014.  Almost two years old and holding up great! 

Nickascott

Wed, 11/02/2016 - 16:09

This is a beautiful table and i cant wait to finish making it. That being said.....the shopping list for this plan is wrong. Im working on the legs right now and ive noticed that your shopping list is short a 2x6. After doing the math your shopping list provides about 456in of 2x6 but your cut list requires about 515in of 2x6. This is something you definitely want to update.

cmanmgm007

Mon, 07/31/2017 - 08:04

I was wondering if this base would hold the weight of a concrete top if I added 2x4s between the top of the legs

cmanmgm007

Wed, 03/21/2018 - 04:50

I am working on this table for my diningroom, but i am using either, Maple, or Oak Plywood for the top, which would work better since i am using stock lumber for the legs (basic pine), the stain will be speical walnut from Minwax. any help would be great since i have a foster home and so many kiddos.

The Toxophilite

Mon, 12/14/2020 - 15:33

Am I misunderstanding the instructions? It appears to me that the shopping list calls for 38ft of 2x6's (3@10ft and 1@ 8ft) but the cut list calls for 47ft of 2x6's. Seems like the shopping list should say 4 - 2x6's @ 10ft not 3.