My First Build: Console Table from "The Handbuilt Home"

Submitted by timgerdes on Mon, 03/11/2013 - 12:56

Not only was this my first furniture project from an Ana White plan, it was my first ever furniture project. I discovered this website and Ana's site through Pinterest and was inspired to build a table for my wife's craft room.

Leafing through "The Handbuilt Home," I found plans for a modern craft table, but decided I'd better get my feet wet first with a "smaller" project. Our front hall console table was a cheap, particle board piece from Target which seemed like the perfect candidate for replacement.

In retrospect, with drawer slides and hardware to contend with the craft table may in fact be an easier project than the console, but I found the plans straightforward and easy to read. Expecting to be intimidated by my own lack of experience, as the table came together I was, instead, continually inspired by my ability to actually build beautiful furniture for my home.

The most challenging part of building the console table was finding lumber, particularly straight lumber. Here in New Jersey, the local Home Depot and Lowes stores did not have a large selection of wood, virtually nothing beyond pine and most of that was visibly warped.

I eventually found boards that were relatively straight, though not perfect. As a result, getting the table perfectly square was an impossible task. For future builds I have already discovered some local lumber suppliers that offer a broader quality of materials than the big box stores.

The other part of this project that was really challenging was applying spray-on polycrylic. I never got a protective coat I was particularly happy with and decided to stop fussing because I feel like I was making things worse trying to correct my application mistakes.

In a few weeks I plan to add a layer of wax, which I hope will give the table a finish a more satisfying finish.

All things considered, especially as this was my first furniture project of any kind, I look at the beautiful console that now graces my front entry, dumbfounded that it's something I built from a small pile of wood. Many thanks to Ana White and her website and book for the inspiration!

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
The table top was finished in Minwax dark walnut stain and Minwax spray-on polyurethane in satin finish. The base was finished with a coat of the Minwax dark walnut stain, painted with General Finishes milk paint in Tuscan Red, hand sanded for a distressed look, treated with General Finishes glaze effects in Van Dyke Brown and a Minwax spray-on Polycrylic in satin finish.
Recommended Skill Level
Beginner

Comments

troy h

Mon, 03/11/2013 - 19:21

Great job, inset drawers can be a huge challenge. Love the finish.

Jibby

Fri, 05/10/2013 - 10:52

Hi!

Amazing job! Would you please direct me to where you found these plans. I've searched all throughout this website and can't seem to locate them...

Thanks :)