Adapted the original Queen plans to a King with a bed height of 27". Thanks for the original plans. Here are the adapted cuts to match the labeled photo:
Squared2 Headboard – King Size Cutlist for bed height of 27”
A - 2” x 2” x 76 ½” x2
B - 2” x 2” x 61 ½” x2
C - 2” x 4” x 76 ½” x1
D - 2” x 2” x 18 ½” x2
E - 2” x 4” x 18 ½” x1
F - 1” x 2” x 11 1/16” x4
G - 1” x 2” x 19 ½” x4
H - 1” x 2” x 12 ¼” x12
I - 1” x 2” x 5 ½” x6
J - 1” x 2” x 5 7/8” x12
K - 1” x 2” x 5 1/8” x18 K* - (May need to be trimmed to 5”)
Lumber needed
2” x 2” x 8’ x4
2” x 4” x 8’ x1
1” x 2” x 8’ x5
1” x 2” board cuts
|
19 ½” 19 ½” 19 ½” 19 ½” 5 1/8” 5 ½” 5 ½” |
11 1/16” 11 1/16” 11 1/16” 11 1/16” 12 ¼” 12 ¼” 12 ¼” 12 ¼” |
12 ¼” 12 ¼” 12 ¼” 12 ¼” 5 1/8” 5 1/8” 5 7/8” 5 7/8” 5 7/8” 5 7/8” 5 7/8” 5 7/8” |
12 ¼” 12 ¼” 12 ¼” 12 ¼” 5 1/8” 5 1/8” 5 7/8” 5 7/8” 5 7/8” 5 7/8” 5 7/8” 5 7/8” |
5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 1/8” 5 ½” 5 ½” 5 ½” 5 ½” |
Comments
yurra-bazain
Sat, 08/17/2013 - 16:19
Math-tastic :)
Phew, this pattern requires a lot of math, doesn't it? You did an excellent job of customizing the headboard to the size you need!
I'm working (today) on getting measurements right for a Squared2 Dining Table, so seeing your finished product is helpful. =D Thank you!