![](/sites/default/files/hutch-for-drawer-bench-1.jpg)
Hutch to match the cube collection drawer bench.
Collections
Yesterday, it was the drawer bench plans. Today? The matching hutch.
Dimensions
![](/sites/default/files/images/hutch-for-drawer-bench-2.jpg)
Dimensions shown above. It is sized to fit the bench perfectly. And books. And storage cubes.
Preparation
Shopping List
2 – 8′ 1x12s or 1 – 14′ 1×12
3 – 8′ 1×2 Boards
1/4″ Plywood
2″ Screws or 1 1/4″ pocket hole screws
2″ finish nails
Common Materials
Cut List
2 – 1×12 @ 38″ (Sides)
3 – 1×12 @ 27″ (Shelves)
4 – 1×2 @ 38″ (Side Trim)
2 – 1×2 @ 25 1/2″ (Top Trim)
1 – 1/4″ Plywood @ 38″ x 28 1/2″ (Back)
Instructions
Step 1
Step 2
Step 3
Now the top trim. Same thing, 2″ nails and glue. If you are using a Kreg Jig™, build the face frame first, then nail on.
Project Type
Room
Comments
Julie K (not verified)
Tue, 09/28/2010 - 10:37
I am so so excited about
I am so so excited about building this! We are just about to start my son's playroom, so what great timing. I will send photos once I complete it. Thanks again. :0)
LH (not verified)
Tue, 09/28/2010 - 13:47
Thanks for doing these! I
Thanks for doing these! I love this collection. Is there any chance that you'll be doing the 8 cube bookshelf?
Ana White (not verified)
Tue, 09/28/2010 - 14:06
Ooooh, I really like that
Ooooh, I really like that one! I would love to, time permitting. In the meantime, you could just build a wider tower, with dividers down the center. Ana
cramsmith
Tue, 05/06/2014 - 13:36
Securing the hutch to the drawer?
Just wondering if you found it necessary to secure the hutch to the cubby drawer? I am wanting to build this just slightly wider to accommodate some nice wooden drawers I found out on the curb.
Just wondering how you would secure it with out the hardware being overly exposed or in the way?