build two nightstands from 1 sheet of plywood! As seen on HGTV Saving Alaska with Ana White
Preparation
For TWO Nightstands
1 - sheet of 3/4" thick plywood ripped into strips 15-3/4" wide x 8 feet long
2 - 1x2 @ 6 feet long
1 - sheet of 1/4" plywood or other hardboard for backs and drawer bottoms
2 - 1x6 @ 8 feet long (for building drawers)
1 - 1x8 @ 5 feet long (drawer faces)
1-1/4" pocket hole screws for assembling carcass and drawers
3/4" finish nails or brads for attaching back and drawer bottom
1-1/4" finish nails or brads for attaching trim/drawer face
2 - set of drawer slides (recommend euro style drawer slide, 14" length)
2 knobs or handles
Edge banding is recommend for stained finish
12 feet of base moulding (4-1/4")
12 feet of cove moulding for the top edge
For TWO nightstands
2 - 3/4" plywood @ 15-3/4" x 30" (tops)
4 - 3/4" plywood @ 15-3/4" x 29-1/4" (sides)
4 - 3/4" plywood @ 15-3/4" x 28-1/2" (shelves)
4 - 1x2 @ 28-1/2" (bottom shelf support)
2 - 1/4" plywood @ 30" x 30"
DRAWERS - Adjust to fit your openings and drawer slides, measurements shown are for 1/2" clearance (1" overall clearance) drawers slides)
4 - 1x6 @ 14"
4 - 1x6 @ 26"
2 - 1/4" plywood @ 27-1/2" x 14" (drawer bottoms)
2 - 1x8 @ 28-1/4" (drawer face)
Cut moulding to fit
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
Instructions
Step 1
Step 2
Step 6
Step 7
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Comments
freefromburdens
Wed, 07/02/2014 - 15:02
Great nightstands. Sorry I
Great nightstands. Sorry I missed the shows. I'm so glad I have a chance to see it next time around. I checked my stations and it will air July 13th at 5pm on the DIY channel.
spiceylg
Wed, 07/02/2014 - 19:32
Cool!
I am so excited for you with this new journey you are on and much deserved, I must say. Didn't catch them this time around and sure hope I am able to next time. Nice night stands, too!
JoanneS
Thu, 07/03/2014 - 17:28
Awesome build!
Great nightstands! The plans are awesome and the finished build is beautiful. Love the finish too!
NoëlD
Mon, 07/07/2014 - 23:31
Showtime
Episode 1 will be showing on DIY Sunday the 13th at 2:00 PM on Comcast.
Look forward to watching it.
DSalvagni
Tue, 07/08/2014 - 09:53
Bed to go along with HGTV Nightstand
Does anyone know where i can find the plans for the bed thats pictured with the nightstand?
DSalvagni
Tue, 07/08/2014 - 09:53
Bed to go along with HGTV Nightstand
Does anyone know where i can find the plans for the bed thats pictured with the nightstand?
Risewithin
Thu, 10/30/2014 - 10:38
Not enough wood
Maybe im missing someone here but I went out and bought a sheet to make these not really calculating but putting my full trust these plans were right. After stripping down to 15 3/4" x 96" like the plans say i was able to get everything but 1 shelf. I get 3 rows of 15 3/4" on a 4x8 sheet which gives me a total of 288" where as in the cut list you would need more than that to actually complete these stands. Like I said, maybe I missed something but im missing a whole shelf so now I need to buy a gaga lf sheet or Soo. I don't know how everyone in these comments got the full stands out of one sheet.