Free plans for outdoor sawhorse table from Ana-White.com. Build using 2x4s and 2x6s!
9 - 2x6 @ 8 feet long
7 - 2x4 @ 8 feet long
*to frame the outside of the top, grab 3 more 2x4s
8 - 2x6 @ 27 3/8" (long point to short point, both ends cut at 10 degrees BEVEL)
3 - 2x4 @ 39 1/2" ( long point to long point, both ends cut NOT parallel at 45 degree BEVEL)
4 - 2x6 @ 7 7/8" (long point to long point both ends cut NOT parallel at 10 degrees off square)
2 - 2x6 @ 26"
4 - 2x6 @ 88"
5 - 2x4 @ 88"
cross supports 34" long - both ends beveled - one at 40 and one at 50 (you may be able to get away with both at 45 to make things easier)
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.