First project! Modern Farm Table using a mix of the original and the updated pocket hole plans. Stained with vintage gray/brown on pine. Used Minwax® Fast-Drying Polyurethane in satin to finish. Table - 33" X 69"
Built from Plan(s)
Estimated Cost
$150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Vintage Gray/Brown
-Minwax® Pre-Stain Wood Conditioner
-Minwax® Weathered Oak
-Minwax® Special Walnut
-Minwax® Fast-Drying Polyurethane
One* coat of each.
*Be careful of air bubbles when applying polyurethane. Had to redo the top of the table! (Use less/thinner coat with long even strokes)
-Minwax® Pre-Stain Wood Conditioner
-Minwax® Weathered Oak
-Minwax® Special Walnut
-Minwax® Fast-Drying Polyurethane
One* coat of each.
*Be careful of air bubbles when applying polyurethane. Had to redo the top of the table! (Use less/thinner coat with long even strokes)
Recommended Skill Level
Beginner
Comments
Jystadtler
Tue, 06/30/2015 - 19:07
Support question
I've been looking for a DIY table plan like this for a while! My only question is I have a long kitchen and was thinking of makig the table a little longer, so I can seat one more person on each side. With the extra length, will I need any additional support towards the middle?