X End Tables

Submitted by Laura Kemp on Mon, 11/23/2015 - 15:26

I made these tables using the rutic x end table plans. The finish I found on shanty2chic.com

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I found the finishing technique on shanty2chic.com. I used Rustoleum Kona stain on the whole table. Then on the legs and x beams I applied Vaseline on the edges and where I wanted the paint to chip off. After I applied the Vaseline, I painted the legs and x beams with Valspar Wet Pavement paint (grey-ish color paint). I had to let the paint dry completely, then sanded it down with 80 grit sandpaper to get that "shanty" look :)
Recommended Skill Level
Beginner

Comments