One of my favorite projects dollhouse projects we shared was this American Girl or 18 inch doll sized dollhouse -

Of course all the furniture in it is DIY too!

You can get the super easy to make American Girl or 18" doll sized sofa set plans here.

Now for that darling kitchen!!!

Of course we made it too, and it's all scrap wood!  

Here's how I made the kitchen sink - 

First, I drew up a quick plan (you can find that below, or if this is the homepage, you'll need to click READ MORE below)

Then I cut all the boards according to the cut list (also in plan below).  It's just 1x6 and 1x3 board scraps, if you bought the materials new, between $5 and $10 for everything.

Since I am nailing all the joints, glue is essential.

Okay, to start out I built the cabinet that sits under the sink.  This is the top being attached to the sides.  Notice how I attached one side first, and used the second side as a spacer to hold up the other end of the top as I attached it.  

Once the base was done, I built the sink the same way.  To get the angled corners on the sink back, I just set my miter saw to 45 degrees and cut the corners off at about 1" - you can do the same thing with a jigsaw or circular saw.

It was a little tricky attaching the base to the sink - I use 1-1/4" screws but nails would do as well. You'll need to attach at an angle to get the fastener in there.

And that's it!  Took me about 15 minutes to build the sink, and since I used scraps, free!!!

The hardware was an old handle pull that I found and spray painted brass.  But a hose bib fitting would be awesome too!

Of course, I'll be sharing with you soon the fridge and oven.

Enjoy the plans following!

XO Ana