This desk was made using the "Fancy X Desk" and "Modular Office Base" plans. A CPU enclosure was added with a similar "X" design. The top is 3/4'' plywood with 1x2's and 2x2's providing the framing. A 1x4 runs down the back of the desk with a cord try to hide cables.
Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Black paint and primer in one with 5 coats of polyacrylic on the work surface.
Recommended Skill Level
Beginner
Comments
Mamabear2
Mon, 06/08/2015 - 08:46
Modular Office Base
I am not able to find the plans you are referring to. Is there a way you can comment with direct link
ksc70x
Thu, 01/07/2016 - 15:16
Instructions for L shaped desk
HI, The desk is awesome and I thought I would make this my first attemt at building something.
But I am unable to find the instructions.
Please help.
Thank you.
ksc70x
Sun, 01/10/2016 - 08:46
Ok after reading the subject
Ok after reading the subject matter I realized that this is the merging of two different desks.
Can you post a photo of how you joined them.
The support for such a long desk is my concern, with out it having any middle support or at the the corner?
Thank you.
ksc70x
Sun, 01/10/2016 - 08:47
Ok after reading the subject
Ok after reading the subject matter I realized that this is the merging of two different desks.
Can you post a photo of how you joined them.
The support for such a long desk is my concern, with out it having any middle support or at the the corner?
Thank you.
rajeshahuja20
Tue, 01/12/2016 - 14:52
cannot find the plans
Hi,
Could not find attached plans. I did see the same comments before too for the same project.
rajeshahuja20
Tue, 01/12/2016 - 14:54
Could ot find the plans
Could not find the plans and instructions