Loft Bed

We built this loft bed for my daughters fourth birthday and she loves it.
I customized the plans to a full-size bed instead of a twin, simply so I didn't have to buy new mattress down the road. We also integrated a 16 gal saltwater aquarium, since she loves Nemo so much. It is a simple design that we feel we can customize as she grows.

Built from Plan(s)

Camp Loft Bed with Stair, Junior Height

Estimated Cost

$200 - $250 (wood & paint)

Estimated Time Investment

Weekend Project (10-20 Hours)

Finish Used

Valspar Gloss White (2 Gallons)

Recommended Skill Level

Beginner

Comments

HappyAnnika

Tue, 07/02/2013 - 15:39

Curtains

How did you attach the curtains? Very nice work.

btsmith76

Wed, 07/03/2013 - 06:33

Curtains

I used 2 wooden dowels cut to 77" (length of bed) and attached 4 cup hooks (link below) to hold dowels.

http://www.lowes.com/pd_330634-37672-491035_0__?productId=3192589&Ntt=h…

Marie320

Fri, 07/19/2013 - 11:47

plans

I saw your post on the full size loft bed. I've only seen the plans for a
twin size. what are the plans or how do I modify to a full size? really want
to keep my sons mattress. and I love the flat panel on the side by the way
and the curtain

btsmith76

Thu, 08/08/2013 - 07:32

Full size bed dimensions

The original plans show a 44 1/2" width for a twin size mattress. I modified the width to 59 1/2" to fit the full size mattress. The original length of the bed was 75", I extended this to 77". Also, keep in mind the overall height of the loft bed. The mattress we purchased is 12 1/2" in height/thickness. So I also modified the overall bed height from 65 1/2" to 72" and 45" clearance underneath. Hope this helps.

ldulitz

Wed, 08/07/2013 - 16:59

height of bed

i like how you have the extra 2x6 at the top. did you lower the height of the overall bed to do this? how high to you have it, and how much space did you leve between the "rows"?

btsmith76

Thu, 08/08/2013 - 07:37

I actually added more height

I actually added more height to the bed. The original plan bed height was 65 1/2", I modified that to 72". I added that piece because of the mattress height. We purchased a mattress that was 12 1/2" in height / thickness. The space between each row is 3".

bhoppy

Thu, 01/02/2014 - 14:03

Aquarium wall

I love all the modifications you made. Do you mind answering a few questions? What width of wood did you add to make the aquarium wall? Is it 1/4 inch plywood or thicker? I also noticed that you did not add another cross piece on the back, is that because the wall added stability and you didn't need it? Also I noticed you added 2x4's under the front side 2x6. Was that for stability as well? I want to make the full size version as well and appreciate your help:-) Thanks

btsmith76

Fri, 01/10/2014 - 06:41

Aquarium Wall

I used 1/4 inch plywood for the aquarium wall. The cross piece in the back was not needed. This is where our daughter gets in and out of the bed. The 2x4's in the front are just for aesthetics. They are not needed for stability. I used them to hide the end of the curtains. Hope this helps and good luck.

roccaburro

Sun, 03/02/2014 - 16:17

Plans

Do you happen to have a copy of the plans with your modifications done to it? Just I am trying to figure out how to convert the plans for a full size bed just not having an easy go with it LOL

btsmith76

Tue, 03/04/2014 - 08:12

Loft Bed plans

I'm sorry I do not have the plans anymore. The original plans show a 44 1/2" width for a twin size mattress. I modified the width to 59 1/2" to fit the full size mattress. The original length of the bed was 75", I extended this to 77". Also, keep in mind the overall height of the loft bed. The mattress we purchased is 12 1/2" in height/thickness. So I also modified the overall bed height from 65 1/2" to 72". Hope this helps.

skooter31

Sun, 11/09/2014 - 11:03