![](/sites/default/files/13819329_10154459627443489_1274725267_n%281%29_1.jpg)
I was so excited to participate in the #IGBuildersChallenge! My modifications included reducing the width a few inches so I could cut two boards from a single 8' length for both the top as well as the bottom shelf. I added two additional legs to the front so I could divide the table into three drawer sections. I also decided to make it two thinner drawers as well. I added the x's on the sides to match the x coffee table I built for our home last month! I used tongue and groove to attach the breadboard ends which is something I'd never attempted before and is something I will try again. The top is stained in Minwax Jacobean and topped with a satin wipe-on poly. The base is painted Ashwood which is a Benjamin Moore colour I had colour matched at Home Depot in their Behr Premium Plus line and then topped in a satin polycrylic. I'm thrilled with how my table turned out and have already received a request from a friend to build her one for their home.
![](/sites/default/files/13814575_10154459628533489_1051752043_n%281%29.jpg)
![](/sites/default/files/13823314_10154459632088489_1097557370_n%281%29.jpg)
![](/sites/default/files/13819617_10154459627528489_1950375428_n_0.jpg)
![](/sites/default/files/13817143_10154459627718489_1791818390_n%281%29.jpg)
Comments
handmadewithash
Sun, 07/24/2016 - 17:50
I love your version of the
I love your version of the console!
In reply to I love your version of the by handmadewithash
cutepickles
Sun, 07/24/2016 - 19:19
Thank you so much Ashley!!! :
Thank you so much Ashley!!! :) It was such a fun challenge!