Chunky Truss Table

Submitted by DangerDad on Thu, 12/11/2014 - 13:38

This is my first full sized table project.  I wanted to make an inexpensive dining table with nice looks and this one fit the criteria.  I deviated from the plans by making the legs frames and the middle truss using rabbit and dado joinery.  As a result the middle truss and leg frames did not have to be fastened together with any screws.  This design modification made it easier to build in the garage and be able to move easily into the house for final assembly.  Top is made of SPF lumber stained to match the natural colour of the cedar legs and truss frame.  Thanks Ana for the inspiration to build this beutiful piece.

Built from Plan(s)
Estimated Cost
$150-$200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Stain (early american) and Minwax Helmsman finish.
Recommended Skill Level
Intermediate

Comments

earthbybike

Thu, 12/11/2014 - 17:11

Love how you rounded the edges of the 4x4s and taylored the cross beam underneath. Just simply fabulous

ctufano

Mon, 07/24/2017 - 05:24

Hey Dangerdad! Wife and I bought cedar for the base and have all sanded, but are torn on how to stain. I liked your table, and was reading your description of your finish. Did you stain your cedar? You say you stained the top to match the natural cedar, so am thinking maybe you just sealed it without any stain?

Could you clarify? Thanks so much!

ctufano

Mon, 07/24/2017 - 05:25

Hey Dangerdad! Wife and I bought cedar for our table base and were discussing how to finish it. Did you stain your cedar? Your write up seems like you may have just finished it and not stained at all, and only stained the top? Just curious

 

Thanks so much!