Shoe Rack Bench

modern shoe rack with three rows made of stained wood
Difficulty
Beginner Projects
| Print this plan

This DIY shoe rack bench is very simple to make and cost about $30 of material. It’s very sturdy and could also be used as a bench for seating. Our boys keep their backpacks, books and lunch boxes stacked on top so that they don’t forget to grab it before they leave to school.

For more information on this shoe rack bench, visit The DIY Plan

Dimensions
Dimensional diagram of a shoe rack bench
Shoe Rack dimensions are 44" wide, 16-1/2" deep and 20" tall

Preparation

Shopping List

Tools for this project

Drill
Kreg Jig
Miter Saw
Tape Measure

Material List

• (5) - 2x6x8' 
2 1/2" Pocket Hole Screws
2 1/2" Wood Screws

 

Note: Lumber dimensions are listed as nominal size.  See lumber sizes for actual dimensions vs nominal.

Disclosure: Some of the links on this page as well as links in “tools for this project” and “material list” sections are affiliate links.

Cut List

Cut 2x6 boards as shown in diagram below

Diagram showing board cuts

Comments

Gena Elmore

Thu, 07/29/2021 - 10:01

Ana, I wanted to point out a mis-print in this plan. Your site says 2x6 and with 3 across it is supposed to be 16 1/2" wide. The link to the diy plan calls for 2x4s and 2x6. Please fix this to prevent someone else having to do a second wood run. Thank you :)