Difficulty
Intermediate
| 
This wood coffee table was originally designed to have each section slightly twisted and the middle section wider few inches then the rest of the table. But I decided to have each section same size and offset instead of twisted.
For more information on this coffee table, visit TheDIYPlan
Pin For Later!
29 1/4" x 29 1/4" x 17 1/2"
Preparation
Shopping List
Tools for this project
• Drill
• Kreg Jig
• Miter Saw
• Tape Measure
• Pipe Clamps
Material List
• (5) - 1x10x8'
• (3) - 1x4x8'
• (1) - 2x4x8'
• 1 1/4" Pocket hole screws
• 2" Wood Screws
• Wood Glue
Note: Lumber dimensions are listed as nominal size. See lumber sizes for actual dimensions vs nominal.
Disclosure: Some of the links on this page as well as links in “tools for this project” and “material list” sections are affiliate links.
Project Type
Room
Comments
Laney
Sat, 05/25/2019 - 10:58
This would be very cute…
This would be very cute painted like stacked books.