Community Brag Posts

I did your same couch but made the back lean in the middle parts 15 degrees. Love your website. I'm 3 years sober and to try to sell this on facebook marketplace.

We needed a coop for our son's chicken Penny as she was big enough to move outside. We wanted one that would hold at least 2 chickens as we plan on getting a second soon. We found the plans for the a frame chicken coop here and the next day my husband and 5 yr old son got to work. Took them about 3 hours from start to finish and it turned out great. He plans on spraying the whole thing with outside deck sealer to protect the wood and had some trim on the edges to protect the kids from getting scratched by the chicken wire.

This one will be around for a while... heavy as sin, but solid.
Used 11 2x2 removable slats per level spaced 5 1/2" apart by 2x2s.
Added a 44" ladder and back rail and front rail with 30 degree miter cut on 2x4s.

Next time, would have sanded & stained the headboard/footboard 2x6s on the ends before screwing them to 2x4s. Didn't have a sander that could get between the 1/2" gap and the hand sanding from position can be tough. Overall, very pleased with the result.

Kids love it! First of many projects I will be doing from this website.

Used Ana White's Husky Farmhouse Table plans/instructions and then made some of my own modifications to make the legs removable and expand the dimensions a bit. Turned out pretty good! This was my first project :)

Built this as a platform bed for guest bedroom. Nice, sturdy bed.

my very first project! i surprised myself on how AWESOME this desk came out! although im not a huge fan of the finish i selected but i can live with it. i also used oak plywood (which i will never used again), poplar and i also used cedar planking for the backing and drawer base. i learned a lot from this project, mostly what not to do for the future, like use plywood.

My wife and I wanted a changing table that could also function as a bookshelf, so after a quick Google search, I found the Ana White Ultimate Changing Table plans. I modified the original design by making the legs 36" and by adding side and back panels so that the piece could convert to a bookshelf when the baby gets older and we no longer need it to be a changing table. This was easy to do by using my table saw to cut 3/16" stopped grooves in the legs before attaching to the table and slotting in 1/4" plywood cut to fit before attaching the tabletop. Opted not to cut rabbets for the back panel as it would have changed the measurements for the drawers by recessing the rear 1x6 apron by 1/4". 

My wife and I are very happy with the results and the amount of storage we now have. She's so happy in fact, that I will apparently be building one of these for each future child as well! Thanks Ana White for the straightforward and easy to follow plans.

I made this as a special housewarming gift for a family we are helping out this Christmas. I didn't need to buy anything, but I love how it turned out.

This was an older hutch, oak in color. I took off the top glass doors off, put wood putty where the hinges were. I lightly sanded the hutch and cleaned it with TSP. Finally I primed and then painted black first. I used a candle to put wax on the area's I wanted to look distressed. After the black dried, I lightly sanded again, before I sprayed the red paint on. I lightly sanded the hutch once more, concentrating on the black to show through. Finally I glazed the hole hutch in a black. Black baskets were added to add to the appeal.

Wanted to build a cabinet for the entrance and liked the look of the Rustic X console but wanted drawers and doors too. Second piece from mainly own design just incorporating those Rustic X ends.

The piece is 6ft long for the main cabinet part.

Found the hinges off the internet and just trying to find some matching drawer pulls now. (Any suggestions greatly welcomed).

I wanted a place for a flag pole, but I didn't want to put one in the ground or screw into my siding, so I modified the cedar planter to hold a flag pole. It was a fun project!  Check out more here!

My son has been falling/climbing out of his crib. My wife wanted a toddler bed as soon as possible, which meant yesterday. She has had this in mind for some time considering she made this marvelous quilt for our little dude. The bed is pretty crude from a joinery standpoint. It's just butt joints with glue and screws. The dimensional lumber gives a nice break on the pocket book, especially when it's free from helping someone move it into my truck. The joints get some spice by button plugs. It's not finished with anything special, just some 120 grit. I figure we will probably paint it to match his new room in the house we are moving into next week. I wish I could have made it out of pocket holes entirely but the box o' screws wasn't in the budget when the wood is free and the 2-1/2" screws are given to you. Bottom line is that my wife is happy with her hubby the the little stud muffin is happy with his "big boy" bed.

Modern farmhouse bench used as entryway bench/storage

TV console table made of poplar wood. Shaker style inset doors. Solid wood construction. Painted with General Finishes Milk Paint and High Performance Top Coat.

Modified DIY Coat Rack! We call this our "Bear Proof" helmet rack. My daughter's chihuahua (named Bear) likes to mark anything at his level, lol. So I took Ana White's free coat rack plan and added helmet hooks to keep everyone's helmet off of the floor and safe from our little Bear. Thanks so much Ana! We all thank you so much for your generosity!

This is a farmhouse style kitchen table that I built for Mom's little kitchen. She needed more counter space and more storage space and had the perfect corner for it to fit in. These are based off my own plans which I have not published on Ana-White yet.

I needed more storage for our TINY kitchen. I found the nursery armoire plans and asked my dad to help me build it for a pantry! We modified it some by making it taller and adding more shelves inside (sorry no pics of that). For the doors I wanted to do something fun so we cut lots (over 700!) of small pieces of wood and inlaid then in a herringbone pattern - IN LOVE! For the handles we used copper pipe and I am IN LOVE with those too! Enjoy!

~ Maggie

Thanks Ana for your amazing tutorials, you are starting to help bring my house to life!