Community Brag Posts

Rustic X Console

Submitted by Tandi43 on Sat, 03/21/2020 - 12:10

Have a long wall and this was perfect!  I love everything about it!  I enjoyed working with miters for the 1st time!  FUN!!!! 

Built from Plan(s)
Estimated Cost
$75
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Varathane Briarsmoke and Clear Satin Eurathane
Recommended Skill Level
Intermediate

Long Modern Vanity

Submitted by Anonymous (not verified) on Thu, 11/02/2023 - 08:11

Designed and built vanity, mirrors, plumbed, tiled, and wired and installed lights.

Tanni

Mother's Day First Build - "Cameron" Vintage Storage Dining Table

Submitted by meggrs on Sun, 05/20/2012 - 17:04

This wasn't my first DIY project but it was my build from this side and first real woodworking project and it's been the most satisfying to date. I made this table for Mother's Day for my mom who has been dreaming of the PB Cameron fixed trestle dining table but couldn't take the hefty price tag. Things I changed: - I added the "pegs" on the table ends to make it look more like the PB version. They are just 1/2" round wood plugs glued to the trestles. - I was going to add two more tabletop braces underneath (again to make it more like the PB version) but I cut one of them incorrectly so I just added on more in the middle. I'm turning the boo-boo lumber into a yarn swift; waste not. Things I learned: - If the wood is going to be stained and varnished, shell out for the *good* stuff. I had to put on way to many coats of polyurethane to make the cheapo pine boards smooth enough even after I had dampened it to raise the grain and sanded it. - Don't believe the stated length of the boards you buy. 36-inch boards are actually 36 inches and a bit. I ended up having to disassemble and re-cut my tabletop supports. - Practice with your jigsaw if you haven't made curved cuts before to see how tightly you can turn. Luckily I had extra ply to make another couple trestles after I botched the first two...

Built from Plan(s)
Estimated Cost
$160 for materials
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Table base:
- Stained edges with Minwax Dark Walnut.
- Two coats Annie Sloan chalk paint in Old White.
- One coat Annie Sloan clear soft wax.
- Distressed edges with sandpaper to show stain underneath.
- One final coat Annie Sloan clear soft wax and a good buffing.

Tabletop:
- One coat Varathane wood conditioner. (Pine takes stain unevenly without it.)
- Three coats Minwax Dark Walnut.
- 18-million coats Minwax Semigloss Polyurethane. (It seemed like it anyway.)
Recommended Skill Level
Intermediate

Comments

tracysmith

Sun, 05/20/2012 - 21:33

I've had to learn some of those things myself since I started building a year and a half ago. Sometimes it's frustrating and even costly, but when you learn it, you learn it and you never have to again. haha Unless you're really a gluten for punishment. ;-) Good job and thanks for sharing with us some of those lessons learned.

Mirror Frame

Submitted by AndyH on Tue, 03/04/2014 - 11:00

We had a big ugly frameless mirror in one of restrooms that builder had fitted as standard. Took it down and made this framed mirror instead.

Made from 4 by 1 with routed recess for mirror. Edges are 3 by 1s

Finished in Rustoleum Driftwood and two coats of Minwax Satin WIpe On Poly.

It is quite heavy so I fitted it to the wall with a French cleat made from two scraps of wood which also means it fits flush to the wall.

Estimated Cost
$40
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Rustoleum Driftwood and Minwax Wipe On Satin Poly
Recommended Skill Level
Starter Project

Reclaimed Chilton Bed

This rustic farm bed is handcrafted from reclaimed weathered barn wood. The plank design and mixture of tones and textures give it a distinct rustic feel. Each piece celebrates the unadorned beauty of salvaged wood. Our reclaimed barn farmhouse bed is truly transitional. And now the best part, it can be made in any size needed -- King, Queen, Full or Twin.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Starwars AT-AT Walker toy

We couldn't find one in the store and my son wanted one for his birthday. I found an example online of a starwars themed charging station and he has played with it for years. Used some scrap wood and most of the cost was hardware and accessories.

Estimated Cost
$40
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Paint
Recommended Skill Level
Beginner

Playhouse castle

Submitted by vic b on Tue, 05/22/2012 - 17:44

visit us at www.madeatthisplace.blogspot.com, for details. We built a large platform off the ground and just put a house on top. Then gradually extended the design.

Estimated Cost
$5000
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

Aargh (not verified)

Wed, 05/23/2012 - 05:50

This is so bad ass!! One of my favorite memories of my own childhood was a huge cardboard box play house that my dad made. It has 3 or 4 rooms, I loved it. This takes it to a whole new level! Fantastic!!

birdsandsoap

Wed, 05/23/2012 - 15:12

...

^^^ There are no words up there because I am speechless. This is the coolest FORTRESS I've ever seen.

When are you installing the moat??

vicb (not verified)

Sat, 06/23/2012 - 07:46

Thanks guys, I'm lucky I have a husband who doesn't roll his eyes when I say, how about....... He loves building and so do I.

Two piece sofa table

I used a combo of a couple of Ana White's sofa table plans and I changed them so that two tables would fit together at the angle of my sectional couch. I used pennies on the top and covered in epoxy resin.

Estimated Cost
50$, (including, 25$ of resin, 25$ wood)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I couldn't find a stain that I liked so I used some old wall paint watered down and wiped off like stain. Then, I topped with three coats of a shiny clear coat. I really like the shiny finish of the pennies. This paint is Sherwin Williams Stunning Shade. I painted the top of the table in the same paint and then I glued the pennies down with regular Elmer's glue. I cut the pennies around the edges with bolt cutters so they filled the entire area. After the pennies were in place I covered them with a pour on epoxy resin. I used Super Glaze that I got at Home Depot. The Super Glaze was about 25$ and I only used about a third of it. I didn't included the price of the pennies in the cost. I used about 15$ worth of pennies. Most of the time making this project was in gluing the pennies to the table and cutting them to size. The actual woodworking of the project could be finished in a weekend, but this was my first project so it took me longer. (If you use pennies to top a project, I highly suggest getting pennies that are already the shine that you are looking for. I foolishly tried to was 20$ dollars worth of pennies and ended up with bowls of rusty pennies all over my house.
Recommended Skill Level
Beginner

First project. I'm hooked

Submitted by Anonymous (not verified) on Mon, 06/06/2016 - 18:41

Great afternoon project. This was my first build!  

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Dark wax on the top, chalk paint on the bottom
Recommended Skill Level
Starter Project

Sasha W/D Pedestal

This thing is AMAZING! If I was able to build as often as I do laundry, I would have a much more impressive brag list! Thank you for the plan!

Estimated Cost
60+scrap
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
I used black outdoor paint left over from another project.
Recommended Skill Level
Beginner

Little Kids Picnic Table

Submitted by DTMcF on Mon, 03/10/2014 - 15:33

Our first project from Ana-White.com - but certainly not our last! This preschool picnic table was an easy introduction for a couple of newbies. Our one-and-a-half year-old uses it all the time. Thank you!

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
interior paint & primer
Recommended Skill Level
Beginner

Comments

Door spice rack

Submitted by Anonymous (not verified) on Fri, 06/10/2016 - 18:02

love Ana!  We moved from the city to a late 1800's Victorian farm house with no closets, no basement, no storage!  This was a great Woodshop 101 project for my husband and me, and gave us extra space in the kitchen. Can't wait to do another Ana project. 

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
A mix of paint and water-base poly
Recommended Skill Level
Starter Project

Comments

Counter Height Garden Boxes by Janet Fox

Submitted by Anonymous (not verified) on Wed, 04/15/2020 - 15:21

My 15 and 12-year-old sons made two of these for me. Super easy, they followed the step by step instructions which were perfect, easy to read. They made two in only a few hours!

Estimated Cost
$130 in suplies
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

DIY Printer's Console

Submitted by Anonymous (not verified) on Thu, 11/16/2023 - 11:49

Built from printers triple console plan. 

Jkindle

Built from Plan(s)

Comments

More angles - little ladder shelf

I like the clean lines of this little shelf. Not sure whether it will become a plant stand or bed side table in the spare room. Found it quite tricky to put the bottom shelf in the right spot - even though the legs were fastened with 2 screws each at the top there was still enough give so that pushing a leg out or in a bit created a wobble. Ended up putting glue on and with the help of an extra pair of hands and a spirit level put the shelf into place by trial & error, making sure the whole thing stood nice and firm on the ground. Put on some clamps & came back the next day to put the screws in. Used a plug cutter to cut 'covers' for my screws from off-cuts of the same timber, but didn't quite manage to get the grain aligned so you still see them. Made these from decking boards (very close in dimensions to 1x3 boards) sold as 'forest reds' in the hardware store, which are a mix of eucalypt hard woods.

Estimated Cost
$18 for timber
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Exteriour grade clear poly-urethane
Recommended Skill Level
Beginner

Comments

Jake

Tue, 05/29/2012 - 16:35

Your step table, step stool, whatever you want to call it is beautiful. Great Job! I have made four of them. I reinforce the bottom shelf in case you want to use the step-?? to get stuff off high shelves or just paint a room and not mess with a step ladder. My first one is in our kitchen and it is the most used piece of furniture in the room. I got my grandkids and a little girl from across the street to build the others. The loved the experience. You can see pics at my page on Ana-White.

Bunk Beds!

Submitted by JayD on Sat, 03/15/2014 - 10:55

Great plans. Easy project -- made some mods and saved a bundle. My son is stoked!

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Outdoor Sofa.............Thank Ana

Submitted by Anonymous (not verified) on Tue, 06/14/2016 - 17:27

Thanks SOOOOOOO much for the Plans. I had fun building this and my Mother will be so happy to have it.

I'm sure she will be spending more time on the deck this summer.

 

Cheers, from Toronto

 

Chris,

 

Estimated Cost
$85
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
unfinished
Recommended Skill Level
Beginner

A Frame Chicken Coop

I built this chicken coop a few years ago for my cousin. I was happy with the plans, and the ease of the build, and she was happy at how easy it was to move. **This picture does not show the wheels installed.

Built from Plan(s)
Estimated Cost
$150 CAD
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Intermediate
Back