Community Brag Posts

My record obsession was growing rapidly so I needed a solution to store my collection and I wanted some room for growth. I wanted a setup where you could flip through the records like at the record shops. It's often difficult to read the artists and album names when you can only see the spines of the album covers. I decided to make a cabinet with 9 drawers which holds approximately 540 records (60 records per drawer). More details and photos on my blog: http://www.woodworkingfourdummies.com/blog/vinyl-record-storage Cheers, Ian

My wife used you patio sectional and table plans to make herself a summer oasis. She built it specifically to fit a corner of our patio that we were never using. Now it is used almost daily for reading, visiting or just sitting outside watching the birds.

I took the advice from another user who commented that the depth of the changing table was not suitable for a standard changing pad (16" x 32"). Turns out he was correct, so I modified the design to have a depth of 16 1/4" (as opposed to 15.5" in the original plan). Really not sure how someone could have made this and a standard pad worked as is. If I did it over again, I probably would have made it just a touch deeper for a perfect fit because the pad slightly flares out and is not 100% square. My wife also wanted a larger space beside the changing pad, so I increased the width of the table by 5" and it worked nicely as you can see in the picture with the lamp and other items.

This was my first project and love how it turned out. I have gotten compliments on it, but I unfortunately continue to look at the flaws in it and want to build another one. It was a great project though and I am in the middle of building the coffee table and end table as well. Here it is before we added all the odds and ends on to shelves and top

I modified the plans slightly, reducing the overall seating depth by 1.5" so I could use 8' lumber with minimal waste, and make 2 cushions out of one 54" width of fabric. I also tweaked the design to make a chaise lounge on one side. I used bargain priced sunbrella fabric (has a few imperfections) and recycled soda bottle fill for the cushions to keep cost lower. Building the wooden part was quick and easy (took an afternoon including two trips to the store), but this was my first sewing project so the total project time reflects my learning curve making and stuffing cushions.

In the middle of a much needed makeover on our back deck! We did not have skirting around the deck and decided that we would like to close it in for extra storage(ladders,compost bin...) and we came up with this little something as a bonus. We are always hosting backyard get togethers and seating is a challenge. Setting up and putting away chairs,ugh. This has been the perfect solution. This was completely an "as we went" plan but the biggest need to know is, heavy duty hinges! (As I said,the deck is getting a makeover so go easy on the appearance:)

Jodi and Matt B.

I saw the Farmhouse night stand on this website and decided to super size it so we could have a new entry table in the house. I added 1 1/4 inch to the height and extended the table top out to 36 inches. We decided to paint it black and distress it.

I made two of these bedside tables for our master bedroom and I LOVE how they turned out. Really like the white with my red mahogany headboard. These weren't too difficult to build. The only problem I ran into was trying to fit my drill in some of the tight spaces to get some of the screws in. I had to do a few of them by hand with a small screwdriver. I mostly used leftover scraps to build them. The tops are made of several boards kreg jigged together rather than one big piece. I was a little nervous about the drawer because I have never made one before, but it wasn't as bad as I thought and it came out just about perfect! yay.

This was my first project building something from this site. I absolutely love it! We didnt add the X's because the miter saw was at my dad's house, which I was kind of sad about, but I think it still looks good. Not too bad for mine and my husbands first build! 

This was definitely a project, but totally doable for anyone.
We had a bunch of scrap wood so we decided to do a different style for the headboard, everything else is to the plans.
Absolutely in love with it! Thanks to Ana for the plans!

Decided we needed some outdoor seating. Added a few modifications to make it more my own.

You can read about my project here...
love2dreamdoyou.blogspot.com/2014/01/hello-again-id-like-you-to-meet-my-table.html
This was my first building project--Ana's plans were great!

I built this in a few hours using some wood leftover from another project. I was amazed at how long it took to turn a pile of lumber into something useful. I happened to be at Lowes, but was able to find $6 bins very close to the bins in the instructions. I had to add about 2 inches to the length and take a 1/4 inch off the width. 

Tools

Compound miter saw

18ga nail gun

Clamps

Paint brush

My daughter loves it!

easy to follow directions

I loved the design of the apothecary coffee table, but knew a square table would look best in my space. I have a 15 month old son who's toys are always all over our living room so the toy box trundle seemed like a perfect secret storage solution for us. I combined the plans of the apothecary toy box trundle with the library coffee table. The 3 sides are built similar to the sides in the plans for the library table, as well as the table top. The toy box trundle was built according to the plans for the apothecary table except that I made it a very deep drawer 33"X34.5". The table top measures 43.5"X40" This was my first time building a piece of furniture (I've built a chicken coop) and first time using my kreg-jig to make pocket holes. I had a great time building learned a lot. It took me awhile to complete because I was only able to work on it when my son napped.

I modified this chair with 2x4's as the base and 2x2 for decoration on arms, this is prior to sanding and finishing