Community Brag Posts

This week I built a french cleat sanding station  to house my orbital sander and sand paper!

Blog: http://www.lanebroswoodshop.com/2015/04/french-cleat-sanding-station.ht…

Plans: https://drive.google.com/file/d/0B_RQfvQzkmz3OENtUWdmMENCYlk/view?usp=s…

Video:  https://www.youtube.com/watch?v=QYmm_NdeB7E

I really liked the basic table design.  But since it was going in my wife's medical office I decided to make the top out of Maple and Walnut.  It turned out to be a very big job.  I had to Straighten the edges of the boards so that they would fit together without a space between the boards and then put them through a planer.  I then glued the edges and used Kreg screws to put it all together. Surprisingly it all fits and the base sits flat and level.  I spent a great deal of time measureing all of the 2 X 4s in an effort to make sure that the base was level and the angles all work. 

A collection of different sized perfect end tables for my mother.

I love these shelves.  So simple to build and still make a big impact.  I built mine just a little different from the plan.  I used 1x3 furring strips for the bottom and back pieces instead of 1x4's and then ripped a 1" strip from another 1x3 for each shelf to create the front trim piece instead of a 1x2.  The shorter front trim piece gives me just enough ledge to keep the frames from slipping off the ledge, but provides maxium display area for the art work.  

For three shelves just like these you need:

• 7 -  1 x 3 x 8' furring strips 
• Special Walnut Stain from Minwax
• Satin Poly for finish (I also used Minwax for this too)

They were assembled using 2" fiinishing nails and lots of wood glue.

Was really excited to build this when I moved in to my new home. It's such a functional piece! I used different types of wood to cover it instead of staining it different shades. That was a fun puzzle to figure out. Really love it and thanks for the free plans!

I've been looking for a simple design for a consol table that I could easily modify to fit in my kids' club house. This one fit the bill perfectly! I also happen to have a pile of 2x4s left over from a closet demo, so I wanted to use those up. I basically built 2 of the consol tables, letting the 2 outer-most horizontal beams extend across and 25.5 inch space and connect the two consols. Then I put in a middle beam and that created the perfect space to set some catering pans in it. Also, I only had 2x4s so I used those for all the pieces, making the gaps a little wider than the original design. And lastly, because I didn't quite have enough wood, I shortened the vertical beams. If you look at the picture, all of this will make more sense! Thanks for the inspiration and direction! ps - I have no idea how to rotate the photos. Sorry!

This bed frame is for my daughter’s new house, in the guest bedroom.  She chose the design and got all the supplies to make it.  The wood is knotty alder.  It came out looking fairly close to the inspiration picture my daughter gave me to follow. 

I used the Cassidy bed plan and made adjustments to accommodate the iron piece.  The feet and top caps are made of one routered square with another slightly larger, unrroutered square stacked on top of it. 

Thanks for the easy-to-understand plans.  Everything I’ve learned about building has come from this awesome website!

First project. Thank you Ana for getting me started. 

This is a great beginners project. I wanted something that would match my living room and still be functional for my daughter to get her toys out . We have a full tutorial at our blog.... www.Ahouse-2-Home.com Also , if you have any questions please feel free to leave us a comment! Thanks!

Love this trunk! It was my first attempt at moulding and I probably should have practiced on scrap wood first (recommend)! But it turned out great and one of my favorite pieces (because it's filled with toys).

This is my first fine woodworking project after taking two classes at my local Firestarter FabLab community entrepreneurial center.  

I used wormy maple, the top is 40" x 1 1/2" that I used the CNC router to cut out.  The base I used 1" and glued everything to thickness for the the Square X Base Pedestal Dining Table plans, with a few variation.  For the 45's I only made 2x4's instead of the specified 4x4's and the same for the X on the bottom.  Thrilled with how it turned out.

Thank you for the great inspiration!

First project decided to do two of them one for a boy and one for a girl. I built and my wife painted. she already has plans for the next project.

My husband and I were discussing how fun it will be to take our little boy bowling once he is old enough to enjoy it.  From that conversation I got the idea of building a miniature bowling lane.    I was also inspired by Ana White’s #GetBuilding2015 challenge to make use of the large pile of lumber stored in my garage.