Community Brag Posts

I had empty spot in my kitchen and I wasn't able to find any nice looking utility table, so I figured to do it myself. I was looking for plan but didn't seem to find what I was looking for (If you find plans for the similar one, let me know!), so I end up using my left over 2x6 and 2x4's to make counter top and 1x4 for legs as for shelves. I made "grill" for the shelves from 1x2's. My kitchen has white cabinets so legs I painted white and counter top and shelves I stained same color than my counter top I made for my kitchen. I measured space between window and door and made it fit there, height is same as my kitchen cabinets.
I need to stain shelves one more time to get them nice, but i had no room to let them lay around the house so I had to put them together.

http://ourleaningtree.wordpress.com/diy/utility-table/

    I love how my co-op turned out! I added a few things. I made a door for egg collecting, I built 2 nesting boxes. I made a door for access to food and water and I made the middle 2x4s 10 feet so we found move it around the yard. It cost about $130 for me. I had some extra wood that I used for the boxes and ladder. The chickens and myself are enjoying the new coop.

Utilizing Ana’s plans I was able to build this great bed with a few “ extras”. Box joint drawers..rail/stile drawer frames.. peg joinery to name a few!  So much fun following these plans and achieving results that made one young man very happy!  Thanks Ana!!

When I first saw this I thought it was adorable and had to build it even though I don't have any children! I use lengthier guestimated times to include sanding, painting and drying times.

I built this easel for my wife who teaches 2nd grade using the plan on this site. I used a jigsaw to make all the cuts which is why some of them are not perfect. All holes were countersunk and covered with wood filler as I have not yet purchased a Kreg Jig. One sample jar of paint was just enough to cover the whole project with 2 coats. Home Depot sells the whiteboard in 2' x 4' pieces for about $10 in my area. The toughest part was getting the holes to line up just right for the bolts that fix the four main pieces together. Some of them I had to use a little bit of force to make fit. The plan was easy to follow and worked well. I added a curtain rod to the top to hang a paper pad from which I bought for about $5. The big whiteboard behind the easel was hung over the existing chalkboard using industrial strength velcro strips. I bought the whiteboard material from Home Depot for $13 for a 4' x 8' sheet (it is actually called a "hardboard panel board". It works very well with dry erase markers and was an easy, cheap way to install a whiteboard over the current chalkboard.

My husband and I built the two mahogany chairs and harvest table from Anna's designs.  Great project and have enjoyed thoroughly.

My wife has been asking for a bunk bed for the kids for some time. The room is a little short because it is in a basement and I knew I would need to modify the plans so I procrastinated.
I ended up shortening the height of the bed to 62" total. I also sank the top mattress down because it is a pillow top and the rails were not tall enough. Those were the easy parts. I then had to modify the ladder, I needed to shorten it and wanted a little more angle to it so some high school trig and I was on my way. It turned out pretty good I think.
To save money I used furring strips for everything but the 1x8s. It is very rough and the finishing is not easy on furring strips, but it saves some money.
I had some extra blue from a previous project but wanted it a little darker. I used a flat black water based paint for the base coat then brushed on an incomplete layer of the blue to give it the look I wanted. Sealed it with a clear coat.

As the kids are getting a little older it was time to retire the train table and pass it on to family. Although our living room is growing up we still wanted a place for storage, though.

I modified the Adirondack Coffee Table to include a lower shelf (just make a second box the size of the top one and screw it into the bottom of the legs) and made it wider and longer (49"x33") and taller (20"). 6 of our toy buckets will fit on the lower shelf for storage. By making the top 49" I was able to cut the 1x6 to make a top board and a bottom board from each (top 50" for a little overhang, bottom boards 46". 6 1x6 boards were needed to make the two shelves, in addition to the 2x4s. Since it is bigger there is also a stretcher across the center for a little extra strength (because we all know that at some point a child will stand on it).

It took me about 4 hours to build it and then a couple more hours spread over the weekend to stain/poly. All total this one was about 6-7 hours for me to build.

My husband and I bought a milk snake a few years ago. We had the cage sitting on our kitchen table. My husband was up north visiting his family and it irritated me. So I went out to the garage to see what we had. We had some tongue and groove and some misc. Pcs of scrap pallet wood. I slapped the stand itself together in a day. 3 years later, I completed it with the live edge shelf trim and the canapy, again using live edge. The pine log Pcs are left over from our basement knee wall ledge. 

pine jelly cabinet

Love these shelves.... Best part about them is they were completely free but add such a great country feel to my country style kitchen...

мой первый проэкт

We had to change to a slightly different size wood as the sizing of the original plan would have been very expensive in the UK. 

We also had to adjust to a different mattress size (90x190cm). 

We also had to work around a radiator. We left no gaps on the platform. 

Huge hit and very pleased with the result. 

To celebrate my daughter beginning Kindergarten, I built her a school-appropriate bedroom. Inspired by the Junior Loft Bed on the Walmart.com website, I modified Ana's Chelsea Bunk plan by changing the height and adding a built-in desk unit. The bed is 27.5" from the floor to the bottom of the siderail and has an overall height of 43". The desk section has a custom-built cabinet designed to fit her oddly shaped computer unit.

The room is divided into separate "nooks" with an overall emphasis on reading (she LOVES to read). There is the reading nook with her bookcase and comfy chair, a dressing nook with her stool and mirror, her study nook with her computer and school supply cubbies, and her sleeping nook.

Other modified Ana features in this room include the dollhouse bookcase, flat-wall book holder, numbered cubbies on the wall, and the vintage step stool.

My wife and I were expecting our first so we had to downsize from a queen to a full. While my wife was away for a week on a trip, I put this together. She always talked about a canopy bed and I think it turned out nice. I made a few modifications to Anna's design. The canopy is higher, I used edge support for the bed and I used dowels for everything with the exception of the lag bolts connecting the canopy to the bed. This was my first furniture project (other than shelves).

We took the original plans and made them work for our 5’6” x 11’ closet. We added a ft to the top because we have tall ceilings. We made 5 towers to create a u shape with shelving on the top. I also left one small bar long to hang dresses and the rest we double hung. We adjusted cubbies and drawers based on where we needed them. We were able to save by using old drawer slides from a falling apart ikea dresser. (We cut them down with a grinder).  We had an overflowing closet mess and now we have a beautiful closet. I wish the directions had a little bit more detail like average clothes hanging heights and bar distance from the wall. There was also no link to the suggested drawers or cubbies but we found them with a simple search.