Community Brag Posts

I modified the version of the providence table found here and on other sites to be an 8ft long table. I have found plans of a 10ft table with 4x4s as the base and then the 8ft version was with doubled 2x4's. But i wanted to have a 8ft table with 4x4s so i made one. I used white pine for the table top because i wanted to stain it and then pressure treated for the bottom because i was just going to paint it. I stained the top with cabot's australian timber oil in a honey teak to match our deck, I then painted the bottom with an exterior white paint. Let me know what you think.

Square coffee table based on a discontinued design from West Elm.

My boyfriend and I made this farm style table based on plans from Ana's site. We LOVE it. We wanted it to appear rustic with natural woods tones so we used Special Walnut Stain, Poly, and Light Brown Briwax. Even though it looks raw, its silky smooth to the touch. 

Thanks for posting these plans! We already on to our next project. We have the wood purchased for the rustic coffee table and console table, and I have my eye on the farmhouse bed frame and a set of night stand tables. 

Kate

Took your bench and used center to hold the mini cooler ,u-type frames fastened to 2x4 in bench frame underneath. all 2x4 with the exception of flip top which is 2x4 cut down on either side then the remainder cut again and sanded to give rounded edges. Mitre saw, table saw, 18 gauge brad nails around edges of top bench side and to fasten straps down covering cooler.

We made 6 storage chairs for our school area. I added two inches to the height of the chairs, making them 16 inches at the seat. I wanted them to last for several years. They turned out great!

Thanks so much for the plan!! I altered the plan so it would fit the cushions I brought and used 2x4s and 2x3s only. Total cost with cushions - $45! Excited to make a matching love seat!

I was afraid that 1x4s may be too weak, so I used 2x4s instead. It's pretty sturdy.

Cushion sizes:

19x20x3
22x24x6

I adjusted the measurements to fit the space. 

This is the shiplap fireplace design, we added built-ins to each side and left the mantel off, we may do one later. We love it and it added so much floor space.

Very easy project. It took a few hours from beginning to end including measuring, cutting,assembling and painting. I used salvaged wood from a pallet I got for free. The only cost for this project was for a can of spray paint. Great shelf for the playroom to organize art supplies. You can see more details of this project in my blog: http://blueberryjunkie.com/uncategorized/diy-number-cubby-shelf-a-potte…

My husband really wanted our sectional couch, but we had the hardest time finding a coffee table that worked with it. I went back to the store that we bought it at to see what they suggested, and they showed me a $700 that I fell in love with. Since I was not spending $700 on it, I did some research. Found these plans that were almost my dream coffee table, the only difference was the wood border around the outside. So my husband and I modified the plans a little and got to work! We made it the exact dimensions of the coffee table I wanted and are absolutely in love with our final product!

My front closet was transformed into a mudroom. Hidden storage is a genious idea. Thank you Ana!!! It wasn't easy though.

This is a variation of the green egg table to fit my husband's homemade smoker project. He loves the table!!

Made this desk custom for a friend and I am so happy with how it came out. Took around 4 days with finishing. I didn't put a back on it because drilling those holes for cords always goes rather splintery. If he wants a back we can easily put it on. The top ended up having strange coloring with the Dark Walnut stain, I think because of the wood filler, but I like it because it gives it a rustic old world kind of look. I saved a lot of money by hounding the scrap bin at Home Depot several times a week, looking for wood on Craigslist, and raiding my leftover stash. I modified the side so there was a tower partition and a shelf on shelf pins- courtesy of Kreg shelf pin jig. I used moulding I had sitting around to cover the exposed edges of plywood.

I was in need of two more parson chairs. So, I thought that I could maybe buy them from the same place I originally purchased my set, but they only had something close. I don’t mind mismatch when it reasonably works together. These did not. So I started my search…. Anything I liked was either out of stock, or way too expensive. I’ve been making and updating a few furniture pieces lately, but never made any chairs or stools. Why not? I guess I thought that they were too intimidating. I started doing some research on the web and learned that they are intimidating. But then there is a very talented person out there by the name of Ana White. She has plans for a parson chair that really made me say that this is not as hard as I thought. So I used her plans as a basis for my own. I used left over pieces of wood I had from another project. So why not try one and if it works I’ll do the second one.

I did however make a few changes to make it my own.

So our oven died back in July and we ended up having an unplanned mini kitchen remodel. One of the things I wanted to implement was magnetic spice racks in drawers, simply because we had a little space left on either side of the oven. Note: we hired a contractor to modify the existing cabinets because we had already been without an oven for over a month by the time home warranty decided they would have to replace the oven and we knew us doing it would take too long - a whole different, LONG story (read about that here: http://christinashaw.com/?p=1203).

But if you want to read more about the magnetic spice racks (which I LOVE, LOVE, LOVE, by the way!), you can read about that here: http://christinashaw.com/?p=1168

Floating headboard made for a friend of mine. Didn't have a picture of it mounted in their room but I wanted to get it up here anyway.