Community Brag Posts

This Christmas I was determined to have a fireplace for the stockings to hang from! I played with the design a little to add depth and height.... and tiled a little.

Loved the results for only my second project from here!! Not perfect, but mine!lol Thanks for sharing Ana!!

~Dina

I have built this table following the plan from the woodwhisperer website under the name "Not So Rustic Outdoor Table", Used white pine

Farmhouse bed and night stands. Second bed I've made with Ana's plans, absolutely love it and easy for all........Deb M.

This was a fun little project. Followed the plans roughly. I made a few changes in the fact that I only added 3 drawers instead of six and instead of using the casters I made legs. When using cheap pine from lowes its rather difficult to get a frame that is completely square. This makes it quite the hassle to get the drawers to fit properly. If I had to do it over again I would use better wood and be very careful that the frame is 100% square. But overall a nice project.

Inspired by Ballard  Designs Turin Bookcase http://www.ballarddesigns.com/turin-bookcase/237257

and the Marche writing desk http://www.ballarddesigns.com/marche-writing-desk/278164

with some tweaks to my liking :0)

First of all, thank you to the site for this plan. The headboard specs were spot on. I was interested in making a footboard as well, and you actually will end up with a few scrap pieces that will help you build the footboard (the 1x3's and 1x2's). My footboard ended up being about 23 1/4" high. For reference, the mattress in the photo is 10". I included a picture of the total boards you will need to buy to do the headboard, footboard, and side rails (I used 8 inch boards for the side rails, not 10 inch, but those could be interchanged). One thing to note is the plan calls for pocket hole screws but these are not necessary. I used 2" brad nails, 1 1/4" brad nails, and 2" screws (for the slats and the support rails on the slats. You could use 2 1/2 inch for the slats but the support rails need 2".). Not included in the picture I included is another 2x4x8 that I bought that I placed three scrap 4x4 posts that I had under the middle of the slats for extra support. I also bought steel bed rail fasteners ($11.30 from Amazon) to attach the side rails to the headboard and footboard. They worked great and the bed is extremely sturdy. Can't budge it at all. I used the common whitewood boards from Home Depot, which are all the correct width - the fur boards are cheaper but are not the correct width, you would need to adjust the plans if you were to use those. Overall I am very pleased with the bed. Please ignore the half dozen water bottles in the photo.

It was so much fun building this bench & shelf for my entry. I now have a terrific place to stash things and hang my coat and purse! I am planning to make boxes to fit some of the spaces in the bench.

This is my third Ana White plan. Thanks to you, Ana, and other inspirations I have came to through you, I have seriously improved my skills. This project took me about 3 nights, working around the schedule of my almost 2 year old. Would probably be a one day project. Took me a little sanding to get those rockers right, but overall much easier than I expected. I believe my neighbors will be very excited when they arrive home from the hospital tonight to find this in their living room. Thanks so much for all you do to teach and inspire all of us!

Simple stool plans modified.

I made this quick and simple wall art using some scrap wood and some pieces I got from a pallet.  I nailed them onto a scrap of plywood and used a stencil and some spray paint to finish it up.  It came out great! 

I've done a dozen or more of these letters now. Each letter has to be cut differently, but they are all made from 2x4s and pocket holed together using my Kreg Jig. I have also made some letters with curves (such as R, B, J, etc). I cut the curve out of a 2x10, left over stair stringer and then join it with some 2x4 for the rest of the piece. To make the base plates, I cut small blocks of 1x3 and rounded the edges with a palm sander. I used glue and finish nails to attach them. I have more projects like this on my blog http://pneumaticaddict.blogspot.com .

We built this table from Ana's plans using only a circular saw.  Yea Ana's plans!

This was my first project.

This isn't really woodwork but was something made to get my step daughter interested in the art of making things from wood (and other materials)

Made from scraps of wood after an idea we saw on Pinterest.  She helped paint them and make the eyes and scarves for them.

It's the smallest project ever done but hopefully will embed the "bug" into her that making things with your hands is fun.

She has another 5 to decorate ready for Christmas.

Maybe she will be the next Ana, you never know!! :-)

My little one refused to sleep in a cot so i sold it and made him a toddler bed with matching compactum. 

I used an old broken piano chairs legs on the bed.