Community Brag Posts

Variation using your King Bed Storage plans. Made from pine plywood and solid pine for the trim. Drawers made from aspen with pine fronts and 1/4 inch pine plywood. Took about 60 hours in my garage. Two large drawers (with bottom sliders) and 4 jewellery trays on the end piece. 2 smaller drawers (Custom fit without sliders) plus an open bin space on each side piece. Contrasting teak wood jewellery trays pop out with magnetic push catches. All joinery is with hand cut dovetails. Total of 144 dovetails.

I had to rescale the Ana White plan to an overall length of 72 inches. All joints are Kreg pocket holes.

The most difficult component was engineering the barn door slides. I used:
1/8” aluminum flat bar for the door mounts
1/4” aluminum flat bar for the fixed bar
Polyurethane spacers from Lowe’s
Lind Kitchen Mute Pulley block from Amazon.com 4 each

The pulley blocks were disassembled and only the wheels and axles were used. Thin poly washers from Lowe’s were used as shims to take up play after being mounted to the flat bar.

Please tell me I’m not alone…!! I must admit that I have found myself (on more than one occasion) just staring at a room for what seems like an eternity…trying to figure out why the space isn’t functional or just feels a bit “off”. It was during one of these “I dare you to blink before I do” staring sessions that I decided to build a table for my guest room.

Lucky for me, I can always count on Ana’s plans to rescue me from decorating madness! Well at least when it comes to the furniture part. (For everything else…I probably need lots of therapy!)

But seriously…anyone else get caught up in the time-warp-room-stare?! I can’t be the only one… :-)

My console table's complete story: http://gleeinspired.blogspot.com/2011/03/console-table.html

I modified this a tad from the original plans to suit my needs. I will eventually be adding a platform with attached slide and swing set.

Plans were easy to follow. My store didn't have 1x8's so I stacked 1x4's and used my Kreg jig to join them together and then I added extra bracing.

I had seen this on Pinterest a couple years ago and thought it was the coolest thing! Io excited I was able to build it myself!

Loved this plan, decided to use it for our living room TV console. Planning to add handles to the crates during a weekend when we have some free time. Very impressed with our final product :)

X frame farmhouse tilt trashcan. 

we put a few bolts in the legs for a bit of added strength, and extra back supports.

My church was getting new pews and asked if anyone wanted the old ones so I decided to take one and see what I could do with it! The second picture is what it used to look like. I had to take it all apart and cut it to the shorter size that I wanted. I then recovered it with some fabric I found for about $10. I then made legs out of a 2x4 and supported the legs with some 2x2 across the front, back and sides. I painted them with some black primer/paint that I had. This was so fun to do because I had to figure it out as I went along. It was a bit of a challenge at times and I learned a lot from this project. I really love the finished product.

I built this stool for my son of three years.  The wood is from Red Alder trees that blew down on my farm a few years ago.  I milled the logs with a friend and, while alder can behave badly, I always love working with the wood.  The end upright in the image was quite cupped and it cracked when I screwed it down - but it's still rigid and solid.  The wood takes an oil finish beautifully!  Chose to drill and plug the screws, instead of using pocket screws.  Gives it a nice rustic look, and is easy to recoat when a touchup is required.

Had to change it up a little..

I used the plans Ana offered as a starting off point for this project. I loved the photos of the exact plans, but it was too long and too short for the space I wanted to fill. I ended up building pull out drawers from pallets instead of installing the apothecary drawers in the plans. I used the bottom cubby to place a dog bed (which they love) and still have one one bin to build to fill the center hole. I used a solid piece of butcher block style wood on the top that I sealed Polyerathane. Thanks Ana!

I loved the husky farmhouse talbe and after using a small round dining table for years, I figured it was time to get a larger table. What a great build! I definitely appreciate Ana's plans and ideas. I finished it right before Halloween as you can see and my 4 yr old son loves the new table for our sit down meails.

This table is the perfect length for our dining area.  Pretty easy to build if you aren't new to building furniture.

We eventually will build the rest of the bed, but for now we needed a headboard. Hubby helped me with this one, since it was large, I loved having an extra pair of hands. This headboard is reversible, so if our tastes change, we can unbolt it and flip it over to the side that is just stained and polyurethane. Pretty neat! This headboard is extra tall, because we have our bed frame up on risers, and we wanted a picture shelf but didn't want it interfering when we sat up in bed to read or what-not. Hubby used the router to make grooves in the top before we attached it, so our pictures wouldn't be crashing down on our head! Our metal bed frame comes just shy of the outer edge of the legs of the headboard, so when we build the rest of the bed, the side rails will meet the edge exactly. We placed the headboard behind the bed frame to mark where to drill the bolt holes and attached the headboard to the frame with 4 inch long, quarter inch wide bolts with washers and nuts. Two on each side.

This was my first attempt at building a piece of furniture. It's an outdoor table based on the providence table plans. I used old 4x4 pressure treated posts from part of my fence that was no longer needed for the base. The posts were fit together using lap joints and secured using fastenlok screws. The base was then painted with french grey chalk paint (first time experimenting with chalk paint) and then covered with a thin coat of brown briwax. The top is made of 8 foot by 1 inch ipe boards that are 4 different widths but the overall width is about 42 inches. The ipe was purchased rough sawn and needed to be planed to uniform thickness. I used a natural stain meant specifically for ipe and other tropical hardwoods.

Keep on building on! This is the second peice I've built for our dining room - built a bar first. I opted to only make 2 pedestals instead of 3 that was on the plans. Dimensions are a tad smaller to fit our room nicely, measuring 90in x 40in. My wife and I absolutely love this table! I used Red Oak for the top and Doug fir for the base. Hardest part was lugging around that dense oak and looking for chairs! The stretcher was also a bit of a task as well. Had to go out a buy a rubber mallet to bang it in enough so that the slack on both ends were even. We particularly like this piece because it will be used often and many memories will be created around this table! Thanks again for the inspiration!