Community Brag Posts

My husband and I put this together to fit a spot that was just slightly off of what standard furniture would accomodate. Looking for something simple as a first build, we went with the Kids Country Bench and made some changes along the way.
We made 3 cubbies on the bottom shelf for extra storage and a little extra stability, since our boards were more bowed than we preferred. We also removed the front and back aprons. In the front we just attached a 1x2 that we ripped into a 1x1 as a trim piece. In the back, we centered a 1x2 to give a slight lip in the back.
I don't have a jigsaw, so we used my FIL's Scroll Saw. That was interesting ... but the sides turned out ok. Not perfect, but ok.
I was hoping to finish this with a high gloss product, but since the boards we ended up with more 'rustic' than I anticipated, I decided to embrace that and go with a distressed finish. I used a spray primer, and then one coat of Sherwin Williams yellow, covered with a dry brush of Sherwin Williams blue. I then sanded the corners and edges and finished with a spray top coat.
We had lots of fun, although it took us a long time. We were only working in small shifts, in between naps. If we had managed to get, say, 3 straight hours to build, I think we could have finished in in that time period.
This was a great starter project, and it's nice to know that we can make MINOR modifications to a plan and not have it fall apart on us :)
Thanks for the inspiration Ana!

I took the plans for the out door bench and using wood from a friends deck remodel I build a indoor bench. My wife was going to paint it, but we like the way it looks. We still want to add pads to the bench.

I built this doll house bookcase for my little girl for her Birthday. And she loves it!
I used white pine. I did not want to use paint. I did 5 coats of clear stain. I like the look of the natural wood and the knots to show.

My wife and I were expecting two grandbabies (a boy and a girl) in the Fall (about 2 to 4 weeks apart). We were asked by one of our Daughter's-In Law to make a changing table. We decided to do it for both grandbabies. These photos represent the result of the inspiration we got from Ana White's changing table design on her website. We liked the basic design but wanted it to have a shiplap look. We also wanted the top drawer to be a full drawer across the top and the middle shelf to be a pull out shelf with a drawer front. We were ecstatic with how they turned out, and so were the parents!

So this is the first build we ever did from Ana. The chairs were in 2'
sections and fit PERFECTLY in our new sun room, making a great
entertainment area with WAY more seating than we had before. We used
this plan (http://ana-white.com/2010/05/furniture-plans-collection-simple.html)
using the corner and back pieces. There are no cushions yet, but once
we find the right fabric they'll be going on--hopefully this summer!

We also used the plan here (http://ana-white.com/2010/05/furniture-plans-outdoor-storage-bench.html)
for the box in the middle. We also installed a bottle opener and ring
handleon the top, and a styrofoam cooler fits inside! we had a great
time building this, and I hope someone else gets as much out of it as we
did!

I used the Office corner desk plans to create this stunning desk. Most of the work was done at my local makerspace white the construction took place in my home. I laser cut the dragons into the drawers to match my overall Aesthetic.

Fun & easy, the console table took much longer than anticipated due to weird weather in our area & conflicting schedules.