Yellow Painted Outdoor Chair
![](/sites/default/files/yellow%20chairpin.jpg)
Bright and cheery outdoor chairs!
Bright and cheery outdoor chairs!
We made 6 storage chairs for our school area. I added two inches to the height of the chairs, making them 16 inches at the seat. I wanted them to last for several years. They turned out great!
Thanks so much for the plan!! I altered the plan so it would fit the cushions I brought and used 2x4s and 2x3s only. Total cost with cushions - $45! Excited to make a matching love seat!
I was afraid that 1x4s may be too weak, so I used 2x4s instead. It's pretty sturdy.
Cushion sizes:
19x20x3
22x24x6
Very easy project. It took a few hours from beginning to end including measuring, cutting,assembling and painting. I used salvaged wood from a pallet I got for free. The only cost for this project was for a can of spray paint. Great shelf for the playroom to organize art supplies. You can see more details of this project in my blog: http://blueberryjunkie.com/uncategorized/diy-number-cubby-shelf-a-potte…
In addition to adding two matching benches (idea from another post based on this plan), the following changes were made to the original plans:
1. Shortened the length of the table by about 14 inches.
2. Cut notches into the leg posts for the aprons to rest in.
3. Eliminated the stretchers (my wife didn't want them).
4. Cut the square 4x4 posts to an octagon shape (wife didn't want square legs)
5. Trimmed edges of 4x8 and 4x10 boards (wife didn't want the notches in the top caused by the rounded edges).
6. Used biscuits in addition to the pocket hole screws to assemble the table and bench top pieces.
7. Used a 1/2" rounding bit and router on the top and bottom edges of the table and bench tops.
8. Attached 3-1/4" Floor Protector Gripper Furniture Feet to the bottom of each leg.
End result: a very happy wife!
Made two of these twin Kentwood Beds for my boys by myself! Super easy and a never study bed! Can't wait to decorate their rooms now!!
We live in the south so we opted for treated wood. We weren’t able to locate all the connectors to combine sink sprayer and water hose so we ended up just getting another garden hose and sprayer. Works just as well. We used Smokey Mirror exterior stain to add some color. Didn’t have all the tools handy so we opted for a farm style sink that sits on top of the wood. Kids loving it so far, they have been playing non stop. Thanks for the great plan.
I modified your plan for a friend who wanted a slanted part. She is thrilled and so am I. Thank you so much for the plans and step by step instructions.
Susan Brubaker
I loved everything about this island, and knew I needed it for my craft room.
This was my first try at furniture building, and the step by step instructions were amazing, and so simple. It took me about 5 hours to build, and another 2 to sand/paint.
For the top, I used a table top from Ikea, and also added the rod and baskets from Ikea to the end of the island for holding craft supplies.
Made this desk custom for a friend and I am so happy with how it came out. Took around 4 days with finishing. I didn't put a back on it because drilling those holes for cords always goes rather splintery. If he wants a back we can easily put it on. The top ended up having strange coloring with the Dark Walnut stain, I think because of the wood filler, but I like it because it gives it a rustic old world kind of look. I saved a lot of money by hounding the scrap bin at Home Depot several times a week, looking for wood on Craigslist, and raiding my leftover stash. I modified the side so there was a tower partition and a shelf on shelf pins- courtesy of Kreg shelf pin jig. I used moulding I had sitting around to cover the exposed edges of plywood.
Wanted some easy storage shelving that didn't break the bank. These were perfect! $79 is what it cost for ours (which includes the $20 Kreg Jig). Lumber was only $58.68 and I bought and extra 8 foot 2x4, so it could have been slightly cheaper!
Two of my grandsons built this cedar planter after I did the cutting of the wood. They did all the measuring and put it together very nicely!
So our oven died back in July and we ended up having an unplanned mini kitchen remodel. One of the things I wanted to implement was magnetic spice racks in drawers, simply because we had a little space left on either side of the oven. Note: we hired a contractor to modify the existing cabinets because we had already been without an oven for over a month by the time home warranty decided they would have to replace the oven and we knew us doing it would take too long - a whole different, LONG story (read about that here: http://christinashaw.com/?p=1203).
But if you want to read more about the magnetic spice racks (which I LOVE, LOVE, LOVE, by the way!), you can read about that here: http://christinashaw.com/?p=1168
My Dad wanted a table for his chessboard to sit on with the wood from the board to match the table. I had seen this design on the website and liked. It was different then the last table I built, so a new thing to learn. This is my 3rd wood project. Not an overly challenging build, but like anything, special attention to getting everything square and (lesson learned) drilling the 2x2 with the pocket holes, ensure they are lined up, centered and the correct depth. It came out very nice, and I'm sure Dad will enjoy.
This measures 70in wide. I added a second shelf as well. I used plexiglass in the doors. I really love how this turned out!
I've built tables from this plan several times. This one was a little different in terms of the colour wanted. I also beefed up the support in the table frame itself.
Taking the plans for the full sized Murphy bed (http://ana-white.com/2010/03/plans-a-murphy-bed-you-can-build-and-affor…) I added a few inches to convert to a queen and raised it off the floor 5 1/2 inches with removable fence post toppers.
The yellow head board lifts up and stores inside the frame when up. If I had it to do over again, I would sand and paint as I built. Thanks to Ana, I now have a guest room!
Mon, 10/08/2012 - 11:13
Holy smokes! Great job! I just got my early birthday present - a Kreg Jig Master System!!! One of the first things I will be building is a murphy bed, so thank you for the inspiration.
It looks great!
Fri, 11/30/2012 - 20:18
This is fabulous! What did you use at the backing of the box? Is that fabric? The whole thing looks so nice!
Wed, 02/13/2013 - 11:45
I just wanted to know if you used the jig required or if you used something else? Camille
Thu, 04/25/2013 - 11:44
The jig is not required but it sure makes everything fast and easy
Wed, 04/24/2013 - 19:55
I love your adaptation of Ana's plans. Would you be willing to share the dimension for the queen murphy? Thank you!
Mon, 04/29/2013 - 14:32
I am wondering what king of hinges you used for the bed. Did you use continuous (piano) hinges or regular door hinges? How wide are they? I am not sure what the acceptable width for the hinges is to be safe. Thanks.
Wed, 06/12/2013 - 16:35
What were the altered measurements and exactly how did you raise it? I really like Anas plan except that the mattress was so close to the ground. I want to make this for my apartment and I'm painting the outside like a tardis. (:
Fri, 07/26/2013 - 18:50
I raised it 5 1/4 " using fence post toppers from home depot. The fence post toppers unscrew for upright storage. You could leave them in for a more dramatic look but I liked the cleaner lines with them out until needed
Sat, 11/02/2013 - 15:33
Would you be willing to share the dimensions you used when building your queen murphy? Even if they aren't exact, it would be such a big help to me!
Sat, 12/28/2013 - 22:56
In that same picture, if you look at the bottom 6 inches of the closed bed (under the hinge) there is a storage section where I hide the legs when the bed is raised. It is otherwise dead space and made for an easy storage conversion at the last minute.