Community Brag Posts

I needed a surface to work on all of the projects I'm building from Ana's wonderful plans!

I love how the stain turned out on this one. Super simple project!

The Ash for this table was sitting at a friends house out in a field for years. There were several 8/4 x 8' boards with various widths laying in the dirt. After many hours of planning and sanding I brought the Ash back to life. 

I had a few days a week to work on this project.  I needed to modify them by the following:

Size was 92" H x 47" W x 14" D.  I had two football helmet cases to place on these shelves and they had big cases above the standards shelf size.  The top of the case did not overlap the project.  I cut it to size.  I used Cherry Stain and did not varnish it.  I am not a fan.  One thing I would change is the wood.  I would have paid double for the premium select wood so that I know it is cut straight. 

This was my first project and it didn't turn out bad.  I never used the Kreg, but I think I became a pro after this one.  I would recommend going out and buying all the size pocket screws and have them on hand.  Also, buy the vises that you will need.  Trust me, they will come in handy.  I hate having to drive back to the store for things I should have had. 

Overall, I paid about 240 for the wood.  Since I only had the Kreg and no screws, I ended up shelling out a lot of money for the big buckets of screws and vises.  Total for the both came out to about 350, from wood stack to finish.  I would have paid more for one smaller piece at a store. 

I loaded this project months ago, but somehow it was removed I believe during one of the websit updates. So far in my wife's crafting life she generally cuts things out on the floor. It's not so good. Our dining room table is usually covered in food or playdough so she generally just spreads things out on the floor. I realized how much she needed a table, and armed with new power tools from Christmas and my birthday, I set out to make me a crafting table. This was my first project.

First attempt at a project and I have to say I am pretty proud! It may not be perfect but I think the imperfections give it some character. I used a dark walnut stain and finished with poly two coats.

Really great and easy plans to follow. The only thing I would do different is replace all the 1x3's with 1x4's.

Entirely made of reclaimed wood.  Sanded with 220 on a random orbital and applied two coats of polycrylic finish

This project was so EASY and it is just what I wanted over the entertainment area. We had some So excited that it came out so well and looks great! Thank you for such easy to follow instructions!

We're in a rental and the rooms are a good size, but on the small side of good sized. Thought this would be perfect to give my 4 year old a little extra play space. I added three extra 2x2s to the guardrail, it was a bit short for my liking. Other than that, stuck to the plans. It seemed when putting together the ladder that we were missing a piece and couldn't figure where it was in the plans, but I just ran to the store so we could keep the ball rolling. We love it!

I built this for my daughter, and she loves it!  Looks great and feels even better to relax in.  Now I'll have to build one for me, 'cause she's not sharing 

It took me a good 6 months to finish this since I started before summer, but it got too hot here in SC very fast. So I just finished it in January this year. It turned out great! Longest part was the finish work since many days it was too cold to put Poly on it. The actual building of the table went quick.

My husband's a music teacher and I had to build him this for our fifth wedding anniversary! I was looking and thinking about what to get him for a long time...then, I looked up what the "traditional" gift is for the 5 year mark. Wahoo, wood! Since I started dabbling into making things after discovering Ana's site last Fall, I thought, well no problem! Ha! Well, I had 2 evenings to build this thing with 2 toddlers helping me :-). I used the base of the stand from the plan for the Coat Tree. Then, I designed the top using the letters "R" & "R" for RoRo (what I call my Hubby). The top was cut using a jigsaw. Everything else, either a mitre or circular saw. The hardest part was affixing the top to the stand. Argh! Angles, drilling, messing up, argh! Somehow, it's put together and holding up, lol! Might I mention that when I first started building things, my hubby's first request was for a music stand. Well, there you go RoRo! Happy Anniversary!

This was basically my first ever wood working project. It didn't turn out perfect but I had fun doing it and my daughter likes it too! It isn't done yet, still need to figure out the color of paint I'm going to use.

This rustic modern version of a pub table has multiple uses - it can rest along a wall to make a 16 foot long bar, or rolled together to form an 8 foot long pub table. It is standard counter height 36" and will accomodate seating for 8-10 counter stools. If you don't have live edge wood slabs, you can also use construction lumber (2x8s or 2x12s) to achieve similar dimensions and versatile use in a more cost effective way.

Took about a week working an hour or 2 a day, but for my first woodworking project I think it turned out pretty well!

I've wanted to make this dress up storage since the moment I saw it; I planned to do this as my first building project. I finally got around to getting all the supplies and then I asked my father to assist me since i never really built anything like this before - well, he's not a patient man and he ended up building the whole thing without me (boo!) ... but I at least got to paint it! I absolutely love it and it looks fantastic in my girls' playroom.