Community Brag Posts

I loved the look of the crate, but my dog is a small Lhasa Apso - Poodle mix, so I had to cut down the size of it. To figure out the approximate sixe that I wanted to make the crate, I measured his current (ugly) wire crate. I forgot to take into account that a 1x2 is acutally .75x1.5 ish so my measurements were slightly off but the only thing it mattered for was the door. I used 1x2s for everything. I did not have a jig, so I predrilled holes and did it a little differently. I would have prefered to have the jig, but Home Depot doesn't cary the mini in their stores and I would have had to wait a few days for it. I built this on my own (I am a 22 year old girl) while my boyfriend is out of town as a surprise for when he gets home, and I am more then pleased with how it came out!

Here are my measurements:

21 inches high (the walls are 20 inches high, and the top gives it about an extra inch)
26.75 inches long (24.5 inches excluding the overhang of the top)
18.5 inches wide (17 inches excluding the overhang of the top)

I needed:
6 - 8' 1x2
1 - 20 inch wide pine board, 5 feet tall (for the top)
Corner brackets to connect the walls
Hinges
Latch
Screws

Tools I used:
Table Saw
Drill

Hope that this helps anyone who wants to build one for their little dog!

I pretty much just followed the plan. It did not take long to build, but I spent quite a bit of time on the finish. I sanded and sanded and sanded. I was going for a restoration Hardware type finish and got pretty close. This was the first piece of furniture I built. Recently moved to a farm so have been building farm needs projects and finally had time to build some furniture.  I purchased the bench cushions. 

Thanks for the awesome plans, information and site Ana! I love it!

Janice

added a shelf for a desk lamp

Ideally we would’ve loved to have found a nice thrift shop coffee table and added a nice upholstered top to make a cheap and cheerful bench for the dressing room.

Unfortunately, no such table was to be found. So we did what DIYers do. We built one ourselves. Of course, as usual, we had big dreams and no clue where to start. In theory it seemed easy enough. Wood, nails…put them together.

After visiting Ana White’s amazing site, we came across this plan. Come on, it has the word EASIEST right in the title! It was perfect for us. Our bench is tweaked somewhat from Ana White’s.

I went this up this afternoon after seeing the plans. It's only 3 feet long because I only had one board that was salvaged from a friends garage. I could not bring myself to use another piece of lumber I went this up this afternoon after seeing the plans. It's only 3 feet long because I only had one board that was salvaged from a friends garage. I could not bring myself to use another piece of lumber different

This project was greatly inspired by another user's version. The extra 1x2s on the front and the color scheme. Also, in the plans you are told to use plywood for the back, I ended up using hardboard because it is less expensive and also much lighter. I found the console to be quiet heavy already so this really helped. Finally, the other user stained the top with English chestnut and I used "special walnut".

Built this table to have plenty of room for all the kids and a few family members for holidays

My daughter talked me into making her this custom full size storage bed, with a power center and a night light.

We needed bunkbeds for our 4 and 2 year old before baby 3 came along. We used the basics of the side street bunk bed, combined it with modified plans of the playhouse stairs and then added bookshelves as the headboard and storage bins underneath. It took us about 4 different weekends plus to finish it. We used mostly 2x4s and 2x6s for pieces holding it together and 1x6s for most of the sides. We absolutely love how this turned out! Both kids have plenty of room for books and animals on their headboards. There are skinny shelves at the foot of the bottom bunk for books and the storage bins are awesome for cars, dolls, dinosaurs, etc. The stairs store blankets, toys, misc (there is alot of storage under the bottom bed too...just more difficult to get to...we cut 3 pieces of plywood for bottom bunk so we could access things underneath). The boards underneath the top bunk are 1x10s. The stairs were the most difficult part of this project. Hopefully this bunkbed will be passed down to grandkids! We had a great time building it! VERY sturdy too.

Thank You Ana White for posting the plans to make this great project! Mine is a little different without the "X" on the sides....maybe mine should be rustic ( / ) consule....

My husband built this twin farmhouse bed for our son. I stained and poly'd. We modified the plans slightly to fit our needs. We also added the trundle.

Submitted by Jennie Wood

This was my husband and mine's first DIY project! We started off using a miter box, and quickly caved and bought a miter saw. We also had trouble getting the X's to fit correctly, so we redid them and made it in a different order than Ana--we lined them up on the boards they would be attaching to and drilled in there. So we didn't make X's and then attach, but rather did it all at once. This made sure everything fit together!

Also, we didn't stain the top pieces of wood before we assembled, and it was hard to get in-between the boards, definitely recommend at least one coat of stain before attaching the top!

Had a great time making this bench, and love it!! Everyone that sees it is so impressed!! We made this one for outdoors, but we are thinking of making another in nicer wood for our indoor dining room table....

Wine hutch with added trim to give a finished look.