Community Brag Posts

This is my first big Ana White project!!  I built this bed with the basis of the Camp Style Loft Bed for juniors, but decided against the large stairs and reused some stairs i had built for our pop-up trailer.  They were smaller and took up less floor space.  I used all reclaimed wood from a house construction site (trash) except for 5 2x4s and the book shelf 1x8.  Because of this the project took significantly longer than her 'weekend' plans called for, but it was fun.  I spent probably 6-8 hours sanding/cleaning the wood.  You can see all the dimples or angles in the boards which give it a pretty cool look in my opinion.  I wanted to stain the wood to see all the pretty grain and knots, but my wife wanted a princess castle  so she won out.  

My mother help sew the super cute castle wall curtains.  We used Ikea lighting for under the ledge, and Ikea chandelier, and Ikea curtain rods to keep the project cheap.  Hope you like it.

My first grown up furniture, I didn't start small lol...The picture is not great, but I love it! I took advice from other comments, I sanded and stained each shim individually. Took ages!!!!! But well worth the effort.I used a gel stain and a glossy finish. I made matching nightstands as well using plans from another site.

We wanted a simple loveseat that used standard-sized cushions (that I found at target.com) that we could put on our narrow screened-in porch. The cushions were about twice the cost of the lumber! I modified the plan by changing the outsides from 2x3's to 2x4's and I made decorative panels of our State's flag using a stencil I created from an image on the Internet. I then cut the stencil out, marked it and cut it out using a scroll saw. The pattern is on 1/4' plywood framed in with 1 x 2's on the sides and 1/2" quarter round on the tops and bottoms of the patterns on both sides. This was fun and quick to build and it met our needs perfectly! I'm even designing some matching end tables for it! Since we're in Charleston, SC we used a color called "Charleston Green", it's nearly black but in bright sun you can see a little green. We barely get to use it though as the cat has taken it over! Thanks for a great plan!

This was a weekend build made from plans right here on Ana-White's site. There were a few changes made to make it sturdier since several (older) rambunctious toddlers were going to be using it. If anyone is interested in how much weight it can hold, two adults sat on this and it held up great. We have had this in the back yard for over a year now and it looks just as it did when it was first built.

This project took a few days longer than anticipated.  I was having an issue with my screws and stripping the heads.  After EIGHT trips to Lowes I found out that I needed a drill with torque and mine didn't.  Total costs: pipes & screws= $150.00.  Wood and stain = $170.00.  2017 pricing!  Amazing closet!  And for the record...I am a complete novice! 

This project took several months of off and on work but I am very happy with the results. Followed the plans on this website to the T and they were great. Got the wood from the local lowes and the hardware from Ace Hardware. Used the Kreg Jig pocket hole system to hide the fasteners which makes a big difference. I also used flat black spray paint for the hardware.

I loved the rustic look that this project was finished with so I did the same. The stain was great, really easy to make and stains really well. I covered the stain with the recommended wax which gives it a really nice shine and is very smooth.

Huge thanks to this website!

We found these plans and figured we would try it out! Worked great. We bought the Jig and the wood and took our time building it. We really love how it turned out. We made sure to take our time with sanding and filling holes. Our 6 year-old daughter chose the color.

Built for my new baby girl! Followed the plans with a few modifications. Used dadoes for the drawer bottoms. Added bracing for attaching the drawer slides. Used an old door for the top!

I am all about charm and character, but when it comes to my 1940s brick bungalow, the plaster ceiling cracks got on my nerves. Every changing season brought the inevitable expansion and contraction that would leave new mapped territory on the ceilings in the bedrooms. I usually just mudded over them and smoothed them out with a bit of paint, but that was getting old. So, I decided, after much brainstorming, to come up with a permanent solution. I created a ceiling treatment using beadboard and lightweight trim board to make a faux beamed ceiling. The rooms look great and I finished the look with crown moulding. I chronicled the project with detailed step-by-step directions and photos on my blog: www.momthebuilder.net. Check it out and let me know what you think!
-Angie

I originally saw this desk on Pinterest, which led me to this website. My hubby made it for me.  LOVE IT!!

Toy box for our soon to be son. 

My 1st build ...I'm quite happy with it and hooked on building! I made this for storage in my puzzle room. - Elva Boots

I wanted to add a little homey touch to my ledges so I burned a saying into one of the two ledges in each pair. My husband and I used the plan for the Ten Dollar Ledges and instead of painting, we finished them with Stain/Finish in one.

This is my first "finished" project.  It is made of 3/4 inch maple, which I purchased from a big box store.  I cut the top boards to 38 1/2 inches long and used seven boards (1x6's) for the top.  Using the kreg pocket hole tool, some glue and 2 clamps - I was able to easily join the top.  This process took several days because I only had 2 clamps and took my time joining 2 boards at one time.  The outer edge of the table is mitred 1x2's so the top looks like it is 2 inches thick, but it is only 3/4 of an inch.

The legs are made of four of the 1x4's glued together and cut to 18 inches in length.  The base (apron) is made of 1x4's cut to 30 1/2 inches long and attached to the legs using pocket holes / screws and glue - leaving a reveal edge.  I also added two 1x2's in the middle of the base for added strength for the top.  The top was pocket hole / screwed to the base.  

The finish is Generals gel stain in Java colour - two coats.  Then I added three coats of gel polyurethane.

I use the plans as inspiration to build a scooter from scraps I had lying around. I spent about $5 on the can of stain.