Half sized grandly sliding barn doof console
Built by Sarah Ashley Allen on Instagram
Built by Sarah Ashley Allen on Instagram
In March of this year, I was furloughed due to COVID-19. Like most people, I looked for something to do while hoping my employer would bring me back to work. I found your site and it has been a lifesaver. What started out as completing projects for our home, turned into extra income to pull through these tough times. I've really come to enjoy wood working and have built things I never thought I could have before. I modified this plan to use 1x4s for the seat and back because I couldn't find any decent 1x10s at the time. I then scaled everything down for the kid's chair.
Wed, 09/16/2020 - 09:47
I like the look of these with the 1x4's on the back, thanks for sharing!
So we had a pretty hideous bathroom (as seen in the last picture). The toilet was pink too, matching the tub and sink. This complete little bathroom remodel was an experiment to see if I wanted to tackle the master bath and eventually the kitchen. We had a drywall guy come in to fill the holes where the original towel bar, toilet paper holder and medicine cabint were. I actually used the plans from the Kitchen Cabinet Sink Base 36 Full Overlay Face Frame because I wanted a toe kick and a Face Frame. I added my own twists like a hidden toilet paper holder on the right, 45 degree tilt out in the middle, and a sliding shelf in the left drawer. I adjusted the dimensions for the space we had and used a soft close track and hinges. We went with a granite top due to the money we saved on building the vanity. We went with brushed fixtures and accessories like a hotel style towel holder. I want to give credit to my girlfriend and her Mom who did most of the demo work (not really sure why and that's her Mom in the last picture). My girlfriend's step father and I laid the tile (I have never laid tile before) and my girlfriend did all the decorating / finalizing to make it look complete and totally awesome.
Fri, 02/27/2015 - 09:38
Nice job customizing the plan. I'm attempting something similar -- modifying the kitchen sink cabinet to fit our vanity top, and adding drawers.
Sat, 07/25/2015 - 13:21
I love your finished vanity with all the little extras. Wish your plan was available! I'm not confident enough to do that much customizing yet. Great work!
I love this Miter Saw Cart. The plans were easy to follow and tweak to work with what I had on hand. I love all of Ana White's plans, passion, and inspiration. Happy Building!
Sat, 09/19/2020 - 20:55
I can imagine a lot of projects being built there! Thanks for sharing:)
My wife desperately needed a storage solution for her baking supplies in the kitchen. I came across Hillary's Locker Cabinet on Ana White's website, which gave me some good direction. I modified the plans a little to increase the storage space my wife needed. In one weekend my friend Robert and I built this kitchen cubby storage solution that organizes all the clutter, looks great, and doesn't take up a lot of room (6'x4.5'x1').
Thanks for the idea and wonderful resource!
This was my first attempt at furniture. My husband helped a little but I did most of the work. Worked out beautiful, an excellent birthday pressie for my daughter. Started cutting wood one afternoon, and finished painting and assembling the following afternoon (had a birthday cake to bake otherwise it would have been finished earlier). I used recycled timber for tops, the rest of the wood cost $50, so guessing Australian timber is way more expensive than USA. Bought Kreg jig specially for this project. Pocket joins give an excellent strong join. Had trouble getting crosses on bench correct, required many rescaling a to get right. Also had a wonky table because I screwed to the recycled timber top (some of that wood is warped) so fixed with a choc under two legs. Very pleased with result, look forward to my next project!
Love how these end tables turned out. The wood came from a maple tree and cut from my father’s sawmill, made for my daughter. They are stained gray.
This was my second Ana White project but the first from her new book.
It started out being 2 separate shelving units but once in the space they need to be modified to fit between the windows. I just removed the one side leg and screwed the shelves to the other unit.
the bottom shelf is perfect to house my 12x12 scrapbooks!
I did a little search to find a barstool and when I saw these plans on Ana White I fell in love. They were an easy build and didn't cost a lot. I made my stools shorter and altered the overall footprint. I like to plug all visible pocket holes which is easy to do and looks great.
Custom dog crate built using pieces of a dog gate for the front and sides. Door and back of the crate are shiplap.
I have been bugging my husband for a month to help me build this bed - he builds houses for a living, so the last thing he wasn't to do with his time off is deal with more saws and drills!
But, when it came to making Christmas lists this year, all I asked for was his time to help me with the bed... guilt trip!
So, Friday after work we went to Blue Store to pick out lumber - He thought rough cut lumber would be THE WORST THING IN THE WORLD, or at least he acted like it... so we got what we had to out of framing lumber, and the rest was premium white wood. We were lucky enough to find 4x4 fir posts too!
All in all, we spent about 5 hours making the bed (little did hubs know, he would thoroughly enjoy building furniture, and now explores this website for new projects!) and I used BM Antique white to finish. I wanted to try Ana's method of sanding edges and using stain pen, but I really do love the bed in just white. Still needs a poly coat, but that will have to wait until after Christmas!
Completed just in time for Christmas company!
The only suggestion I would make is when putting the top 2x6 on the footboard, make the back edge (closest to mattress) flush with the 2x4 below.... We centered it, and the mattress fits too snug to easily adjust blankets and sheets!
My wife saw a painter's ladder shelf at IKEA and wanted one for our master bathroom. I showed her the shelf on Ana's site and she liked that one much more. So ... a few hours later we had our new shelf and my wife couldn't be more pleased.
This took me forever to do even with the plans and I still had to rig it cause I just couldn't get it square. Im working on that but I'm very new at wood working and took this project on but I absolutely love it. This really cleared up my shed and space combined with extra tables to work on. I got to use it for the first time today and it was awesome. I think everyone should have one of these !!!
I built this using Ana's Small Cedar Shed plans. It was a fun and surprisingly easy build!
Sat, 09/26/2020 - 18:35
Looks like a fun project, I really like the look of the burned finish! Thanks for sharing your projects:)
This was one of the first projects I've ever built, so I would put it at a beginner level. It's a great, sturdy bed, very simple. The drawers are huge, which is surprising, since you don't realize how much space you gain when you add the drawers until you see how much they store. Thought I'd fill in details that worked for me that I had to figure out. As the plan says, the drawers are on caster wheels and slide directly on the floor, so make sure you have an area rug down if it's going to be on bare wood (especially pine, like this one is on). As another reviewer said, use 2" caster wheels, 12 total. This gives it the right height on a wood floor. You can get those in bulk at a home improvement store. I would recommend a slat system and not just a piece of plywood for under the mattress, as I was warned bacteria and mold can grow when the mattress is not given a way to vent. You can see in the picture, I had a bunch of 2x4 scraps and simply made a slat system out of that. I pocket holed the slats into the front of the bed, so no screws would be showing. I only finished the sides that would ever show, so the entire back of the drawers and bed itself are unfinished. I like the look of the drawers without handles, and they are just as easy to pull out without them. The drawers can get off track easily when being pulled in and out, so be careful when you use them. Otherwise, no problems with the drawers. I used wood glue and cheap drywall screws to attach the drawer bottoms (plywood) to the drawers. If you want to put anything of any serious weight in these drawers, really consider supporting the middle of the drawers on the bottom with some 1x2s or 1x3s, as it is a bit weak in the middle of the drawers. One more thing: I noticed standard dimensions vary slightly between finishing wood (1x12s, 1x2s, etc) and structural wood (2x4 studs), so keep that into account. Things were not flush because the finish wood was scaled larger than the structural wood. This bed is all about the storage underneath, which is great.
Tue, 08/13/2019 - 10:38
What an awesome build! I'm so sad I did not see this brag post earlier!
We appreciate all the details, I love that you made this bed even better than our plans!
Built this for my father for Father's Day he loved it.
I gave up my closet for a bathroom remodel last year...totally worth it. Since then my shoes have been stored in a pile next to my bed. So happy I found this wonderful pattern. I love my new shoe dresser!! Thank you Ana!!
I took this on thinking it would be a great addition to my home. And I was not disappointed. I am just getting back into building things. My only training was high school shop back in the Stone Age. Lol But it was a challenge that I think I did well with. Thank you Ana for the inspiration and instructions.
I'm a beginner at this, so for the most part I followed Ana's plans to building the Camp Loft Bed with Stairs. I made a few tweaks, including adding a slide to the front, putting the stairs on the other side, raising it by 7" (since there is a toddler bed underneath), and using hemmed shower curtain to create a fort underneath.
I made all the cuts with a miter saw and sanded all the wood down. I then glued and screwed the stairs, platform, and end pieces together. All the wood then got 1 coat of primer and paint. Then on Christmas Eve the bed was assembled in the kids' room. The sanding, priming, and painting took the longest. Cutting it and putting it together didn't take long.
For the railings, I did all screws from the outside to give a stronger hold than the pocket holes, and used 3 3/4" screws for the weigh bearing pieces. I counter sunk all the screws and added buttons to cover them (not yet painted in the photos). I also mounted the 45 degree 2x6 cuts in the 4 weight bearing corners to add extra bracing (not pictured). To brace the slide, I glued and bolted a 4x4 on the front of the bed. The curtains are just 2 off the shelf shower curtains that got hemmed to the correct height, and then were mounted using small teacup hooks. I plan to add an eyehole to each side, so they can be pulled back and hooked open.
Mon, 05/27/2013 - 13:35
Bmas, this is AMAZING! As we get ready to move to a new home, it's a great excuse to build the new kids bed and kitchen table I've had on the back burner.... Where did you get your slide if we wanted to go the same route?
Thanks,
David
Mon, 05/27/2013 - 13:36
Bmas, this is AMAZING! As we get ready to move to a new home, it's a great excuse to build the new kids bed and kitchen table I've had on the back burner.... Where did you get your slide if we wanted to go the same route?
Thanks,
David
Comments
Kfanucci
Thu, 04/12/2018 - 04:13
What color stain did you use for the top?
Could you tell me what color stain is on the top?