Camp loft bed and twin
Built this camp loft bed and twin for my two daughters they love them and this wasn’t that hard to build. Thank you Ana for these great plans. Adjusted the height of both to accommodate for the ceiling fan.
Built this camp loft bed and twin for my two daughters they love them and this wasn’t that hard to build. Thank you Ana for these great plans. Adjusted the height of both to accommodate for the ceiling fan.
I built a couple of the barn door pantries before, but this time I had some wood from my brother's barn. I had purchased a metal grate at a flea market some years earlier, but could never decide what to do with it. With my husband's help, I integrated it into the door. It turned out to be a beautiful piece.
I based this console off of the Rhyan's coffee table plans. It about 6 1/2 feet long and just under 2 feet for both height and depth. The frame is reclaimed pine off of a barn, the shelving, the sides and the drawer fronts are irregular cedar planks and the drawers themselves i believe are actual 1 in thick white pine boards that were rough milled. Hopefully the pictures can answer any questions you have about this build but feel free to contact me if you have any questions. I was very pleased with how this project turned out since I was making so much of it up as I went.
I started using the basic dimensions and cut list from this plan. I decided to use as much repurposed barn wood as I could (80%) in this project. I tried to keep the rough cut weathered look. On the sides I used wrought iron balusters in place of the wood X pattern specified in the plan. I used matching wrought iron drawer hardware and topped it off with a butcher block table top. This is my very first piece of furniture that I have ever made and I'm very happy with the way it turned out!
After seeing someone else's version of Mimi's faux mantle with shelves, we decided to make our own! We followed the plans for the mantle & made a few adjustments & made our own plans for the side shelves. Stained the top with special walnut, light grey chalk painted with wax, & used faux brick siding from lowe's & painted the bricks white. Wasn't too hard & love the final product.
I had some cherry wood left over from a different Ana White project and used that to make this "Kid Tower" for my one year old great niece. I used dowels for the two ladder sides and furniture connectors for the other two sides. I finished it with Rubio's.
Steve B
Our back door entrance closet was cluttered with shoes, boots, pet food and more. Strategically scattered at the bottom.
Originally the closet had a flat panel door with a poorly patched hole from a neighboring door, unpainted interior, one shelf with a hockey stick closet bar. A complete eye sore.
Solution:
Constructed a 5 shelf "simple closet organizer" with dimensions of 72"H x 13"W x 16"D. The material was four 72" x 16" particle board shelves purchased from HD for $10 each and a 100 particle board screws with painted white heads. I already had the closet rod with the hardware ($5 each) to hang the rods.
The new closet has a six panel door (used the door jig purchased for the doggy door) updated hinges and knob ($25) to match the rest of the house.
We painted the interior of the closet with left over wall paint.
Problem solved.
I like many on here, I hate particle board but the better half didn't want to paint the shelves, so the compromise was reached and we got the particle board haha. Nice on the pocket book and didn't pay extra for the crappy ready to go stuff plus I got to play with my tools.
This was a very simple build. I was able to finish in a few hours by myself with 2 young children hanging around my ankles!
The supply list allows enough extra to make 2 or 3, making it fairly inexpensive!
By far the most utilized thing i've ever made.
I followed this plan (http://ana-white.com/2010/03/plans-mason-headboard-its-all-in-finish.ht…) and my headboard turned out beautifully!
I chose to stain my headboard prior to dry brushing with paint.
While a beginner can complete the headboard, distress it, and stain it in a few hours, the stain needs to dry at least 24-48 hours prior to distressing/painting. And then the paint needs to dry at least 24 hours prior to wiping on the poly finish. I'd give yourself one week from start to moving it into your room.
Fun to build, good skill level assessment. Time estimate on point. I decided not to apply a finish so my wife could choose what she liked. Re: materials, I found a set of four 1 5/8" casters @ HD for 5 bucks. Not sure if as good, better or not as good as what is recommended by the plan details, but they are working so far. The sizing was perfect for our big round IKEA pots. I will make 2 more for the other two pots. Keep up the good work.
I was excited when I seen Ana's diy sofa and could not get it out of my mind. I ended up making a copy of her instructions and figured out how I could do it at as little cost as possible. I downloaded JAF app on my phone. Signed up for JAF with my email, which got me an additional 20% off my total purchase, and then I printed up a 50% coupon from JAF website. I was able to use all of my coupons after waiting until no one was in line and telling the clerk that if she didn't let me check everything out seperately in order to use my coupons, I wouldn't be able to afford it, and they would have to put everything back, and that would really be sad.
Yea!! Out of the goodness of her heart, or the annoyance of my begging, she did it! God Bless Her.
I ended up using
2 50% off coupons
1 40% off coupon
1 20% off coupon
My beautiful material was already on sale for 50% off which made me feel like the sun was shinning really bright on me that day. It rained the next day.
I went to homedepot with my plans and asked them to cut the pieces of wood out for me because I didn't feel like arguing with my husband about using his saw again. He bought me my own but it's not a nice table saw like his. He thinks I'm stupid. He bought me a jig saw.... Crazy!!!
Then he tried to lock me out of his tools, but I just put every combo I could think of into his big lock and Pop goes the Weasel!!! I did lose one of his bits, though. I'm very sorry about that and I hope he don't notice. I've been praying on that part.
I used 3 & 5 Density Foam. The foam is where you will need to use your coupons because it can get really expensive. I would have ended up paying about $100 more if I didn't use my JoAnn coupons.
Thanks for the inspiration Ana! My daughter wanted a custom size hall tree and bench with a light switch cut out - basically your plans with an ebony stained poplar seat and bead board backing (to match her wainscoting). I had a little crown left from another project so I added a little detail to the top shelf.....And a Couple of lower level Hooks for the grandkids coats! She loved it and it was fun to make!! Mike in Columbus, OH
Home Depot Rolling storage cart for our Berkey!
Leon
This was the second project I've ever built. It was an easy project.
Had a horribly messy front entrance so really needed this shoe cabinet. It's dimensions suited my space better than an Ikea one, and accommodated more shoes. This being my first project, I am glad I started with this instead of a loft bed, since I made alot of mistakes (& corrections) along the way. Although some of the problems occurred because of pieces that ended up being convex. I chose to fill in the gap between the two boards on the front of each bin. It worked out really well.
Really love the Kreg Jig! So worth the investment.
Could not figure out how to properly use magnet catches. Did apply one to one side of the top drawer but it doesn't work too well--pulls the bin too far in.
Easy to follow plans, made the table, Bench and four chairs as a set. I used valspar new black paint in a flat and top coated with valspar Woodrow Wilson linen. Hand sanded for the distressed look. I jointed the edges of the table top, rounded the outside edges and stained with minwax provincial oil base stain then top coated with six coats of minwax helmsman high gloss poly.
I was given this bed frame by a neighbor whose children had outgrown it and wanted to make a few changes before putting it in my son's room. I took the original frame (built from Ana's Farmhouse Bed woodworking plans) and stripped most of the existing finish. Then, I stained over the stripped paint to give it the distressed look. Next I created the DIY geometric wood art to fit in both the headboard and the footboard. To do this I cut down scrap 1" thick lumber to varying widths and arranged it into a geometric pattern. This was such a fun project and I absolutely LOVE how it turned out! I wrote out every step of the process in this blog post: https://mamaneedsaproject.com/diy-twin-bed-frame-with-geometric-wood-ar… Thanks!
My husband made this doll bunkbeds for our granddaughters for Christmas! They loved them!!
My husband and I put together this nightstand together over a period of a week. We have a curious and energetic 3 year old boy so had we been able to stay on project we could have finished over the weekend. It was our first time doing any build that had a drawer and our first time doing pocket holes. Our bedroom now has the farmhouse queen bed, a refinished matching dresser and finally the farmhouse nightstand. It was a learning experience but we are very proud of the outcome. Thanks Ana! It's a very rewarding experience to be able to do something like this. I wouldn't have started any of this without your inspiration. Looking forward to many more builds :)