Community Brag Posts
Ultimate Wagon
![](/sites/default/files/20220421_145010_0.jpg)
I used recycled oak to build wagons for four kids that year. My son Dakota, his cousins Colt and JoJo. the last one I gave to a boy with cerebral palsy who was being raised by his father and they lost everything to a fire just before Christmas. That is him in the wagon
Comments
Colorful Patio Makeover!
I pulled up the ancient green carpet on our patio, gave away our old cheap rusted table and chairs, and built four adult-sized Adirondack chairs from the Home Depot DIH plans and two child-sized ones from the plans in Ana's book. All are painted in Olympic's Schooner. This took forever, but I love the result! A friend dubbed it "the partio." :)
![](/sites/default/files/3154831139_1374945617.jpg)
![](/sites/default/files/3154831141_1374945617.jpg)
Comments
Sat, 07/27/2013 - 13:47
What a transformation!
This is absolutely beautiful! Love your color combination. Great job!
Sat, 07/27/2013 - 14:08
This is awesome. Colors you
This is awesome. Colors you choose is really good. http://www.assignmentshelptutors.com
Patio Stools 35 inches
![](/sites/default/files/FullSizeRender_18.jpg)
I adjusted from the plan to build the stools to 35 inches and found they remianed very stable! Used Cedar for the seat and aprons, and redwood for the legs and supports.
Jewelry Box
![](/sites/default/files/20220422_164839%5B1%5D_0.jpg)
Made from Pencil Cedar from a tree felled at our church.
Finished with Danish oil
![](/sites/default/files/20220422_164859%5B1%5D_0.jpg)
![](/sites/default/files/20220422_165600%5B1%5D.jpg)
Comments
Perfect Shelves For Any Room!
![](/sites/default/files/beans%20shelves.png)
Had a Blast making these shelves for my daughters room last Summer! (sorry for just posting now) She had such a long plain wall I thought what a perfect way to take up space but still have places for her toys! She loves them as much as I do!
![](/sites/default/files/beansshelf3.png)
![](/sites/default/files/beansshelf2.png)
Comments
Wed, 06/15/2011 - 12:05
They look awesome! Love how
They look awesome! Love how the bins fit so perfect.
Play Kitchen
![](/sites/default/files/3154831289_1375193988.jpg)
Before my daughter was born I started planning a play kitchen for her. Last week she turned two and this was my gift to her. I borrowed ideas for details that I had seen on this site from several different kitchens.
Comments
Cupboard
![](/sites/default/files/image_1012.jpg)
Spend some time on pintrest and made this nice Cupboard hard to find the right plan but its my first furniture so freebasing and a few misstake later.
Comments
Thu, 03/11/2021 - 06:08
Cupboards for Classroom (no glass, replace with barn door look)
No glass, replace with barn door look. Fix the bottom to look like dresser bottom.
Barn Door Cabinet with Top Shelf
![](/sites/default/files/jason4.jpg)
This was something I made for my mom. Saw this design at a furniture store. Decided I could build it better. The bottom piece I used one of your plans (adjusted for the size I needed). Thank you for all your creative designs and plans.
by Jason
![](/sites/default/files/jason3.jpg)
![](/sites/default/files/jason.jpg)
![](/sites/default/files/jason1.jpg)
![](/sites/default/files/jason2.jpg)
Finally a bed for my little girl
We are poorer than poor which I am sure some of you can relate to. This means I have been looking longingly at Ana's site for more than a year now with no hopes of ever getting anything of my own started. But, I borrowed my brother in laws tools. I started small and sold some stuff and now I am building (still slowly) with 100% money earned by my new craft, talent, and sweat! This means I only get to build something for me every two projects or so, but feels AWESOME not to be taking from a very tight monthly budget.
I sold everything in my daughters room that counted as storage to help along the process. So she has needed this for a while now. I am so excited that it turned out looking so well. It was a pretty easy build and I am so happy. She loves it too. THANKS ANA!
I extended the sides from the original plan so that it was all open and then designed a footboard. I'll post the plans for that extension.
![](/sites/default/files/1-%20side%20cubbies_0.jpg)
![](/sites/default/files/3-%20footboard_0.jpg)
![](/sites/default/files/Audrey%20bed_0.jpg)
Comments
Sat, 06/18/2011 - 12:55
Good for you!
So exciting that you paid for this bed from profits from other builds! I'd love to do that myself, and seeing this post is such an inspiration!
Sat, 06/18/2011 - 13:29
inspiring
I do relate to this post, but just the first part. Poorer than poor and looking at the sight longingly. In fact, I haven't been on here for awhile because it just makes me antsy and frustrated.
I would love to get some tools. I told my sister in law that my brother should just gift me some of the old ones he wants to sell, in repayment for all of the back scratches and sunburn peelings I did for him. Haven't heard back about that yet :) But he lives a long way away so I could buy some cheaper than the gas prices to go get them :)
Sat, 06/18/2011 - 13:57
you must be so proud!
now THAT is what i call being a good steward(ess) of your money; and your daughter must be ecstatic to have her own beautiful bed!
Sat, 06/18/2011 - 20:15
Beautiful!
Your daughter must be so happy! It turned out beautiful! Great job!
Sat, 06/18/2011 - 22:31
Thanks for the inspiration
Thanks for the inspiration and congratulations on a great project!
Sun, 06/19/2011 - 02:53
Waiting for your plans!
Love your take on a storage bed. I'd been thinking about making a few adjustments to take the storage off the end of the beds. Looking forward to them.
Sun, 06/19/2011 - 06:58
can definitely relate...
I LOVE the headboard, i still have plans to do this in the near future...what a lucky girl!
Sun, 06/19/2011 - 11:43
Truly your determination
Truly your determination touched my heart. Thank you for inspiring us all!
Sun, 06/19/2011 - 18:47
Awesome!
YOU should be very proud!.. This is very ecclectic, chic, elegant.. multipurpose grow with you bed.. AND YOU did it.. Awesome... !!! I bet your daughter is very happy with her bed....
I love the headboard.. Ingenious.. i've been thinking on how to integrate the tufted look with Ana's plans.. And now i have you to thank for the Inspiration....
Mon, 06/20/2011 - 10:36
Inspiring!
Your candor and honesty about your situation really hit home with me .. though I suspect there are more than just a few of us struggling along. Thank you for sharing and proving again that it IS possible. Your daughter is fortunate to have such a great role model (and such an awesome bed and room!). Thanks for sharing - truly inspiring! And thanks again to Ana for helping us all to expand our roles as home-MAKERS!
Mon, 06/20/2011 - 12:51
THANK YOU ALL
I am so touched that everyone took time to look at my little project, and obviously read my story. Thank you all for such encouraging words. I LOVE that Ana has enabled us all to be a little "family" in our venture out of our comfort zones.
Tue, 12/04/2012 - 15:41
Hi redhead_61, I love the
Hi redhead_61,
I love the projects you have posted on here and think it is amazing that you now build custom projects. I have just done a couple projects and want to do more because of the thrill of seeing something and making your own creation from it. If you don't mind me asking how did you start selling your projects? Do you have a website?
Tue, 12/04/2012 - 15:42
Hi redhead_61, I love the
Hi redhead_61,
I love the projects you have posted on here and think it is amazing that you now build custom projects. I have just done a couple projects and want to do more because of the thrill of seeing something and making your own creation from it. If you don't mind me asking how did you start selling your projects? Do you have a website?
Wed, 12/05/2012 - 08:00
Hi redhead_61, I love the
Hi redhead_61,
I love the projects you have posted on here and think it is amazing that you now build custom projects. I have just done a couple projects and want to do more because of the thrill of seeing something and making your own creation from it. If you don't mind me asking how did you start selling your projects? Do you have a website?
Fri, 06/24/2011 - 05:37
Love this bed
I have been searching for plans to make a bed for my daughter for over a month now. I found a few that would serve the purpose but were not quite what I wanted. This bed, however, is perfect! I love the storage and it seems easy enough for us girls to handle. I plan to pick up the wood tonight and make it over the weekend. Thank you for the great project.
Wed, 07/06/2011 - 18:55
great job:)
I have been longingly looking at several plans from this site for awhile myself, but we too are poorer than poor! I mean like struggling to keep toilet paper in the house not sure where the groceries will come from next week poor! BUT your post inspired me:) I'm soo glad for you that you are able to build things for yourself from the profits of other builds. Your daughter is very lucky:)
Sun, 08/07/2011 - 11:28
I Love This Headboard
Can someone give me instructions on how to make a headboard like this one?
In reply to I Love This Headboard by mkkayla
Sun, 08/07/2011 - 21:22
headboard
I just used a sheet of plywood (you could also use OSB which is cheaper) figured out my measurements and shape and then cut it out with a jigsaw. The good thing about this type is that it doesn't have to be a beautiful cut because it will be covered up. You will then need to pre drill your holes figuring out what type of design and where your buttons will be.
I used two layers of batting as my foam layer. Professionals use a thick layer of foam and spray adhesive it to the board. This could be VERY expensive depending on density and size. I had a friend tell me she used a couple of those waffle bed pads back to back (so the flat side is out) That would be cheaper and still give you some good tufted look. My buttons didn't end up indenting very much because I only used batting.
Then you cover foam with batting and then fabric and staple it all to the back of the board. Make sure to pull tight as you go and keep checking that your fabric looks good. Then you use thick thread or string or twine to thread through the back, through all the layers, through the button holes and then back through. You will need an anchor of some sort on the back to keep the thread pulled tight against the back of the board. You could use a nail, a dowel, or I just used another button because I had a bunch. You then pull as tight as you can and knot.
And then do it LOTS more times! Fairly easy but a little time consuming, but SO worth it. I used regular buttons and then hot glued big rhinestones onto them for a sophisticated bling!
Sun, 08/14/2011 - 19:10
I have been working on bunk
I have been working on bunk beds for my girls for over a year now. I should be done soon. I can totally relate to the money being tight. :) Beautiful bed
Tue, 04/17/2012 - 07:48
If nothing else, you are
If nothing else, you are certainly RICH in talent:) You did a wonderful, inspiring job, and you are teaching your daughter to be independent and resourceful. I am giving you a virtual pat on the back!
Sun, 01/06/2013 - 06:12
Hi! I'm so happy I found this
Hi! I'm so happy I found this because I'm in live with your design! I loved Ana's too but I didnt likehow the three benches came together and there was the block of wood on the side. Anyways, could you tell me what sized bed these dimensions are for!? It looks like a queen to me but I'd hate to second guess myself.
In reply to Hi! I'm so happy I found this by shwalton (not verified)
Sun, 01/06/2013 - 13:21
The bed pictured on here is a
The bed pictured on here is a full size mattress. However, I have since put a queen size mattress on this same frame. It still fits pretty well. I did have to pull the mattress away from the headboard, but I had never attached mine, and since I have the little curtains hanging on the sides it hides the difference well. A queen is 6 inches wider and 5 inches longer if you want to add in the difference when you build.
Wed, 09/18/2013 - 21:07
cut list
Hi! I just went and bought all of the lumber and had the cuts made at Home Depot but when I got home to assemble I had some areas of confusion...
1. I thought I might be short one 1/2 plywood cut to 12" x 78" as the list only called for one but I thought these were being used as the back to the two side cabinets
2. Do two of the four 3/4 plywood boards cut to 11.5" x 78" need to be cut to 76.5" to be used as the bottom shelf of the cabinet?
Thanks!
Fri, 09/20/2013 - 13:49
you are right.
Yes two of the plywood cuts are to 76.5". They actually sit inside the side legs of the cabinet space. Look again at the cut list pictures on here and it will show better. THANKS. good luck
Kid-Sized Adirondack End Table
![](/sites/default/files/100_3063.jpg)
I made this little Adirondack end table and chairs set for my niece and nephew. I made the end table following the Adirondack Stool or End Table plan. I made the chairs using the pattern found in Ana's book.
![](/sites/default/files/1_61.jpg)
![](/sites/default/files/5_16.jpg)
Modern Bedside Table
![](/sites/default/files/david.jpg)
Here’s my Brag photo! This is the bedside table made from 2 x 4 and 2 x 6 lumber from your plan list.
by David
Twin Farmhouse Beds
![](/sites/default/files/Twin%20Farmhouse%20bed%20edit.jpg)
Finally Finished! We needed to put two girls in the same room, so we could make room for a baby. The beds I found in furniture stores were either affordable with good reason (poor quality!) or expensive with good reason (solid wood). So this was the alternative. I eliminated the box spring and elevated the platform 15 inches high, so there is tons of storage space under those beds! Another builder found this fabulous bed hardware, which I used and definately recommend: http://www.rockler.com/product.cfm?page=11
It allows you to assemble and dissemble the bed quickly without a screwdriver, which is great if your in the military! One word of caution though, in the original furniture plans, the cleats attach to the inside of the bedposts. If you use the rockler bed hardware, the cleats will attach to (roughly) the middle of the bed posts. So in order to have your mattress platform be the proper width (not too wide), you need to use a table saw and trim 3/4 an inch off the width of each of the panels for the headboard and footboard prior to assemly.
Comments
Wed, 06/22/2011 - 10:58
Beautiful!
They turned out SO good! Our girls LOVE sharing their room in their special beds. The bedding you have on the beds is super cute too!
Wed, 06/22/2011 - 14:15
hardware
These turned out beautiful! I love the crisp white! (just like i did my queen size one!)
but THANK YOU SO MUCH for posting the hardware information!! i am not 100% thrilled with how i assembled the side rails onto the head/foot boards, and i just ordered this hardware to re-do the siderails! awesome! thanks!
Triple Truss Coffee Table with wheels
![](/sites/default/files/3154831609_1375500954.jpg)
I love my new coffee table!! It was so hard to decide which to make, Ana-white has so many plans to choose from. I chose this one because it looked sturdy and rustic. I wasn't looking for anything to fancy since my kids and a husband like to put their feet, food, drinks, and projects on everything... this was perfect. I thought the plans were very simple to follow. I used a clear satin finish verses the gloss and I really liked how it turned out. Still cleans well too. This was a fun, easy, and affordable project that made a great addition to my living room :)
Dark Walnut
Clear Satin Finish
Reclaimed Mahogany Farmhouse Table
![](/sites/default/files/image_45.jpeg)
My brother in law recovered some mahogany boards from a job site so i jumped on the opportunity to use some real quality lumber in a project. Using the Triple Pedestal Farmhouse Table plans as a guide i built this 500lbs beauty. Boards are joined with biscuits, legs are glue joined and 4x4. legs are bolted to table top with 3/8-16 bolts and nut inserts. 6 inch black steel 5/8 11 bolts and nuts were used to hold the cross beam.
I decided to use tung oil on this dense wood with no stain at all.
The whole project took about 2 months working weekends. If you have any questions about the project you can contact me at [email protected]. I am going to sell it since i dont have a need for it or the room.
![](/sites/default/files/image_47.jpeg)
![](/sites/default/files/image_49.jpeg)
![](/sites/default/files/image_51.jpeg)
![](/sites/default/files/image_52.jpeg)
![](/sites/default/files/image_50.jpeg)
Coffee table
![](/sites/default/files/1AABA6B7-F6C4-4E2F-92AE-7B777B08CE35.jpeg)
Coffee table made from rustic x coffee table plans.
I love how it turned out!
This was my second project since college 8 years ago and I am so pleased how well it turned out.
My son really wants a bunk bed so I promised him I would make the simple twin bed to complete the set. Eventually that is...May also make a trundle too.
Thanks!
Minwax-Polyurethane-Semi Gloss
Modified PATIO TABLE WITH BUILT-IN BEER/WINE COOLERS
This build was our first one. I completed all the cutting and putt together while my better half completed all the staining and weather treating.
I loved the plan of the cooler table, while looking at that one i saw a modified version that was longer and had 4x4 for legs...
i choose that design due to the weight of the table and figured 2x4s just wouldn't be sturdy enough for the extra length my girl friend wanted.
![](/sites/default/files/3154831710_1375671202.jpg)
![](/sites/default/files/3154831713_1375671202.jpg)
![](/sites/default/files/3154831706_1375671202.jpg)
![](/sites/default/files/3154831712_1375671202.jpg)
weather coat: clear coat
Comments
Tue, 06/10/2014 - 10:37
Cost and source of table plans
Hello! Came across your cool website looking to make a similar table. Do you have the original source from which you had found plans or have the plans yourself and can you recall the approximate cost for this project?
Thank yoU!
Pottery Barn DIY Plank Shelf
![](/sites/default/files/image1_3.jpeg)
I built this Pottery Barn inspired planked wood shelf for my Wife's first Mother's Day. using several 1, 2, and 3 by 1s. I started by making the frame and then cutting boards to fill in the gaps. Once I had all of the puzzle pieces in place I drilled pocket holes on the back of the larger pieces to provide support to the shelves so it can hold a load (wine bottles, clocks etc.) Then I finished each individual piece and placed it in its correct location. Using several clamps to glue the smaller pieces together. Finally I hung the shelf in our dining room using a french cleat (Hobby Lobby $6 or $7).
![](/sites/default/files/image3_1.jpeg)
![](/sites/default/files/image5_4.jpeg)
Comments
Tue, 08/25/2015 - 12:29
Sweet Gift!
The shelf looks great and will be treasured for many years to come I'm sure!