Farmhouse Table & Rustic X-benches
![](/sites/default/files/12734064_1041989215821871_2368271494991678087_n.jpg)
Used plans from Ana White's Farmhouse Table plans and made the table a bit smaller to fit the space available in the kitchen. Used Ana's Rustic X-bench plans for the seating.
Project total of about $200
Used plans from Ana White's Farmhouse Table plans and made the table a bit smaller to fit the space available in the kitchen. Used Ana's Rustic X-bench plans for the seating.
We're building a new house. Instead of paying hundreds to thousands on a Pottery Barn vanity I built this one! I love how it turned out!
Tue, 01/12/2021 - 09:51
We are remodeling our small bathroom. I really like what you built? Would you share any plans you have in how you made it?
After a laundry area refresh, I was looking for a slim utility cart to fit between the washer and dryer. I couldn't find anything that fit the space appropriately, so after finding the Easiest Industrial Cart plan, I decided to make one for my space. I built it using a 2x6x10 board and aluminum angle.
Tue, 05/30/2023 - 16:16
This is so great, love the simplicity and look!
I modified the plans to make the top even with the counter, and added a cutting board to the top. The cutting board top is great for cutting veggies, then scooping the scraps right into the can. I also opted for the bead board instead of the raised panel on the door, and finished the door with quarter round to give it a more finished look. Finally I used trim on the base; I had to rip the trim to width to fit my 1x3 on the bottom.
Tue, 02/21/2012 - 16:45
Wow. I'm a little late, but this is the nicest trash cabinet I've ever seen. Nice work!
I built this apothecary style coffee table with a few modifications. I wanted the drawer to actually be attached to the table itself, so I attached two 1x3s (one on the front and one on the back) from the bottom inside of one side to the other, if that makes sense. I also attached a 1x3 to the bottom inside of each side vertically between the other added 1x3s for extra drawer support. I used my kreg jig for all of this. I then added drawer slides. I attached the casters to the new added bottom frame where the vertical and horizontal 2x3s meet and viola...an apothecary coffee table with a sliding drawer. I also added a planked back using some extra 1x4s I had in the shop. I wish I had taken a picture of the back, but I forgot! I am horrible at remembering to photograph all my projects, and this table has since gone on to be with a happy home!
Loved this and after some searching for husky legs, I ended up using fence post from Lowes. They were fat and just perfect as the leg options in town were so thin and weak looking.
100% Cedar construction. Cost around $350 all inclusive. Took me close to 20 hours of work in my garage. The wife loves it. And we brag about it all the time. So I figured this contest is perfect 👌😊.
Wed, 06/10/2020 - 11:16
Is there any plans available for this design? I would love to build one of these tables.
This was an Ana White plan. My first outside project. Late husband left me with lots of tools so decided I’d teach myself woodworking. Thanks Ana White for the super easy plans. I tweaked them a little especially the outside look. I put a single fold down door for the pullout tray. Put a hinged ladder for easy clean out attached to clean out tray.
Mon, 06/05/2023 - 07:49
Thank you for sharing, I'm sorry for your loss and happy you were able to pick up your late husbands tools and build.
My brother built my bed by not following my directives but I love it anyways. We(he) made some changes for a look I wanted and it only took a day to build. The sanding and painting took the longest. My son liked it so much he built a queen size for his girlfriend. His first build. His is the black one.
Sat, 01/21/2012 - 06:08
Wow! That is awesome! How cool to tell people when they ask about your bed. A year ago, I would've never thought of making my own bed, now all I want to do is build a house and all the furniture in it! I absolutely love your bed, and actually bought one very similar. Wish I would've seen this first :)
Tue, 06/26/2012 - 16:20
Is the black one painted or stained? I can't really tell on my old school iPod lol thanks
This is my second big project. Our home is rather small and my wife was in desperate need of a pantry. I was worried how well I could do with making everything square. I used 3/4” birch plywood for the case and shelves. The shelves are permanently attached with Kreg screws and glue. I used a HVLP gun I purchased from Harbor Freight to spray on the primer. I was really impressed with its performance…especially since I had never used one..lol. I painted the interior of the top doors with Valspar chalkboard paint and it works great. My wife chose to use colors that would match the existing colors of the kitchen. Had a lot of fun with this one.
Mon, 09/21/2015 - 21:35
Wow! It turned out great! Nice work! We would love to do a project like this! Would you provide any information on dimensions/plans that you followed to give us a jumping off point to planning our own pantry? Again, love the design!
Very simple to make and looks very nice.
Wed, 11/11/2020 - 08:38
This was a fun, easy project. I built two of them. The pickets that I used were 3-1/3” wide. I used five per panel resulting in an 18” (vs. 17”) wide panel.
For those who have difficulty sourcing cedar locally, check out this link for a fence panel kit sold by Home Depot: https://www.homedepot.com/p/Outdoor-Essentials-3-1-2-ft-x-8-ft-Western-…
~$80 with free delivery. Just enough for two planters. I ripped one of the 2x4s down to make two 2x2s for the legs. The other 2x2 I ripped down to make more 1x4s. Since these ended up being 1/4” wider than the pickets in the kit, I used them as the bottom cross pieces on the panels.
They look great and my spouse loves them!
My first build
Wed, 10/02/2019 - 16:20
Wow!!! What an awesome first build! Thank you for sharing photos!
Wed, 10/02/2019 - 18:18
Your first build looks great!! What stain did you use? Love it too! Thanks
I made this toy box for a couple that I worked with. They like it so much, that they asked me to make them two more
The Farmhouse bedside tables I made for my bedroom.
Attempted this plan, but I used 2x12 boards and made it 5ft long for my wife's coffee station.
Thu, 10/03/2019 - 12:07
This is awesome!!! I love the wider width, it really works with the 1x12!
Thank you, Ana, for providing such great plans and video so I could accomplish the mailbox planter. It took me a lot longer than it did you, but I got it done! Had a hard time finding cedar pickets in my area, but ended up using the dog-eared ones as that's all I could get. Keep up the phenomenal content on your site...it is very much appreciated!
Thu, 06/15/2023 - 14:29
Love the idea of using this plan for a mailbox planter, well done! Thank you for sharing.
I wanted a prettier way to store my kids toys in the family room, but was having a hard time finding something with the right dimensions. I modified Grace's Bookshelf to fit my space needs. This is my first furniture build, so it's not perfect. I needed a lot of wood filler and it took forever to get the right finish. But I'm happy with the end product and am inspired to build more!
These chairs turned out great. I have five grandchildren and made one for each. To cut down on arguments, I painted them all the same color and painted their names on their chair. This is a really sturdy chair they will enjoy for years!. Thank you, Ana, for the great plan in your book, "The Handbuilt Home."
Custom length Parson Tower Desk.
This was great easy project I could do for my wife while she was at work and surprise her before she came home. I use the same color recommended stain but added the valspar white glaze to makenit more gray and weathered look. Sealed with a matte finish.
Fri, 10/04/2019 - 14:44
Awesome!!! Love how you made it the perfect size too!