Community Brag Posts

I started with the doll farmhouse bed. Someone made a super cute version as a dog bed- and I loved it as a mini sofa...

This is the very first project of mine !! 

Farmhouse style doll beds modified width one less slat.

When I first saw this project I thought it might make a great looking table for our dining room - however after seemingly endless frustration with the 2x10s (and also 2x4s I tried after giving up on the 2x10s) badly warping I eventually gave up and bought a couple of pre-glued pine board panels to use as the table top. I had my heart set on a nice flat dining table and the construction boards just weren't working for that. The base was still made from basic pine 2x4s as per the original plan however.
I shortened the table by about 2 feet so it would actually fit in our dining room, removed the inner angled boards because getting the angles right after shortening the table was being a pain, and added a couple of support boards that run lengthwise under the table top since it's thinner than originally planned.
This project seriously took me about 2 years to make, between all of the re-starts and so on.
Tools used include circular saw, belt sander, orbital sander, router, power drill with pocket hole jig.
Not counting wasted materials, this project probably cost me about $120 between the lumber, the hardware,the stain, the finish, etc.
After all that work and hair-pulling though, in the end my wife says she loves it, so I guess that's all that matters :)

250$  I didn't use pocket screws because I wanted the wood to be able to expand and contract as it should. I used biscuits. All Home Depot pine. Distressed. Belt sanded. Orbital sanded. Upgraded "feet" trim out of 1x3. Made the brackets to secure the top to the bottom with a table saw. Grooves cut with biscuit joiner. This was a gift and I wanted it to be perfect. Total of about 32 hours. Could've done the original plans in 15-20. 

Our family uses the dining table for homework and work with laptops. I have drawers in a window seat, so I added the stick on dividers to create laptop storage in the drawer.  This was super quick and easy.

I used ripped 1/2” thick plywood pieces.

loved the results!  So easy and exactly what I needed!

Finally completed my Farmhouse table and bench today and couldn't wait to post pics (brag). Many, many thanks to Ana for sharing her talents with us. I am thoroughly enjoying my new hobby.

Needed something to help my daughter keep track of all her jewelry and especially earrings. This plan seemed to fit.

I decided to use small wooden dowels on one section and angled one for rings. For the doors I used metal window screening and stapled it on.

We live in Los Cabos, Mexico, and the sun is hot and bright! My kids love playing outside in our backyard, but we had no shade. I started looking around, found this site, and though I have few tools and only helping experience with carpentry, decided to give it a go. It's a big hit with the kids and they assure me that it's a nice shady place in the yard! No sand added as we have plenty of dirt and cactus as it is. Tools used: a hand saw (!) and a drill. I really enjoyed it, so I need to go buy a circular saw soon.

I did this bed today in just a few hours. I am new to this site and have lots of project to be posted. I thank my wife for the lovely display. I am stationed in the Navy overseas and good furniture is hard to come by. The Euro makes stuff expensive and the military store carries lots of expensive "cheap" stuff. I started with a picnic table for the kids this past summer and my Facebook went out of control with request to build stuff. So, I do a lot of look a likes. I get to build things and my fellow service members get nice furniture for the cost of wood.(I get a little for me too). I hope you enjoy my projects because there are many more to come. If you want plans just ask I keep them in my head and can type them down and email them to you. Thanks Ana White for the great ideas! Happy New Year everyone.

This was a super easy project and I like the way it turned out. I just got a 1x6 board in pine (that cost about $3.50) sanded it, stained it and marked all the inches with a pencil. I then used a painter's pen in black along with my square to get all the lines straight. Then I used some stencils to do the numbers - also with the painter's pen. The whole project took probably an hour to do (besides waiting for the stain to dry).

So I followed the plan except I tried to use more pocket hole screws. I managed to use them for all parts except the seat and back. Looking at them I see how I can use them for those areas too ( just a little pre planning next time)
I’m using Behr Wedgwood waterproofing stain and sealer to complete the project.
I love all your plans and can’t wait for my next project.

Made this for my son's playroom. I added the cross supports in the base to make a sturdier chair.

Really simple edition to make this project portable and efficient for group functions. Add some legs lol. Measure the height you want from your kitchen seat, cut, and screw to the bottom. The pictures should help with how to place them.

Hope you like it

I started the project on a day off and finished it over a few long nights in the garage after work. It turned out pretty nice. I ommitted the middle legs, shortened it from the original plan to 65" long, and made it 31.5" tall. I also added breadboard style ends to the top to show less end grain. It is shown with a 55" TV on top of it for perspective.