Community Brag Posts

Great project and fun to do. I've actually made 6 tables off this same plan, all different sizes,from 4ft. To 8ft.. 

I made a few changes to the Farmhouse Bench plans as I wanted to match the design of the table. Most notably, I lengthened the seat boards to replace the breadboard end caps. This made my total length 67″, the perfect size to fit under the table if needed. The width was changed to 15″ and the height remained 18″.

We haven't had bed frame since we moved from Florida and as we now have our own home, it was time to get one. My friend gave me headboard they had no use, so I just had to build rest of a frame.
Notice that we are middle of the hole house renovation so we have no trims, walls are lacking paint etc :) I still need to make night stands and closet for us :) Let see how they come out.

Follow our projects and life middle of the mountains in my blog :)

http://ourleaningtree.wordpress.com/diy/bed-frame/

This project took me a little longer to finish but I'm happy with the results.  I used the plans to establish the size and carcass, but changed up the style on the inside by putting a shelf on one side and drawers and glass/wine holders on the other.  For wood I used 3/4" Maple plywood and common board pine.  The color is minwax Jacobean and for protection I applied wipe on poly satin finish.  This gave it a nice hand rub look.

I fell in love with Ana's plan for this vintage step stool. I made three, but one has already gone to a new home (my sister's house). I used all scraps, I didn't have 1x8 for the treads, so I slatted two 1x4s. Then behind my husbands pile of scrap wood in the shop I found two planks of 1x8 oak!!!! I made the second two stools with the oak for the tread, but didn't want to cover it with paint, so I stained the top treads. This also was my first build using a kreg jig, I borrowed my sister's 'kreg jig jr.' It made the assembly so simple and quick! These have been so nice to have around the house for the kids washing and brushing and helping in the kitchen!

I loved the original one posted and it inspired me to create our own version. It's getting great reviews !

So appreciative for the plans. This was one of the bigger projects I've taken on but I had so much fun with it. A client of mine actually sent these plans to me because she wanted this exact bed with headboard. I was a little apprehensive at first because I haven't normally done a lot of custom work but it was a lot of fun. 

I followed the plans except for the top, I used a 2x12, 2x4 and 2x12 pocket holes together.

Burnt the wood with a torch and stained over.

Thanks for the plans!

Questions? [email protected]

I saw this bed and just had to have it for my daughter. She loves it so much and it looks great in her room. It was easy to make, but very heavy. We were very meticulous to hang, we might have spent more time hanging it than building it :) There is more info on my blog.

I needed to use my small coat closet more efficiently (observe the disaster in the before picture!), so I installed built-in shelves along a side wall for all our board games. Not a plan really, but just a simple solution. Measure the height you want your shelves to be, install a 1X3 at that height on either side wall, making sure they are level and secured to studs or anchored (Mine are 1 foot apart up to 5 feet). Then install plywood or solid wood shelves across the supports. Screw in to secure and you've got functional, inexpensive shelving, built to fit your unique space.

Our version of the Brandy Storage Bed in king size.  Added a headboard made from from weathered wood leftover from building our house.  The "scrap wood" pieces used to cover the bottom are a mixture of rough cedar, old wood from a grain bin and general 1X scraps.

Thanks so much for the plans Ana, we love our new bed!! 

Fell in love with this table! Couldn't wait to build it. Found a great mill that had raw stock of a variety of woods. I chose White Ash  because if the hardness and beautiful grain. They planed it to 1-3/4" thickness. Modifed the width to 50" and turned the truss supports underneath to add extra support for the table top due to the weight of the White Ash. Finished with provincial stain and 6 coats of hand rubbed poly. Used wood bleach on the 4x4's to take the red tint out before staining. Worked great!

My sister needed an extra tall stool for the bar her husband built, so I adjusted the Parson Chair plans to make them fit. I included the Sketchup model that I used in my blog post.

I have been looking at sewing furniture for years, but the prices always made my jaw drop. I have a small craft room, so I needed a table that could also triple as a cutting table and fabric storage. Thank you so much to Ana White for this plan! I built exactly to the plan in The Handbuilt Home, and it's the PERFECT size.

So the sewing machine can sit flush with the top, making working on big sewing projects way easier, I traced the outline of my machine on the MDF and cut it out with a jig saw. Then I built a small shelf using a 1x12 scrap and 2 1x3 scraps. Putting the 1x3s on top of the 1x12 made the shelf 3.75 inches deep, which is exactly the depth I needed. I attached it to the underside of the tabetop using a pockethole jig and screws.

I built 2 boxes using 1/4 inch plywood, and installed drawer pulls on them, giving the illusion that the table has 2 drawers built in. This is where I keep my ugly stuff--interfacing and fabric scraps.

I got the color scheme for the table from the entryway console plan in The Handbuilt Home. In order to make the MDF top look like it had a wood grain, I applied mahogany gel stain with an old washcloth in very thick strokes that spanned the length of the tabletop. It soaked in and lost the "grain" look in some places, but the majority still looks like wood. I did have to apply several coats of polyurathane over the stain; the MDF has a prickly texture that grabs fabric and makes it hard to feed through the sewing machine.

My only complaint is that I didn't quite think through the fact that seating is bar height and I'm 5'7". It's a little difficult to reach my sewing machine pedal. I may build a small stool for the pedal to sit on so I don't have to half sit/stand to sew.

This is the first woodworking project I've done alone from start to finish: from going to Lowe's and picking out the wood, to cutting the wood with a circular saw, assembly, and finishing. (My fiance did carry it up the stairs for me. :) )

I'm so in love with this table! And now to finish the quilt I started 6 months ago....

I made this Christmas tree shelf using the plans here.

I modified it by adding on two shelves so that it could accommodate the 6 hooks I needed for my family's stockings.  I also hot glued a string of lights to the perimeter.  This is serving as our Christmas tree due to space constraints, so I wanted it to be "fancier" and more like an actual tree.

I think I did ok for my first real build and my family seems to really like it.

I used the basic plan as described on the website. I did differ on the tabletop and the legs. I used 3 slabs of 300+ year old cypress grown and milled locally here in Mississippi. I also kept the live edge on the outside boards. I bought my legs from 59Design. They were identical in everyway but about $15 cheaper per leg. :)