Community Brag Posts

I used the plans from the Camp Loft bed and adjusted to exactly what I needed. Two twin beds in a small bedroom without losing any floor space. I found the slide on craigslist while I was building this and it made the best addition. I also added a shelf along the base of one bed for the boys to have a play table and adds stability to the base of the bed to keep it from rocking.

After building the iTable coffee table, I decided the move on to building some end tables. I do wish I had modified the plan so that they weren't quite so wide, but I absolutely love them . I used Hillary's oxidized finish with the steel wool/vinegar solution about 4 days old, and I brewed 12 bags to 32 oz. of water for the black tea.

I just finished off the tables with Minwax Finishing Paste Wax, as it's a little bit more readily available than the items Hillary used. The wax really warmed the wood up; I was debated mixing in some Minwax Wood Stain with the wax because the raw oxidized finish was so gray, but just the clear wax did what I was looking for.

I built this for my grandson for his 2nd birthday to go along with the new race car bed that he got.  I left off the pump handle and hose as a safety precaution since he is only 2 and a handful.  This was definitely the gift that everyone was talking about!  I love your plans Ana...keep 'em coming!!!

1st time making an actual table that I can use. Its rough but still pleased. Just needs a coat of poly 😊

My very first build inspired by the Ana-White.com website. I would declare this as a success. Decided to make two laundry drawers and keep the bottom open for extra supplies. Perfect for our household.

This creation was made using scrap wood, hooks I got from Bunnings and some blackboard paint. Apparently now Brodie doesn't know where the keys are. This was based on Ana White's Craftsman Frame Plan.

I am not sure what happened first time I posted this as it was posted as Guest (sorry). Anyway....

When my daughter was born I promised that I would make her a dollhouse. A few weeks ago I found these plans, and absolutely loved the visual layout of the rooms. I stuck with this layout and tweeked the dimensions according to what worked best for the space it would proudly sit in. It is 46 inches high and 31 inches wide at the walls, and is made from 12 inch wide MDF which I primed with a latex primer and then finished off with a semi-gloss white on the majority of the walls. I also mixed the colors for the roof and also the 3 accent walls to give it an extra wee shot of color. 
I was very, very happy with the end result, and having caught what I now know as the "dollhouse bug" I thought "what about if I added a chimney ?". So I added it. I then though what about adding a roof ridge and gable to the roof. The house looked even better. Progressing onto full-blown "dollhouse-flu",  I then decided to make a chair for what would later be the living room. That was it, fully addicted now I couldn't stop and found myself obsessively planning, designing, messing up, re-designing, cutting, building and painting until I reached the point where last night I attended my first "DA" meeting. 
I found Dollhouse Annonymous very helpful and although not cured, I realise that it is perfectly acceptable for a 44 year old Scotsman to build a dollhouse for the daughter (naughty 2 1/2 year old daughter) that is the love of his life. If she is happy when she unwraps it on Christmas morning, then all of the work shall be worth it. 
This site is top of my bookmark list and I love it. !

I adjusted the dimensions to fit my space and added a shelf on the bottom. I built it using my Kreg Jig.

I love this bin so much I built a large one and a small one. The small one is for the bathroom. The large on is for the kitchen. This is actually a rather easy build. I used mdf. I grooved the front panel on the large bin to add character. This was built from Ana White's Wood Tilt Out Trash or Recycling Cabinet Plan.

Made for my grand daughter.  It was too cold in the shop to use carpenters glue, so I used medium thick, gap filling CA (cyanoacrylate)glue, and brad nails instead of screws.

I still have to apply a finish, but here's Ana's bar cart. My woodworking class project!

For the 7 years I have been married to my lovely wife we have used an old 70's bedside table and some Rubbermaid boxes as our nightstands. It was time to give my wife a nightstand that she would love. With the help of the Kreg Jig, a new table saw and some trials and tribulations in staining, I have given her a special treat. Best part: She loves them!

Second Ana White build!

I built this table for my wife for Christmas.

I made this coffee table with some old barn doors. Saved money and added so much character to this piece! I love Ana White designs! - 

Inspired by the Fancy X Table plans, this table was made from scraps of thresholds and door frames. The table legs were made from the runners and deck board from shipping pallets.

The Vintner's Hutch was created by re-purposing fencing for the wine rack, decking for the buffet top & pallets for the buffet itself.

The little guy featured in the additional pics is a twin to another accent table. All three tables can now be joined to make one 12' long table for the ultimate family feast. Magnets are used to make the connections!

It is an honor to post these on the Brag Board since I was inspired by the old "Knock-off Wood" to start building furniture 18 months ago as a way to bring in income and help pay for my wife's MS medicine. A humble and sincere "thank you, Anna" for reminding me that , even if I can't do much, I will never be accused of not doing what I can. You've inspired me to stop feeling sorry for myself when money was tight and collectors were calling. Now I proudly own Chucked Wood; where old pallets go to live!

Here's to life...

Cheers!

Cory
www.facebook.com/chuckedwood/

This was my first handmade diy furniture project ever.  It turned out much better than I anticipated.  The lumber store that I used did not offer knotty pine in 2x6 dimensions so I improvised with 2x4s.  This project was a little time consuming due to the fact that I am a complete novice and I had to gather all of the necessary tools and learn how to use them.  Everything considered I am very happy with the result and I really enjoyed this project.