Community Brag Posts

I meant this cupboard to be more like Patrick's Jelly Cupboard...but my infernal "let's customize everything!" attitude morphed her into what she now is. The open bottom shelf is exactly sized to hold glass milk bottles awaiting return to our local dairy (I am SO lucky!), the bottom shelf behind the doors is large enough for sidewalk salt and potting soil, and the upper shelf behind the doors holds bug spray, spray paint, and odds and ends. The top shelves hold baskets...one for library books and store returns, one for things that need to go farther (like to our relatives), and one just for looks. I guess.

The bottom construction is entirely plywood. The face trim is 1x2 pine, the footer is a 1x6 poplar board, and the top of the construction (including the short support legs for those shelves) is poplar (from a garage sale - I saw it back there, asked a price, and walked away with a $5 board of poplar at 1x12@10' - it never hurts to ask!). The doors are cedar (leftovers from the bench construction to the left) with hardware cloth we had on hand from garden projects.

The body is painted in an off-the-shelf Behr white, and the doors are unfinished cedar, inset with a magnet closure at the top center. All the other hardware came from garage sales. If you can see them, there are a couple of cross supports at the back of the piece...they are discarded hardwood floor boards, stripped, sanded, and tung oiled.

I absolutely love my mudroom now! It looks like I spent a fortune getting this tailored, custom look, when all I really had to spend was about $70 total (including bench, coat rack, AND cupboard), plus some creative juices and elbow grease! I keep walking back in there to just stand and glow over it...

Here is my spin on the Farmhouse bed.  I made the entire thing 8 inches taller, added a couple random pieces here and there, and stained it dark walnut.  I also modified the plans to use a box spring and bed rail fasteners to make it easier to take apart.

Yesterday I built two of these for my wife and I's room, we just moved from Hawaii to Arizona. The plans were clear and simple, and the end product turned out awesome. Next I will tack the dresser/tv stand. Thank you Ana

I have been holding a really cool farm pallet in the garage for 3 weeks.  I finally decided to use one of the slats with the 2x4 supports to make this bench.  Only 7.97 for a box of screws!

The main difference is my cart is the width of the  shelves. My wife wanted something wider than a 2x12 so I combined (2) 2x8's with pocket hole screws. This is my first real build and I was surprised at how strong the shelves are with just pocket hole screws!  I also made the cart counter height as she will be using it in the kitchen. 

Rustic table plans with slight modification of the width and the legs were mounted differently for a little added flair. So many finishes to choose from....

I followed the Emersen Console plans, but with a few changes. The biggest in that I went with sliding doors because I didn't want the doors to open into the living room. This meant having the doors run between the face trim and a guide I tacked into the inside. I also adjusted all of the measurements to fit what I was planning on stuffing into it. I drilled a 3 inch hole in the bottom for all of the cords to run to the power bar and left a gap between the shelves and the back. I kept the wood light to contrast with my floor and painted the doors blue for a mid-century modern-ish feel.

Kids love it

So after I built the one for my son, my daughter was very jealous.... now she is more jazzed than my son to have hers....

This was my first DIY building project.  I wanted a counter-height table, so I searched websites looking for plans and eventually I found ana-white.com.  I altered the plans a little and I added a farmhouse style table top.  I used 2x8s for the table top which makes the table very heavy.

Second time building this table. Made it smaller, cutting support pieces to 45 rather than 60. Also tried 1X10 for the top.

This closet tower is from the Craft Room Storage Tower plan, and made mostly with left overs from other projects. I wanted a shallow tower storage just deep enough to hang pants and slacks in, and to use a 12" wide door I already had in my garage. At Target I found some kid-size hangers that were just the right size - about 12" wide. Trouser hangers are about this same width, but they weren't available in-store so I went with what they had. The only things I bought for this project are the knob, hinges, some 1x2's, and the hangers. The sides are from a lengthwise half-sheet of C/D plywood, ripped down to 12" strips on the table saw, with 1x2 edge joined at the back to create a "toe kick" to clear the baseboard. The front is trimmed out in 1x2 with a scrap of 1x3 to trim the top. The removable closet poles are from a flagpole, and the ends are held in place with some 1/2" craft boards. The back is 1/4" plywood. The longest part of this project was the sanding, because the plywood wasn't the pretty kind - used lots of wood filler on the knots and as a grain filler, then sanded it a lot. This project took about 9 hrs total, (sanding took the longest), construction with the Kreg jig and nailgun was very quick, and then paint and adding the door and poles. The removable shelf was added as an afterthought and is a scrap of plywood, with some S4S to hold it up, and a 12" scrap of moulding across the front of the shelf. It is 82" tall, 13 1/2" wide, and 14 1/4" deep. It's a perfect pair with the 6-cube tower that I built from Ana's cube tower plans a couple of years ago.

Tablesaw, router, fliptop mitersaw, and dust collection workbench.