6 Drawer Library Coffee Table

Submitted by Ana White on Wed, 10/03/2012 - 10:28
Difficulty
Advanced
| Print this plan

Build your own coffee table inspired by Pottery Barn Library Flat File Coffee Table! Featuring six drawers and a large square shape, this rolling coffee table will store all of your magazines and books and look great too! Free plans from Ana-White.com.

Thank you Ashley!!! Did you stop over and check out Ashley's building post? Just click here to get more details on this coffee table build and finish!

Hi everyone!

I cannot wait to meet you on the book tour! After your amazing response, the kind folks over at The Home Depot who are hosting the events - already featuring lots of awesome giveaways - announced that they will be giving away my book for FREE with a $20 purchase while supplies last! Yes, you heard that right!

In case you missed it, here's the Book Tour Schedule.

And speaking of free, of course we got you covered with more free furniture plans right here!

Today, I am sooo excited about this plan. You already know Ashley from Shanty2Chic, a dear friend from way back to the beginning of this blog, who is also part of the book. Well, Ashley and I are up to our same old tricks!

How to DIY furniture and save tons of money, and get exactly what we want. That's the name of our game! Latest DIY project?

This amazing six drawer Library Coffee Table that rolls and stores it all!

From Ashley:

This coffee table is my favorite build to date! The square shape is perfect for my couch, I love the size and the drawers leave tons of storage space! Thank you so much Ana for your awesome, easy-to-follow, plans that saved me over $700!

Can you count the DIY projects in Ashley's Family Room? There's at least half a dozen!!! Go get the details on this Coffee Table build, the finish, and the scoop on the DIY projects in Ashley's room here.

And of course, we got you covered with the plans too!

Dimensions
Dimensions shown above.

Preparation

Shopping List

4 – Caster wheels
3 – 2x2 @ 8 feet long
½ sheet of ¾” plywood
4 – 1x2 @ 8 feet long
6 – 1x3 @ 8 feet long
2 – 1x4 @ 8 feet long
1 – 1x8 @ 10 feet long
1 – 1x8 @ 8 feet long
1 – sheet ¼” plywood for bottoms of drawers
6 – white euro style bottom corner mount drawer slides
Knobs or handles
1 ¼” and 2 1/2” PH screws
1 ¼” finish nails
2” wood screws for attaching top from underside of 2x2s
Wood glue

Cut List

4 – 2x2 @ 12 ¾”
4 – 2x2 @ 32”
2 – ¾” plywood @ 32” x 12 ¾”
6 – 1x2 @ 32” (these can be a tad short to conserve boards – they’ll go on the inside for the drawer slides)
4 – 2x2 @ 32”
4 – 1x2 @ 32” (these MUST be 32” or drawers won’t work out)

DRAWERS – 1” less overall than total width (CUT TO FIT YOUR PROJECT!!!!!!)
12 – 1x3 @ 16”
12 – 1x3 @ 29 ½”
6 – ¼” plywood 31” x16”
6 – 1x4 @ 31 ¾”

5 – 1x8 @ 36 ¼” (top)

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Circular Saw
Power Sander
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

First build your two ends. These are identical, and all edges are flush to outsides.

Step 2

These are for the drawer slides. Just nail and glue in place.

Step 3

Now the front and back trim. It is very important to space these pieces exactly as shown to keep distance between drawers even.

Adjust for square - this is very important.

Step 4

Build your drawer boxes to suit your openings. The drawers must be very square.

Step 5

Step 6

Then attach your drawer faces to the drawer boxes with glue and 1 1/4" finish nails. TIP: attach hardware first! Keep an even 1/8" gap on all sides of the drawer faces.

Step 7

And then the top! You can build top first and then attach - it's up to you.

Step 8

And finally add the caster wheels to the base.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Comments

Tsu Dho Nimh

Wed, 10/03/2012 - 12:06

Is that all over, or just the book tour sites on the day of the tour?

They KNOW they'll make it up in lumber sales ... a very smart PR move from them.

MichelleC

Wed, 10/03/2012 - 21:18

Two amazing plans within just a few days of eachother (buffet and now this coffee table)?!! Quit it! How am I supposed to focus on all my other projects when such awesome new ones keep coming?!

Laure Duchemin (not verified)

Thu, 10/04/2012 - 04:19

creation de site The result is beautiful, thank you for taking the time to explain every step to create these very useful drawers

Jamaunzie

Mon, 10/08/2012 - 19:02

I too am cofused with the drawer slides 1X2 and plywood 3/4 inch seems the slides would be flush with no overhang but i have been known not to see the big picture.

gibbsgirl (not verified)

Sat, 10/27/2012 - 11:37

Did you really just use plywood on the top or did you use something else? Would you recommend anything different that might be more solid?

Heather James (not verified)

Sat, 11/03/2012 - 23:21

I could seriously see making this table with 3 really large flat drawers, rather than the 6 drawers in the plans. Those drawers would be big enough that you could have a jigsaw puzzle going on one drawer, a small train layout on another, and legos on the third--AND be able to shut the drawers and have all of those "messy" things OUT of sight!