Build your own loft bed plans with stairs all from 2x4 and 2x6 lumber! This super sturdy and beautiful design features a platform for easy access, junior height loft bed plans free from Ana-White.com

Preparation
- 15 – 2x4 @ 8 feet long
- 4 – 2x6 @ 8 feet long
- 2 – 2x2 @ 8 feet long
- 1 – 1x2 @ 8 feet long
- 2 ½” pocket hole screws
- 4 – 2x4 @ 65 ½” - legs
- 2 – 2x6 @ 37 ½” -bed siderails on ends
- 5 – 2x4 @ 37 ½” - guardrails on ends
- 5 – 2x4 @ 75” - guardrails and base support
- 2 – 2x6 @ 75” - bed siderails
- 2 – 2x2 @ 75” - cleats
- 2 – 2x4 @ 30 ½” - platform
- 2 – 2x4 @ 37 ½” - platform
- 1 – 2x4 @ 41 ½” - platform
- 2 – 2x4 @ 20 ½” - platform
- 12 – 2x4 @ 22” - decking
- 2 – 2x6 @ 43” (both ends cut 45 degrees off square, ends NOT parallel) – to be trimmed down in later steps
- 6 – 1x2 @ 7 ¾” (both ends cut at 45 degrees off square)
- 6 – 2x4 @ 20 ½” - stair treads
This bed requires a slat system (1x3s, 1x4s or 2x4s or similar) or a bunkie board mattress to complete
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
Instructions
Step 1
Step 3
Now here's where we skip the glue. To make this loft bed easy to disassemble, I did not use glue here. The inside width for the mattress area should be 39", insetting the side rails 1 1/4" from outsides. I did this so your PH screws have lots of board to grab into. This bed has NOT been weight tested or guaranteed. If you feel you need extra support - add metal brackets under the 2x6s. An alternative method is to attach metal bed brackets directly to the ends if you have those. Notice the cleat is added in this step to. I used 2 1/2" screws and glue to attach, screws every 6-8" all the way down. This bed is designed to work with a bunkie board, but we just used 2x6s cut to length as the bed slats.
NOT SHOWN: Add the fifth 2x4 @ 75" at the back base of the bed to support the legs at the bottom.
Step 7
Step 8
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Comments
In reply to tools by cortesfamily
Ana White
Sat, 01/30/2016 - 16:30
Yes, this plan calls for
Yes, this plan calls for pocket holes, you will need a kreg jig. Do you
have a handsaw? A circular saw and chop saw would work great! Hope this
helps! Also, please take a look at this video
https://www.youtube.com/watch?v=2na6Qvxc5Mo and the "Getting Started" link
at the top of the website! Happy Building!
cortesfamily
Tue, 02/02/2016 - 20:21
saw type!
we have a jig saw, looks like well be getting a kreg jig! and we will take a look at the video thank you
Luciana-
Sat, 02/06/2016 - 22:29
Screws
Nice bead and plans but I am very new to making things. Do you happen to have any more detail plans on where you are placing the screws and what size screws and where you are using them on your plans ?
aschopp
Mon, 02/29/2016 - 09:42
Who did you finish the wood?
Could you let us know ho wyou finished the wood for this project? I am hoping to build it this week!
mariad444
Tue, 03/15/2016 - 21:54
Mattress size
Please please please...Does anyone know the maximum mattress thickness?? I have read everything I can find and am not able to find the answer anywhere?? Help
glamazonjayne
Thu, 03/17/2016 - 15:43
need help with attaching the steps to th platform
My husband built this bed for our daughtr, but had a difficult time understanding the instructions, aas they are quite vgue. He could not igure out how to attach the stais to the platform. Please send u DETAILED instructions on how to attach the stairs to the platform.
Mgossage
Sun, 03/20/2016 - 17:10
Modify to a full sized mattress
LOVE LOVE LOVE this!! Just one question...How would you modify this to fit a full sized mattress?
Thanks in advance!!!
Ntrisdale
Thu, 04/07/2016 - 09:15
Full size bed plan?
Hi Ana, do you have a modified version of this plan for a full size bed?
debduhadway
Tue, 04/12/2016 - 14:10
dimensions for a full size bed
What would the dimensions be for this loft bed for a full size mattress?
Thanks,
debbie
ArleneP
Wed, 05/25/2016 - 17:35
Loft for a big kid...AKA an adult
I was wondering if this plan could be sized up for a Full XL mattress?