Small Cedar Shed

Submitted by Ana White on Mon, 04/01/2019 - 21:58
Difficulty
Intermediate
| Print this plan

Build your own cedar shed to store lawn mowers, tools, trash cans, or just extra things.  We love that it's like an outdoor closet.

This cedar shed plan uses fence pickets - so it's much less expensive.  The simple design can be built by most anyone.  Step by step plans with diagrams and shopping and cut list from Ana-White.com

small shed
cedar shed inside view
cedar shed front view
hardware for shed

When I first started building projects, I didn't care if I worked in the gravel driveway on a cold day. I didn't care if I had a little spot behind the boat, on the floor in the garage to work. I was so crazy about building, I found a way around anything to work on a project.

But over the years, slowly, tool by tool, I've been working up to a dedicated work space. And boy is it nice.

It's kind of like having a sewing table. Or a potting bench for gardening. Or even a dedicated spot to make coffee in your kitchen. When you do something on a regular basis, it sure makes life easier to have a dedicated work station for it! 

So when my friend Gina from Lady Goats wrote me saying, Help, Ana, I'm building in the rocks and dirt! I had to work with her to come up with a solution.

I hope this solution we came up with works for many of you too!

small storage sheds

 

How much does this cedar shed cost to build?

Gina sent me a link to a cedar shed with a retail price of $1600.  Okay, that's more than the tools inside! 

She wanted to use cedar, and I thought, what cheaper solution than cedar fence pickets for siding?  At a couple of bucks each, Gina was able to make this shed for $255!  And it's cedar!

 inside small storage sheds

Gina is going to add a few fun things to the inside - like a miter saw cabinet and some door shelves, so stay tuned as we turn this shed into a workshop!

And here's a few notes from Gina:

  • I found it saved about $15-$20 to use this set of hinges & latch, instead of buying them individually. You'll end up with two extra latches, but I'm sure they'll come in handy elsewhere!
  • Every minute I spent on this was timed, and the entire build took almost 8 1/2 hours (including roofing, excluding finishing). So this could definitely be a weekend project! - All of the components, unassembled, take up about 12" of space! Maybe this info will come in handy for some of you! I would have definitely pre-built everything and assembled it after I got my HOA's approval if I'd have known!
  • This was my first roofing project, and this product made it SO EASY. They have videos on their website that explain everything. - The paneled doors were kind of tough to get tight. Use a pipe clamp! If you don't have one, nail one corner of an end board and squeeze the boards together while someone else nails all of 'em.
  • The roof allows you to put the shed about 8" away from a structure (meaning there's an 8" gap between the shed and other structure). If you want to lessen that gap, you'll have to resize the roof.

For lots more photos and tips, please check out Gina's blog post here.

 

Cedar Storage Shed Plans

This shed plan can be built in panels first and then assembled on site -

cedar shed panels

The free step by step plans follow.  Thanks for using our plans.  

Dimensions
small shed dimensions
Dimensions are shown above.

Preparation

Shopping List
  • 18 – 2x2 @ 8 feet long
  • 44 – 5 1/2" wide cedar fence pickets
  • 1 – 2x4 @ 8 feet or stud length
  • 4 – 1x3 @ 8 feet long
  • 8 – 1x4 @ 8 feet long
  • 1 – 4x8 sheet of plywood for attaching roofing shingles (check what your shingles manufacturer recommends)
  • 30 square feet of roofing shingles
  • Roofing nails or glue
  • Heavy duty gate hinges, Handles, Lock or Catch
Cut List

BACK WALL

  • 2 – 2x2 @ 66 1/2"
  • 5 – 2x2 @ 77”
  • 16 – 5 1/2" wide x 1/2" thick fence pickets @ 66 1/2" long

SIDE WALLS

  • 2 – 2x2 @ 35 1/2"
  • 2 – 2x2 @ 77 1/2" (longest point, top end cut at 15 degrees off square)
  • 2 – 2x2 @ 72 5/8" (longest point, top end cut at 15 degrees off square)
  • 2 – 2x2 @ 67 1/2" (shortest point, top end cut at 15 degrees off square)
  • 2 – 2x2 @ 36 7/8” (long point to short point, both ends cut at 15 degrees off square, parallel to each other)
  • 32 – 5 1/2" wide x 1/2" thick fence pickets @ 35 1/2" long
  • 2 – 1x3 @ 80 1/2"
  • 2 – 1x3 @ 70 1/4" (short point measurement, top edge beveled at 15 degrees off square)

FRONT HEADER

  • 1 – 2x4 @ 66 1/2"

ROOF

  • 2 – 1x4 @ 83”
  • 2 – 1x4 @ 46 1/2"
  • 5 – 2x2 @ 46 1/2"
  • 1 – roofing plywood @ 83” x 48”

DOORS*

  • 4 – 1x4 @ 60”
  • 4 – 1x4 @ 33”
  • 2 – 1x4 @ 26”
  • 12 – 5 1/2" wide x 1/2” thick fence pickets @ 67”

*You may wish to build doors slightly shorter to enable easier opening and closing - recommended to build doors to fit finished opening.

Tools
Tape Measure
Speed Square
Pencil
Hammer
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Circular Saw
Brad Nailer
Power Sander
Level
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

Frame you your back walls. You can use the Kreg Jig or 2 1/2" screws here.

Step 2

Starting at the bottom and working upward, attach the cedar fence pickets, overlapping 1/2" as you go up. Screw or nail and glue on.

Step 3

Frame side walls as shown in diagram as you did the back wall. You will need two side walls.

Step 4

And add the cedar siding to back wall as shown in diagram. Do not forget that the sides need to be done in mirror!

Step 5

Build the side walls and attach cedar fence pickets to the side wall.

Step 6

Once your side walls are complete, you can attach back walls. Use 2 1/2" screws or brackets for easy disassembly.

Step 7

Add header to front of shed. Take a minute here to make sure your project is square. The door area especially needs to be square.

Step 8

Frame up roof as shown above.

Step 9

And attach roof to top of storage shed.

Step 10

Add plywood and roofing to top of shed.

Step 11

Frame doors up with pocket holes. Build doors to fit your openings. I like to leave 1/8" gaps.

Step 12

Attach cedar fence pickets to back of doors.

Step 13

And then install doors to shed.

Step 14

I love how Gina added the stop block to keep doors closed. Isn't this shed beautiful!

Step 15

Don't forget the pretty hardware!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Comments

Guest (not verified)

Mon, 04/02/2012 - 09:24

Seriously. You always seem to time things perfectly for your readers' needs! Was hoping that you'd one day post more outdoor projects such as this shed. I love it! Maybe we'll be seeing outdoor kitchen islands, a outdoor washing station (especially for gardeners' veggies, convertible outdoor swing (bed/swing), different type of sheds in the near future?....a girl can only wish! THANK THANK YOU for everything that you do! You are one amazing person, Ana!!!

Sally (not verified)

Mon, 04/02/2012 - 10:20

If you think you have no intentions of moving...screw a header board to the outside wall of building at top and bottom. Then fix 2 x 4 on the sides, vertically. Now you can attach your side and roof, and save the money by not making a finished back!

Cindy from Indiana (not verified)

Mon, 04/02/2012 - 11:51

It's like you read my mind, Ana and Gina!

I was just standing outside my house yesterday afternoon trying to brainstorm some attractive but inexpensive storage. I cannot believe you posted this at exactly the right time!

Thank you - it looks great!

Guest (not verified)

Mon, 04/02/2012 - 13:33

I don't have a patio and I'm guessing this probably shouldn't go directly on the grass. Do you know what I need to do to prep the ground it will sit on?

Ana White

Mon, 04/02/2012 - 14:20

The easiest way to do a floor would be concrete pier blocks, a wood framed floor probably could get away with 2x4 joists depending on your load requirements. Foundation types vary greatly by region and soil type, so ask locally for advice. I am working on a chicken coop that will have a floor and is very similar to this design in the next bit. Thank you everyone for the comments and feedback and pins! Much appreciated!

Robohead

Mon, 04/02/2012 - 14:34

I've been looking for plans for a shed like this. And the timing couldn't be better. This is getting bumped to spot number 2 on my to-do list. This website has been so incredibly useful to me. I'm so glad I found it.

redhead_61

Mon, 04/02/2012 - 16:04

It turned out SO great. I love the look of natural woods outside. It really has helped warm up my little enclosure of cinderblock walls! This will be such an awesome spot. I LOVE the price savings as well.

debandtom25

Mon, 04/02/2012 - 17:20

I was just searching Google for some ideas for an outside trash/recycling shed, and I thought, "Why don't I check Ana's site?" I don't recall you having a shed, but I thought I would give it a try. Well, how do you do!!! The first item that pops in my face is the shed! Thank you Lady Goats! I'm off to print out the directions and then see how I can modify specifically for my needs. Will post pics when I'm done. :)

Guest (not verified)

Thu, 04/05/2012 - 14:17

Its perfect, all the basics of putting it together, now, just need to slightly modify it to fit under my window and my garbage bins.
Thanks Ana!!