Community Brag Posts

Work Bench

Submitted by vrsantana on Tue, 06/09/2020 - 16:09

I have been tinkering with a few projects for months doing most of my work on a foldout 6 foot table. Needless to say, this table was not the ideal work space or level surface for that matter. Decided to go ahead and make myself this work bench. I opted to use MDF rather than plywood for my top. All the plans were right on and everything came together without a hitch. The bench height is perfect and my back is thankful for it. Thank you and keep up the great work, Ana.

Estimated Cost
$65
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None
Recommended Skill Level
Beginner

X Bench...with a small twist!

Submitted by RyAngel on Sun, 08/05/2012 - 19:04

We just absolutely LOVE this little bench! Ryan found Ana's site while searching woodworking tips and thought this bench would be a great replacement for the dinning room chairs that were falling apart. It was a great idea!

We have an Etsy shop and create and sell lots of stuff! We loved the bench so much that we thought why not put a few twists to it and see what our customers think. Well they LOVE it too! Of course everyone wants this color and that size, but the core design from "some great plans" is what does the trick!

The benches featured here just show you that the sky is the limit with mix and match options. From a slightly distressed blue X bench to a 100% solid Cedar bench to a reclaimed wood bench! We just love coming up with ways to tweak and add our own twist to the design.

Also...and most important...If you notice, there are NO screws showing on the outside of the bench!!! Yep..figured out how to hide the screws for the 'X' part of the bench. Just email me for the details ... (I get long winded).

Thank you Ana and everyone else who contributes here! Great site with awesome intentions....Can't wait to show you the coffee table we are working on!

-Angel
Email me here: http://www.etsy.com/shop/RyAngelsCreations

Built from Plan(s)
Estimated Cost
Depends on type of wood and the finish you are after...from $20 to $80!
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
We love to stain! Don't forget to condition the pine BEFORE staining!
Recommended Skill Level
Beginner

Mail Sorter

Submitted by abaxter2 on Thu, 05/29/2014 - 13:23

Threw this together in a couple hours with scrap wood that I had from an Ana White project I did over spring break. Had to buy some hooks and the hanging brackets and that was it. Very simple! Not sure how I'm going to finish it. I don't have time for the finishing right now anyways so I'm going to use it as is and finish it later!

Built from Plan(s)
Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Starter Project

Paoli Patio Furniture Made Easy

Submitted by Anonymous (not verified) on Tue, 08/30/2016 - 13:48

A huge thanks to Ana, her inspirational blog, and her clear and easy-to-follow plans for convincing me that I could take on and complete this project. I had lots of fun doing it!

Estimated Cost
$500 with pillows
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
2-in-1 stain and sealer (natural cedar color)
Recommended Skill Level
Beginner

Jacob's new bed

Submitted by Pammylaine on Wed, 08/08/2012 - 06:52

I built this bed for my 4 year old son over the weekend....I'll admit to a LOT of help from his Mamaw and Pawpaw. We converted it to a full-size bed instead of a twin...simply so I didn't have to buy new mattresses. We LOVE the way it turned out and he thinks he's King of his own personal "castle". Thanks for the plans!

Estimated Cost
$57.00 for lumber plus cost of paint
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
All I used on the bed was a good coat of Kilz primer (since it was new wood that hasn't had anything on it) and followed it with Valspar Bistro White in a satin finish. I would have LOVED to stain it but, the walls are pretty dark and the white really helps to brighten up the room.
Recommended Skill Level
Beginner

Comments

Pammylaine

Wed, 08/08/2012 - 06:53

I should have mentioned that we're not quite done yet. I still have to fill in holes and do a bit more touch up painting on the bed. And there is still stuff going on in the room. I just wanted to get some pictures up on here.

Pammylaine

Thu, 09/27/2012 - 08:10

Thank you :) We had to do some rearranging, the leaf blocked his small television, but it ended up looking really cute. We used lots of green (it's his favorite color and he wasn't too pleased with me for painting the room blue) and that shade really pops against the blue and white.

Chris Nelson (not verified)

Sat, 09/08/2012 - 05:48

I have a couple questions...

1) how is the mattress supported? It's not really part of the directions in the original plan? Are the boards included in your cut sheet?

2) when did you paint?

3) how much sanding did you have to do?

4)What are PH screws and PH holes?? I was thinking Phillips head, which makes sense for the screws, but not the holes.

Thanks!!! This is awesome!

Pammylaine

Mon, 09/10/2012 - 12:07

Hi :)

To answer your questions....
1.) We used 2X4's to support the mattress...They are not included in the cut sheet, they were just left overs that we had. We used 7 2X4's cut at 55 inches as supports. You will want to measure the width of your bed on the inside to make certain you have the appropriate length.

2. and 3.) We cut the boards and sanded (it felt like a lot, but with two people sanding it wasn't too bad) and painted the same day. My parents sanded and then I painted. That cut down the work time. We did have to go back the next day and do another coat on one or two boards but, it wasn't bad.

4.) I took PH Screws to be Phillips head as well, and that's what we used. 2 and 1/2 inch long ones to be exact...we got them at Lowe's...they were kind of a grey color, not the black one. PH Holes are pilot holes. We invested in a Kreg Jig Jr to make our pilot holes. It drills a hole at an angle which allows your joints to be stronger. That way your screw is biting into more wood. The Kreg Jig was about $40.00 and completely worth it. Just make sure you have a C-Clamp if you get one. We did not use a Kreg brand C-Clamp but, the next time we do a project, I'll get one.

We weren't real sure how to use the Kreg Jig so, we searched on YouTube for an instructional video..it's amazingly simple to use and the added security of having strong joints is totally worth 40 bucks.

bhoppy

Tue, 09/25/2012 - 08:09

I loved how your bed turned out! My daughter also has a full sized bed and I don't want to have to get a new mattress so I really appreciate you taking the time to post such detailed instructions on how to convert to a full sized:-)

I could be wrong, but I always thought PH stood for Pocket hole screws... They are actually a little different than phillips head because they are "self tapping” you don't have to predrill a pilot hole into the joining board in order to keep it from splitting... I usually buy the Kreg brand ones that they sell at Lowes but I have read on this site that you can buy them online that aren't the Kreg brand and they will work.

Pammylaine

Thu, 09/27/2012 - 08:08

You're probably correct about the screw thing. When I first read it that was my assumption as well. However, I was told by my dad that I was incorrect, but what does he know?! I tried to make the information that I shared as detailed as possible because I know it can be a bit of a pain in the rear end to have to try to modify something without really being sure of what you are doing.

Good luck with your build if you haven't already finished it. I'm sure she will love it as much as my son does. My only real down side to the bed is that even at 5 feet 8 and 1/2 inches tall I have to stand on my tiptoes to give my son his goodnight hug and kiss. But, whats a little stretching going to hurt? I figure I may as well get as many as I can before he decides he's too cool or old to kiss his mama.

Industr

Submitted by Anonymous (not verified) on Fri, 09/02/2016 - 18:29

I followed the basic Industrial Cart plans, but made it 36" high instead of 24"ish. We wanted a countertop type of space for tea/coffee and a shelf big enough for cereal boxes.

Lessons learned: Treatign (sanding/staining/sealing) the wood takes the most time, and regular wood fill is ugly - next time I will try to find transparent fill or leave the suface uneven.

Built from Plan(s)
Estimated Cost
$110. More than half of it was nice casters, and I had to use 4 pieces of 48" aluminum to get the heigh twe wanted
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Golden Oak + Spar Urethane
Recommended Skill Level
Starter Project

Benchright Round Side Table

These tables are part of the Benchright collection. They are not terribly hard to make, especially if you buy the 24" diameter round table top from Lowes.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Dark Walnut and Semigloss poly.
Recommended Skill Level
Intermediate

Comments

jrankintamu

Sat, 08/11/2012 - 20:18

Good lord my camera was dirty. I promise it wasn't the floor. Doesn't help that I am NOT a photographer.

Pallet Book Shelves

I found an ad in the Craig's List free section advertising two pallets on a first come, first serve basis behind the new pizza place near our apartment. I talked my dh into going a checking it out and there was one left when we got there. These pallets were HUGE! Nine feet long! It hung a good 3 feet over the end of the tailgate on my husband's truck! The manager of the pizza place wandered out while we were loading up and told us that their new pizza ovens had been delivered on the pallets. Cool story to tell our son about his bookshelves!

We got the pallet home after a quick stop at Lowe's for a crow bar. Dh taught me how to use a crow bar to remove the excess wood used to stablize the pizza oven on the pallet during shipment. I also learned that they use an insane amount of nails to put these things together! After pulling off about 40 pounds of useless scrap wood (literally, 40 pounds, these suckers were HEAVY!) I used some of our own scrap boards from other projects to make the shelves. We live in an apartment complex. People wandering by all day asked what I was doing. Even dh didn't understand exactly what I was trying to do but he went along with it and helped when I needed extra hands.

After getting it all put together, I used some left over poly-and-stain-in-one that we had left over. I got most of it stained with that but then I ran out. I haven't gotten around yet to getting some more. That will be the only cost associated with this project, the rest was free. Oh and the letters used for my son's name on the shelves. I blurred it out in the picture but I used dollar store vinyl letters to put his name on the shelf.

We anchored the shelf to the wall, it's stable and sturdy but I never doubt the ingenuity of a small child and even with the 40 pounds of wood we removed from this sucker, it is still H-E-A-V-Y!!!! Since it's going in a toddler's room I figured better safe than sorry. I went to Lowe's and asked for earthquake straps and I was told that we don't get earthquakes around here so they don't carry them.... I had to explain to her that earthquake straps also keep small children from toppling heavy furniture and she said they might have something in the childproofing area. They did have furniture straps as they called them in the childproofing area. Note to self: we no longer live in an earthquake prone area, people look at you like you've lost your mind if you want to strap your furniture down in case of earthquakes or curious small children.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
MinWax PolyShades in Antique Walnut
Recommended Skill Level
Beginner

Simple Step Stool

This is a simple wooden step stool I built for my daughter using some wood I had around the house. I wanted to build a small stool that was easy for her to carry around and access items that she needed. 

Estimated Cost
$30
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Modern Dog Bed

Submitted by Anonymous (not verified) on Fri, 03/22/2024 - 08:07

Dog Bed made using distressed (blue) pine. All it needs is the form fitted cushion.

Dane

laundry sorter

Submitted by jsa271 on Sun, 08/12/2012 - 21:09

I used the instructions from ana-white's website. Instead of building 2 separate boxes for 6 baskets, I decided to make one big sorter that would hold 6 baskets. The sorter has been an amazing help. We have a family of 6. 3 baskets for dirty and 3 baskets for folded clean clothes. 3 Dirty baskets: whites, colors, and sheets/towels. As for the other 3 baskets: 2 people per basket. The top of the sorter provides counter space to fold.

Built from Plan(s)
Estimated Cost
$35
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
White paint
Recommended Skill Level
Beginner

Comments

5 tator tots (not verified)

Tue, 08/14/2012 - 08:13

With a family of 7 (soon to be 8) we really need this. Thanks for sharing the uses of each basket. That is what I am trying to figure out. I also need the washer/dryer pedestals for dirty laundry so the dresser could just be for clean, but homeschooling and cooking for all these kids keeps me from jumping in to projects and the pedestals may be a long way off as my (very talented) husband's busy season is starting.

Treated Outdoor Beverage Table

Submitted by Niemann04 on Wed, 06/04/2014 - 12:03

This project was inspired by the post I found on Ana-White.com however I changed some of the dimensions and cut list to make it my own. I built one of these for my Mother and her and her friends keep talking about it to this day.

Estimated Cost
$145.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Outdoor entertaining
Recommended Skill Level
Beginner

Comments

Sliding Door Console

Submitted by Anonymous (not verified) on Tue, 09/06/2016 - 10:42

Our own mix for the sliding door console.  Stained the entire unit with Jacobean stain, then light grey chalk paint.  Distressed with 150/220 grit and waxed.  Top and shelves are Jacobean with 4 coats of satin polyurethane.  Absolutely love how this came out.  Roughly $300 spend at home depot on all supplies.  Wife and I finished in about 17 hours this weekend.

Estimated Cost
300.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Light Grey Chalk paint
Jacobean Stain
Satin Polyurethane
Recommended Skill Level
Intermediate

Mom's Rustic X Console

Submitted by tracysmith on Thu, 08/16/2012 - 20:18

As soon as I saw these plans, I showed my mom who fell in love with the look. She loved it but of course, we had to modify it so that it would fit her needs and fit into her space. I love it too, makes me want to build myself another tv console, but I already built myself one. ;-)

Built from Plan(s)
Estimated Cost
about $100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
I used the steel wool/vinegar solution. Cheap easy and oh so beautiful!!!!!!!
Recommended Skill Level
Beginner

Comments

Cyber Sapp

Mon, 04/28/2014 - 09:18

Can you share the dimensions of this cart. I'm looking to modify this similar to what you did. I need a smaller piece than what the plans require. Thanks in advance.

5th Project - Tilt Out Trash Can

This was my fifth project and it went pretty well. I ended up having to trim a little off the top of the door after I had it assembled because I wasn't paying attention to detail and built it to fit the back opening. It was pretty simple to size it down, though. I finished it off with some leftover black paint that I used for the top of my workbench last summer. Super happy with the way it turned out!

Estimated Cost
$50
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Behr black
Recommended Skill Level
Beginner
Back