We ordered 2 custom bookshelves using the configurator. Each is 48" x 72" and 11.5 in deep. We primed and painted the pieces first, then assembled using pocket screws. A little touch up required. We attached a back of 1/4 in plywood for a cleaner look, and attached to wall, added baseboard trim. Attached a small facing piece to top edge only. We love them!
Estimated Cost
$450
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Lightly sanded, applied Shellac primer, lightly sanded any rough spots, then applied 2 coats of white trim paint. We painted the pieces first, then assembled.
Recommended Skill Level
Intermediate
Comments
Ana White Admin
Thu, 05/06/2021 - 11:21
Thank you for using Shelf Help!
They look amazing, thanks for sharing!