Hi! I am trying to finish making the Rustic "X" Sideboard Table and I am having the hardest time making the "X". I have a compound miter saw, but I can't get the 60 degree angle to come out properly. Any advice is greatly appreciated. Thanks!
Forums
re-store design
Mon, 02/11/2013 - 14:53
X
I recently did a project that called for an x.
http://re-storedesign.com/2013/01/20/pottery-barn-hackbenches/
When I was at the point of making the X I laid the first X board hanging over the edges of where it would go. I then took a straight edge and traced the angle onto the board. I purposely made the cuts a bit long, so I could shave small amounts off to get the exact angles.
Let me know if you have any questions!
[email protected]
mmitch20
Wed, 02/13/2013 - 14:06
Perfect! Thanks for the help!
Perfect! Thanks for the help! We traced it and they look great! Thanks again!
re-store design
Wed, 02/13/2013 - 15:31
Excellent!
Excellent!